Harman Kardon SOUNDSTICKS III (serv.man2) EMC - CB Certificate ▷ View online
IEC 60950-1 (ed.2)
- Page 2 of 3 -
www.nemko.com
Report No. 158002
7
Appliances rated
3 kW or connected
to fixed wiring
to fixed wiring
Electric appliance
3 kW must be
connected to fixed wiring. All
connection to fixed wiring must be in
accordance with Code of Practice
CP5.
connection to fixed wiring must be in
accordance with Code of Practice
CP5.
The rated power is
less than 3kW.
less than 3kW.
N/A
8
Detachable power
cord set (consists
of mains plug,
mains cord and
appliance
connector
cord set (consists
of mains plug,
mains cord and
appliance
connector
Detachable power cord set must be
listed in the test report critical
component list.
listed in the test report critical
component list.
Class III equipment.
N/A
9
Circuit diagrams
Circuit diagrams must be indicated
with component’s values for
products tested to IEC 60065 and
IEC 60950.
with component’s values for
products tested to IEC 60065 and
IEC 60950.
Complies. P
10
Circuit diagrams of
electronic modules
in electrical
appliances
electronic modules
in electrical
appliances
Circuit diagrams of the electronic
modules in the electrical appliances
must be provided.
modules in the electrical appliances
must be provided.
Provided. P
11
Controlled goods
likely to be treated
as toy by children
likely to be treated
as toy by children
Controlled goods, having an
enclosure, which is shaped and
decorated so that it is likely to be
treated as a toy by children, shall
not be accepted for certification and
registration.
enclosure, which is shaped and
decorated so that it is likely to be
treated as a toy by children, shall
not be accepted for certification and
registration.
The equipment is
not treated as toy
by children.
not treated as toy
by children.
N/A
Applicable to AC adaptor
13
3-pin AC adaptor
Test report showing that the 3-pin
complied with sub-clauses 12.1 &
12.3 of SS 246 must be submitted.
complied with sub-clauses 12.1 &
12.3 of SS 246 must be submitted.
Class III equipment.
N/A
14
2-pin
AC
adaptor
The 2-pin (Appendix W) shall
comply with IEC 83: 1975 (Standard
C5, Version II) or EN 50075
comply with IEC 83: 1975 (Standard
C5, Version II) or EN 50075
Class III equipment.
N/A
15
Detachable power
supply cord set not
supplied by
Registered
Supplier
supply cord set not
supplied by
Registered
Supplier
Registered Supplier who is not
supplying the detachable power
supply cord set together with the AC
Adaptor must provide written
instruction to its customer on the
type of approved detachable power
cord set to use.
supplying the detachable power
supply cord set together with the AC
Adaptor must provide written
instruction to its customer on the
type of approved detachable power
cord set to use.
Class III equipment.
N/A
Applicable to computer products
16
CD/DVD ROM
(used in personal
computer)
(used in personal
computer)
Test certificate showing that
CD/DVD ROM has complied with
IEC 825 must be provided.
CD/DVD ROM has complied with
IEC 825 must be provided.
The equipment
does not consist of
CD/DVD ROM.
does not consist of
CD/DVD ROM.
N/A
17
Modem Card (used
in personal
computer)
in personal
computer)
Modem card incorporated in the
personal computer must be tested
at set level (sub-clauses 5.1 & 6 of
personal computer must be tested
at set level (sub-clauses 5.1 & 6 of
The equipment
does not consist of
Modem Card.
does not consist of
Modem Card.
N/A
IEC 60950-1 (ed.2)
- Page 3 of 3 -
www.nemko.com
Report No. 158002
IEC 60950) or at component level.
Applicable to plasma/LCD display monitor
35
Plasma/LCD
display monitor
with TV tuner
display monitor
with TV tuner
Plasma/LCD display monitor tested
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
to IEC 60950 would require
additional test to clauses 9 (related
to antenna only), 10.1, 10.2, 10.3
and 12.5 of IEC 60065.
No TV tuner
provided.
provided.
N/A
IEC 60950-1 (ed.2)
- Page 1 of
7
-
www.nemko.com
Report No. 158002
IEC 60950-1:2005
Clause
Requirements – Test
Result – Remark
Verdict
USA - Differences to IEC 60950-1:2005, Second Edition
1.1
Equipment able to be installed in accordance
with the National Electrical Code ANSI/NFPA 70
with the National Electrical Code ANSI/NFPA 70
Class III equipment.
—
1.1.1
Equipment able to be installed in accordance
with ANSI/NFPA 75 and NEC Art. 645 unless
intended for use outside of computer room and
provided with such instructions.
with ANSI/NFPA 75 and NEC Art. 645 unless
intended for use outside of computer room and
provided with such instructions.
Class III equipment.
N/A
1.1.2
Equipment in wire-line communication facilities
serving high-voltage electric power stations
operating at greater than 1kV are excluded.
serving high-voltage electric power stations
operating at greater than 1kV are excluded.
Class III equipment.
N/A
1.1.2
Equipment intended for outdoor use
Not used outdoor
N/A
1.4.14
For Pluggable Equipment Type A, the protection
in the installation is assumed to be 20 A.
in the installation is assumed to be 20 A.
Class III equipment.
N/A
1.5.1
All IEC standards for components identified in
Annex P.1 replaced by the relevant requirements
of UL component standards in Annex P.1.
Annex P.1 replaced by the relevant requirements
of UL component standards in Annex P.1.
See table 1.5.1 in main test
report.
report.
P
1.5.1
All IEC standards for components identified in
Annex P.2 alternatively satisfied by the relevant
requirements of UL component standards
Annex P.2 alternatively satisfied by the relevant
requirements of UL component standards
See table 1.5.1 in main test
report.
report.
P
1.5.5
Interconnecting cables acceptable for the
application regarding voltage, current,
temperature, flammability, mechanical
serviceability and the like.
application regarding voltage, current,
temperature, flammability, mechanical
serviceability and the like.
Suitable interconnecting cable
used.
used.
P
1.5.5
For other than limited power and TNV circuits,
the type of output circuit identified for output
connector.
the type of output circuit identified for output
connector.
No TNV circuit
N/A
1.5.5
External cable assemblies that exceed 3.05 m in
length to be types specified in the NEC
length to be types specified in the NEC
Class III equipment.
N/A
1.5.5
Detachable external interconnecting cables 3.05
m or less in length and provided with equipment
marked to identify the responsible organization
and the designation for the cable
m or less in length and provided with equipment
marked to identify the responsible organization
and the designation for the cable
Class III equipment.
N/A
1.5.5
Building wiring and cable for use in ducts,
plenums and other air handling space subject to
special requirements and excluded from scope.
plenums and other air handling space subject to
special requirements and excluded from scope.
Considered.
—
1.5.5
Telephone line and extension cords and the like
comply with UL 1863
comply with UL 1863
No TNV circuit
N/A
1.6.1.2 Equipment
intended
for connection to a d.c.
power (mains) distribution system subjected to
special circuit classification requirements (e.g.,
TNV-2)
special circuit classification requirements (e.g.,
TNV-2)
Class III equipment.
N/A
1.6.1.2
Earthing of d.c. powered equipment provided
Class III equipment.
N/A
1.7
Lamp replacement information indicated on
lampholder in operator access area
lampholder in operator access area
No lamp provided.
N/A
1.7.1
Special marking format for equipment intended
for use on a supply system with an earthed
neutral and more than one phase conductor
for use on a supply system with an earthed
neutral and more than one phase conductor
Class III equipment.
N/A
1.7.1
Equipment voltage rating not higher than rating of
the plug except under special conditions
the plug except under special conditions
No plug provided.
—
IEC 60950-1 (ed.2)
- Page 2 of 7 -
www.nemko.com
Report No. 158002
1.7.6
Fuse replacement marking for operator
accessible fuses
accessible fuses
No operator accessible fuses.
N/A
1.7.7
Identification of terminal connection of the
equipment earthing conductor
equipment earthing conductor
No such terminal connection.
—
1.7.7
Connectors and field wiring terminals for external
Class 2 or Class 3 circuits provided with marking
indicating minimum Class of wiring to be used.
Class 2 or Class 3 circuits provided with marking
indicating minimum Class of wiring to be used.
No such terminal used.
N/A
1.7.7
Marking located adjacent to terminals and visible
during wiring
during wiring
No such terminal used.
N/A
2.1.1.1
Bare TNV conductive parts protected by a cover
are exempt if instructions include directions for
disconnection of TNV prior to removal of the
cover
are exempt if instructions include directions for
disconnection of TNV prior to removal of the
cover
No TNV circuity.
N/A
2.3.1.b Other
telecommunication signaling systems than
described in 2.3.1(b) are subject to M.4.
No TNV circuity.
N/A
2.3.1.b
For TNV-2 and TNV-3 circuits with other than
ringing signals and with voltages exceeding 42.4
Vp or 60 V d.c., the max. current limit through a
resistor ≥ 2000 Ohm with loads disconnected is
7.1 mA peak or 30 mA d.c. under normal
conditions
ringing signals and with voltages exceeding 42.4
Vp or 60 V d.c., the max. current limit through a
resistor ≥ 2000 Ohm with loads disconnected is
7.1 mA peak or 30 mA d.c. under normal
conditions
No TNV circuity.
N/A
2.3.1.b
Limits for measurements across 5000 Ohm
resistor in the event of a single fault are replaced
after 200 ms with the limits of M.3.1.4.
resistor in the event of a single fault are replaced
after 200 ms with the limits of M.3.1.4.
No TNV circuity.
N/A
2.3.2.1
For a single fault, the limits of 2.2.3 apply to
SELV circuits and accessible conductive parts.
SELV circuits and accessible conductive parts.
No TNV circuity.
N/A
2.3.2.4
Enamel coating on signal transformer winding
wire allowed as an alternative to Basic insulation
in specific telecommunication applications if
subject to special construction requirements and
testing
wire allowed as an alternative to Basic insulation
in specific telecommunication applications if
subject to special construction requirements and
testing
No TNV circuity.
N/A
2.5
Overcurrent protection device required for Class
2 and Class 3 limiting according to the NEC, or
for a Limited Power Source, not interchangeable
with devices of higher ratings if operator
replaceable
2 and Class 3 limiting according to the NEC, or
for a Limited Power Source, not interchangeable
with devices of higher ratings if operator
replaceable
No such device.
N/A
2.6
Equipment having receptacles for output a.c.
power connectors generated from an internal
separately derived source have the earthed
(grounded) circuit conductor suitably bonded to
earth.
power connectors generated from an internal
separately derived source have the earthed
(grounded) circuit conductor suitably bonded to
earth.
Class III equipment.
N/A
2.6.3.3
For Pluggable Equipment Type A, if a) b) or c)
are not applicable, the current rating of the circuit
is taken as 20 A
are not applicable, the current rating of the circuit
is taken as 20 A
Class III equipment.
—
2.6.3.4
Capacity of connection between earthing terminal
and parts required to be earthed subject to
special conditions based on the current rating of
the circuit.
and parts required to be earthed subject to
special conditions based on the current rating of
the circuit.
Class III equipment.
—
2.6.4.1
Field wiring terminals for earthing conductors
suitable for wire sizes (gauge) used in US
suitable for wire sizes (gauge) used in US
Class III equipment.
N/A
2.7.1
Data for selection of special external branch
circuit overcurrent devices marked on the
equipment
circuit overcurrent devices marked on the
equipment
Class III equipment.
N/A
Click on the first or last page to see other SOUNDSTICKS III (serv.man2) service manuals if exist.