Harman Kardon GPS 500 EMC - CB Certificate ▷ View online
<11006065 001>
Page 26 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
A.2.2
Conditioning of samples
N
A.2.3
Mounting of samples .......................................... :
N
A.2.4
Test flame (see IEC 60695-11-4)
N
Flame A, B or C ................................................. :
A.2.5
Test procedure
N
A.2.6
Compliance criteria
N
Sample 1 burning time (s)................................... :
Sample 2 burning time (s)................................... :
Sample 3 burning time (s)................................... :
A.2.7
Alternative test acc. to IEC 60695-2-2, cl. 4 and 8
N
Sample 1 burning time (s)................................... :
Sample 2 burning time (s)................................... :
Sample 3 burning time (s)................................... :
A.3
Hot flaming oil test (see 4.6.2)
N
A.3.1
Mounting of samples
N
A.3.2
Test procedure
N
A.3.3
Compliance criterion
N
B
ANNEX B, MOTOR TESTS UNDER ABNORMAL CONDITIONS
(see 4.7.2.2 and
5.3.2)
N
B.1
General requirements
N
Position .............................................................. :
Manufacturer ...................................................... :
Type ................................................................... :
Rated values ..................................................... :
B.2
Test conditions
N
B.3
Maximum temperatures
N
B.4
Running overload test
N
B.5
Locked-rotor overload test
N
Test duration (days) ........................................... :
Electric strength test: test voltage (V) ................ :
B.6
Running overload test for d.c. motors in
secondary circuits
N
B.7
Locked-rotor overload test for d.c. motors in secondary circuits
N
B.7.1
Test procedure
N
B.7.2
Alternative test procedure; test time (h) ............... :
N
<11006065 001>
Page 27 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
B.7.3
Electric strength test
N
B.8
Test for motors with capacitors
N
B.9
Test for three-phase motors
N
B.10
Test for series motors
N
Operating voltage (V) ......................................... :
C
ANNEX C, TRANSFORMERS (see 1.5.4 and 5.3.3)
P
Position .............................................................. : Refer to appended table 1.5.1.
Manufacturer ...................................................... : Refer to appended table 1.5.1.
Type ................................................................... : Refer to appended table 1.5.1.
Rated values ..................................................... : Class B
Method of protection ........................................... : By protection circuit.
C.1
Overload test
See appended table 5.3.
P
C.2
Insulation
See appended table C.2.
P
Protection from displacement of windings .......... : See appended table C.2.
P
D
ANNEX D, MEASURING INSTRUMENTS FOR TOUCH-CURRENT TESTS
(see 5.1.4)
P
D.1
Measuring instrument
P
D.2
Alternative measuring instrument
N
E
ANNEX E, TEMPERATURE RISE OF A WINDING (see 1.4.13)
N
F
ANNEX F, MEASUREMENT OF CLEARANCES AND CREEPAGE DISTANCES
(see 2.10)
P
G
ANNEX G, ALTERNATIVE METHOD FOR DETERMINING MINIMUM
CLEARANCES
N
G.1
Summary of the procedure for determining
minimum clearances
N
G.2
Determination of mains transient voltage (V)...... :
N
G.2.1
AC mains supply
N
G.2.2
DC mains supply
N
G.3
Determination of telecommunication network
transient voltage (V)............................................ :
N
G.4
Determination of required withstand voltage (V). :
N
G.5
Measurement of transient levels (V) ................... :
N
<11006065 001>
Page 28 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
G.6
Determination of minimum clearances ............... :
N
H
ANNEX H, IONIZING RADIATION (see 4.3.13)
N
J
ANNEX J, TABLE OF ELECTROCHEMICAL POTENTIALS (see 2.6.5.6)
N
Metal used ........................................................... :
K
ANNEX K, THERMAL CONTROLS (see 1.5.3 and 5.3.7)
N
K.1
Making and breaking capacity
N
K.2
Thermostat reliability; operating voltage (V)........ :
N
K.3
Thermostat endurance test; operating voltage
(V) ..................................................................... :
N
K.4
Temperature limiter endurance; operating voltage
(V) ...................................................................... :
N
K.5
Thermal cut-out reliability
N
K.6
Stability of operation
N
L
ANNEX L, NORMAL LOAD CONDITIONS FOR SOME TYPES OF ELECTRICAL
BUSINESS EQUIPMENT (see 1.2.2.1 and 4.5.1)
P
L.1
Typewriters
N
L.2
Adding machines and cash registers
N
L.3
Erasers
N
L.4
Pencil sharpeners
N
L.5
Duplicators and copy machines
N
L.6
Motor-operated files
N
L.7
Other business equipment
See 1.6.2.
P
M
ANNEX M, CRITERIA FOR TELEPHONE RINGING SIGNALS (see 2.3.1)
N
M.1
Introduction
N
M.2
Method A
N
M.3
Method B
N
M.3.1
Ringing signal
N
M.3.1.1
Frequency (Hz) .................................................. :
M.3.1.2
Voltage (V) ......................................................... :
M.3.1.3
Cadence; time (s), voltage (V) ........................... :
M.3.1.4
Single fault current (mA) ..................................... :
M.3.2
Tripping device and monitoring voltage .............. :
N
<11006065 001>
Page 29 of 71
TRF No.:IECEN60950_1B
TRF originator: SGS Fimko
IEC 60950-1 / EN 60950-1
Clause
Requirement – Test
Result – Remark
Verdict
M.3.2.1
Conditions for use of a tripping device or a
monitoring voltage
N
M.3.2.2
Tripping device
N
M.3.2.3
Monitoring voltage (V) ......................................... :
N
N
ANNEX N, IMPULSE TEST GENERATORS (see 2.10.3.4, 6.2.2.1, 7.3.2 and
clause G.5)
N
N.1
ITU-T impulse test generators
N
N.2
IEC 60065 impulse test generator
N
P
ANNEX P, NORMATIVE REFERENCES
P
Q
ANNEX Q, BIBLIOGRAPHY
P
R
ANNEX R, EXAMPLES OF REQUIREMENTS FOR QUALITY CONTROL
PROGRAMMES
N
R.1
Minimum separation distances for unpopulated
coated printed boards (see 2.10.6)
N
R.2
Reduced clearances (see 2.10.3)
N
S
ANNEX S, PROCEDURE FOR IMPULSE TESTING (see 6.2.2.3)
N
S.1
Test equipment
N
S.2
Test procedure
N
S.3
Examples of waveforms during impulse testing
N
T
ANNEX T, GUIDANCE ON PROTECTION AGAINST INGRESS OF WATER
(see 1.1.2)
N
U
ANNEX U, INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED
INSULATION (see 2.10.5.4)
P
Certified components used.
See appended table 1.5.1. for
details.
V
ANNEX V, AC POWER DISTRIBUTION SYSTEMS (see 1.6.1)
P
V.1
Introduction
See below
P
V.2
TN power distribution systems
Single-phase TN power system
considered and used for
testing.
P
Click on the first or last page to see other GPS 500 service manuals if exist.