DOWNLOAD Harman Kardon DRIVE AND PLAY 2 (serv.man3) Service Manual ↓ Size: 2.03 MB | Pages: 48 in PDF or view online for FREE

Model
DRIVE AND PLAY 2 (serv.man3)
Pages
48
Size
2.03 MB
Type
PDF
Document
EMC - CB Certificate
Brand
Device
Car Audio
File
drive-and-play-2-sm3.pdf
Date

Harman Kardon DRIVE AND PLAY 2 (serv.man3) EMC - CB Certificate ▷ View online

 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 29 of 48 
 
Version:1.0 
 
 
9.3. 
Test Data of Radiated Emission   
Product : 
drive+play 
 
Test Item 
General Radiated Emission 
Test Site 
No.3 OATS 
Test Mode 
Mode 1: Normal Operation 
 
Frequency Correct  Reading 
 
Measurement 
Margin  Limit 
 Factor 
Level 
Level  
 
MHz dB dBuV 
dBuV/m 
dB 
 
dBuV/m 
Horizontal   
 
 
 
 
 
168.005 12.889  12.860  25.749  -4.251  30.000 
196.609 12.668  12.750  25.418  -4.582  30.000 
300.034 
17.402 
15.640 
33.042 
-3.958 
37.000 
432.004 20.718  2.810  23.529 -13.471 37.000 
500.056 22.066  2.130  24.196 -12.804 37.000 
624.000 24.044  1.730  25.774 -11.226 37.000 
700.000 
24.880 
3.010 
27.890 
-9.110 
37.000 
Vertical 
 
 
 
 
 
84.010 11.726 14.040 25.766 -4.234 30.000 
120.010 15.188  13.120  28.308  -1.692  30.000 
144.000 
14.178 
14.400 
28.578 
-1.422 
30.000 
168.010 12.889  11.760  24.649  -5.351  30.000 
221.187 14.237  13.400  27.637  -2.363  30.000 
240.000 15.590  14.350  29.940  -7.060  37.000 
 
 
Note: 
1.  All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average 
measurements as necessary. 
2.  “      ” means the worst emission level. 
3.  Measurement Level = Reading Level + Correct Factor 
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 30 of 48 
 
Version:1.0 
 
 
 
9.4. Test 
Photograph 
Test Mode    : Mode 1: Normal Operation 
Description    : Front View of Radiated Test 
 
Test Mode    : Mode 1: Normal Operation 
Description    : Back View of Radiated Test 
 
 
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 31 of 48 
 
Version:1.0 
 
 
9.5. 
Test Data of Electrostatic Discharge 
Product : 
drive+play 
 
Test Item 
Electrostatic Discharge   
Test Site 
No.3 Shielded Room 
Test Mode 
Mode 1: Normal Operation 
 
Item 
Amount of 
Discharge 
Voltage 
Required 
Criteria 
Complied To 
Criteria (A, B, C) 
Results 
Air Discharge   
10 
10 
+8kV 
-8kV 


Pass 
Pass 
Contact Discharge 
25 
25 
+4kV 
-4kV 


Pass 
Pass 
Indirect Discharge 
(HCP) 
10 
10 
+4kV 
-4kV 


Pass 
Pass 
Indirect Discharge 
(VCP Front) 
10 
10 
+4kV 
-4kV 


Pass 
Pass 
Indirect Discharge 
(VCP Left) 
10 
10 
+4kV 
-4kV 


Pass 
Pass 
Indirect Discharge 
(VCP Back) 
10 
10 
+4kV 
-4kV 


Pass 
Pass 
Indirect Discharge 
(VCP Right) 
10 
10 
+4kV 
-4kV 


Pass 
Pass 
 
   
 Note: 
The testing performed is from lowest level up to the highest level as required by standard, but only highest 
level is shown on the report. 
 
 
NR: No Requirement 
  Meet criteria A: Operate as intended during and after the test 
  Meet criteria B: Operate as intended after the test 
  Meet criteria C: Loss/Error of function 
 Additional 
Information 
  EUT stopped operation and could / could not be reset by operator at           kV. 
  No false alarms or other malfunctions were observed during or after the test.   
 
 
Report No. 078214R-RFCEP02V01
 
 
 
 
Page : 32 of 48 
 
Version:1.0 
 
 
9.6. Test 
Photograph 
Test Mode    :Mode 1: Normal Operation 
Description  : ESD Test Setup 
 
Page of 48
Display

Click on the first or last page to see other DRIVE AND PLAY 2 (serv.man3) service manuals if exist.