Harman Kardon GPS 500 EMC - CB Certificate ▷ View online
<11006065 001>
Page 30 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
V.3
TT power systems
N
V.4
IT power systems
Shall be evaluated during
national approval.
N
W
ANNEX W, SUMMATION OF TOUCH CURRENTS
N
W.1
Touch current from electronic circuits
N
W.1.2
Earthed circuits
N
W.2
Interconnection of several equipments
N
W.2.1
Isolation
N
W.2.2
Common return, isolated from earth
N
W.2.3
Common return, connected to protective earth
N
X
ANNEX X, MAXIMUM HEATING EFFECT IN TRANSRORMER TESTS
(see clause C.1)
N
X.1
Determination of maximum input current
N
X.2
Overload test procedure
N
Y
ANNEX Y, ULTRAVIOLET LIGHT CONDITIONING TEST (see 4.3.13.3)
N
Y.1
Test apparatus ................................................... :
N
Y.2
Mounting of test samples ................................... :
N
Y.3
Carbon-arc light-exposure apparatus ................ :
N
Y.4
Xenon-arc light exposure apparatus .................. :
N
<11006065 001>
Page 31 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
CENELEC COMMON MODIFICATIONS [C],
SPECIAL NATIONAL CONDITIONS [S] AND A-DEVIATIONS (NATIONAL DEVIATIONS) [A]
(EN 60950-1:2001, Annex ZB and Annex ZC)
P
General
C: Delete all the "country" notes in the reference
document according to the following list:
1.1.5 Note 2
1.5.8
Note 2 1.6.1 Note
1.7.2
Note 4
1.7.12
Note 2 2.6
Note
2.2.3
Note
2.2.4
Note
2.3.2 Note 2, 7, 8
2.3.3
Note 1, 2 2.3.4
Note 2,3 2.7.1 Note
2.10.3.1 Note 4
3.2.1.1 Note
3.2.3 Note 1, 2
3.2.5.1 Note 2
4.3.6
Note 1,2 4.7.2.2 Note
4.7.3.1 Note 2
6.1.2.1 Note
6.1.2.2 Note
6.2.2
Note
6.2.2.1 Note 2 6.2.2.2 Note
7
Note 4
7.1
Note
G2.1
Note 1, 2 Annex H Note 2
Deleted.
P
1.2.4.1
S (DK): Certain types of Class I appliances (see
3.2.1.1) may be provided with a plug not
establishing earthing conditions when inserted
into Danish socket-outlets.
Class II equipment.
N
1.5.1
A (SE, Ordinance 1990:944 and
CH, Ordinance on environmentally hazardous
substances SR 814.013, Annex 3.2, Mercury):
Add
NOTE – Switches containing mercury such as
thermostats, relays and level controllers are not allowed.
No such switches used.
N
1.5.8
S (NO): Due to the IT power system used (see
annex V, Fig. V.7), capacitors are required to be
rated for the applicable line-to-line voltage
(230 V).
Class II
N
1.7.2
S (FI, NO, SE): C
LASS
I
PLUGGABLE EQUIPMENT
TYPE
A intended for connection to other
equipment or a network shall, if safety relies on
connection to protective earth or if surge
suppressors are connected between the network
terminals and accessible parts, have a marking
stating that the equipment must be connected to
an earthed mains socket-outlet.
The marking text in the applicable countries shall
The marking text in the applicable countries shall
be as follows:
Class II equipment.
N
FI: "Laite on liitettävä suojamaadoitus-
koskettimilla varustettuun pistorasiaan"
Ditto.
N
NO: "Apparatet må tilkoples jordet stikkontakt"
Ditto.
N
SE: "Apparaten skall anslutas till jordat uttag"
Ditto.
N
A (DK, Heavy Current Regulations): Supply cords
of class I equipment, which is delivered without a
plug, must be provided with a visible tag with the
following text:
Vigtigt!
Vigtigt!
Lederen med grøn/gul isolation må kun tilsluttes
en klemme mærket
Ditto.
N
<11006065 001>
Page 32 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
eller
If essential for the safety of the equipment, the
tag must in addition be provided with a diagram
which shows the connection of the other
conductors, or be provided with the following text:
"For tilslutning af de øvrige ledere, se
medfølgende instalationsvejledning."
1.7.5
S (DK): Socket-outlets for providing power to
other equipment shall be in accordance with the
Heavy Current Regulations, Section 107-2-D1,
Standard Sheet DK 1-3a, DK 1-5a or DK 1-7a,
when used on Class I equipment. For stationary
equipment the socket-outlet shall be in
accordance with Standard Sheet DK 1-1b or
DK 1-5a.
Class II equipment.
N
1.7.5
A (DK, Heavy Current Regulations):
CLASS
II
EQUIPMENT
shall not be fitted with socket-
outlets for providing power to other equipment.
No socket-outlets provided.
P
1.7.12
A (DE, Gesetz über technische Arbeitsmittel
(Gerätesicherheitsgesetz) [Law on technical
labour equipment {Equipment safety law}], of 23
rd
October 1992, Article 3, 3
rd
paragraph, 2
nd
sentence, together with the "Allgemeine
Verwaltungsvorschrift zur Durchführung des
Zweiten Abschnitts des Gerätesicherheits-
gesetzes" [General administrative regulation on
the execution of the Second Section of the
Equipment safety law], of 10
th
January 1996,
article 2, 4
th
paragraph item 2):
Directions for use with rules to prevent certain
hazards for (among others) maintenance of the
technical labour equipment, also for imported
technical labour equipment shall be written in the
German language.
NOTE: Of this requirement, rules for use even only by
service personnel are not exempted.
User’s manual is provided in
German.
P
1.7.15
A (CH, Ordinance on environmentally hazardous
substances SR 814.013):
Annex 4.10 of SR 814.013 applies for batteries.
No batteries provided.
N
A (DE, Regulation on protection against hazards
by X-ray, of 8
th
January 1987, Article 5 [Operation
of X-ray emission source], clauses 1 to 4):
a) A licence is required by those who operate an
a) A licence is required by those who operate an
X-ray emission source.
b) A licence in accordance with Cl. 1 is not
b) A licence in accordance with Cl. 1 is not
required by those who operate an X-ray emission
source on which the electron acceleration voltage
does not exceed 20 kV if
1) the local dose rate at a distance of 0,1 m from
1) the local dose rate at a distance of 0,1 m from
This national difference was
deleted by A11 to EN 60950-1.
N
<11006065 001>
Page 33 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
the surface does not exceed 1 Sv/h and
2) it is adequately indicated on the X-ray
2) it is adequately indicated on the X-ray
emission source that
i) X-rays are generated and
ii) the electron acceleration voltage must not
i) X-rays are generated and
ii) the electron acceleration voltage must not
exceed the maximum value stipulated by the
manufacturer or importer.
c) A licence in accordance with Cl. 1 is also not
c) A licence in accordance with Cl. 1 is also not
required by persons who operate an X-ray
emission source on which the electron
acceleration voltage exceeds 20 kV if
1) the X-ray emission source has been granted a
1) the X-ray emission source has been granted a
type approval and
2) it is adequately indicated on the X-ray
2) it is adequately indicated on the X-ray
emission source that
i) X-rays are generated
ii) the device stipulated by the manufacturer or
i) X-rays are generated
ii) the device stipulated by the manufacturer or
importer guarantees that the maximum
permissible local dose rate in accordance with
the type approval is not exceeded and
iii) the electron acceleration voltage must not
iii) the electron acceleration voltage must not
exceed the maximum value stipulated by the
manufacturer or importer.
d) Furthermore, a licence in accordance with
d) Furthermore, a licence in accordance with
Cl. 1 is also not required by persons who operate
X-ray emission sources on which the electron
acceleration voltage does not exceed 30 kV if
1) the X-rays are generated only by intrinsically
1) the X-rays are generated only by intrinsically
safe CRTs complying with Enclosure III, No. 6,
2) the values stipulated in accordance with
2) the values stipulated in accordance with
Enclosure III, No. 6.2 are limited by technical
measures and specified in the device and
3) it is adequately indicated on the X-ray
3) it is adequately indicated on the X-ray
emission source that the X-rays generated are
adequately screened by the intrinsically safe
CRT.
2.2.4
S (NO): Requirements according to this annex,
1.7.2 and 6.1.2.1 apply.
No TNV.
N
2.3.2
S (NO): Requirements according to this annex,
6.1.2.1 apply.
No TNV.
N
2.3.3 and
2.3.4
S (NO): Requirements according to this annex,
1.7.2 and 6.1.2.1 apply.
No TNV.
N
2.6.3.3
S (GB): The current rating of the circuit shall be
taken as 13 A, not 16 A.
Not applied for.
N
2.7.1
C: Replace the subclause as follows:
Replaced.
P
Click on the first or last page to see other GPS 500 service manuals if exist.