Harman Kardon SB 35 Sabre (serv.man2) EMC - CB Certificate ▷ View online
Page 5 of 41
Report No.: ACSCBAV13005
TRF No. IEC60065K
Subwoofer (SABRE SB35SUB)
Page 6 of 41
Report No.: ACSCBAV13005
TRF No. IEC60065K
Test item particulars .................................................. :
Classification of installation and use ...................... : Table-top or wall-mounted, not portable
(for model SABRE SB35CNTR)
Table-top, not portable
(for model SABRE SB35SUB)
Table-top, not portable
(for model SABRE SB35SUB)
Supply Connection .................................................... : Not directly connected to the mains
(for model SABRE SB35CNTR)
Detachable power supply cord
(for model SABRE SB35SUB)
Detachable power supply cord
(for model SABRE SB35SUB)
Possible test case verdicts:
- test case does not apply to the test object .......... : N/A (Not Applicable)
- test object does meet the requirement ................. : Pass
- test object does not meet the requirement .......... : Fail
Testing:
Date of receipt of test item........................................ : May 20, 2013
Date (s) of performance of tests .............................. : May 20, 2013 to June 10, 2013
Date (s) of performance of tests .............................. : May 20, 2013 to June 10, 2013
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see Enclosure #)” refers to additional information appended to the report.
”(see appended table)” refers to a table appended to the report.
Throughout this report a
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
”(see Enclosure #)” refers to additional information appended to the report.
”(see appended table)” refers to a table appended to the report.
Throughout this report a
comma /
point is used as the decimal separator.
Manufacturer’s Declaration per sub-clause 6.2.5 of IECEE 02:
The application for obtaining a CB Test Certificate
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ......................................................:
includes more than one factory location and a
declaration from the Manufacturer stating that the
sample(s) submitted for evaluation is (are)
representative of the products from each factory
has been provided ......................................................:
Yes
Not applicable
Not applicable
When differences exist; they shall be identified in the General product information section.
Name and address of factory (ies)…………:
1. TCL TECHNOLY ELECTRONICS (HUIZHOU) CO.,
LTD
Section 19, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
LTD
Section 19, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
2. TCL TECHNOLY ELECTRONICS (HUIZHOU) CO.,
LTD
Section 37, Zhongkai High-tech Development Zone,
Huizhou City, Guang Dong Province, China, 516006
Page 7 of 41
Report No.: ACSCBAV13005
TRF No. IEC60065K
General product information:
Report Summary
Product Description
1 This equipment under test (EUT) with model SABRE SB35 is a Soundbar Speaker System which
combines a BT soundbar with model SABRE SB35CNTR and a wireless subwoofer with model SABRE
SB35SUB. This system is provided with optical, HDMI input, HDMI output at rear enclosure and IR
remote control for most of all functions.
SB35SUB. This system is provided with optical, HDMI input, HDMI output at rear enclosure and IR
remote control for most of all functions.
2 SABRE SB35CNTR is supplied by approved External Approval Adaptor. The soundbar is housed within
top plastic enclosure and bottom metal enclosure. Electronic components are mounted on PWB.
3 SABRE SB35SUB with a built-in power supply board is supplied by the AC Mains. The subwoofer is
housed within plastic enclosure and electronic components are mounted on PWB.
4 The soundbar controls subwoofer via wireless signal and subwoofer cannot operate by itself. Normal
operation as the soundbar sent signal to subwoofer via wireless signal, generated sound and controlled
system by IR remote. And the subwoofer operated by signal from soundbar.
system by IR remote. And the subwoofer operated by signal from soundbar.
Model Differences
N/A
Additional Information
N/A
Technical Considerations
1 Mass of equipment:
Approx. 2.65 kg for Soundbar (SABRE SB35CNTR), and 5.85 kg for Subwoofer (SABRE SB35SUB)
2 The equipment under test (EUT) has been evaluated for moderate and tropical climates.
3 This soundbar also could be mounted on the wall. Its user’s manual specified the relevant information
for mounting accessories.
Page 8 of 41
Report No.: ACSCBAV13005
IEC 60065
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60065K
3 General
requirements
-
Safety class of the apparatus .................................. :
Class II.
Pass
4
General test conditions
-
4.1.4
Ventilation instructions require the use of the test
box
box
Yes. Pass
5
Marking and instructions
-
Comprehensible and easily discernible
Pass
Permanent durability against water and petroleum
spirit
spirit
Pass
5.1
a) Identification, maker .............................................: harman/kardon
Pass
b) Model number or type reference..........................: SABRE SB35,
SABRE SB35CNTR,
SABRE SB35SUB
SABRE SB35SUB
Pass
c) Class II symbol if applicable ................................:
for SABRE SB35SUB
Pass
d) Nature of supply....................................................: For SABRE SB35CNTR:
For SABRE SB35SUB:
Pass
e) Rated supply voltage ...........................................: For SABRE SB35CNTR: 24V
For SABRE SB35SUB:
100-240V
100-240V
Pass
f) Mains frequency if safety dependant ...................: For SABRE SB35CNTR:
DC supplied
For SABRE SB35SUB:
50/60Hz
For SABRE SB35SUB:
50/60Hz
Pass
g) Rated current or power consumption for
apparatus supplied by supply apparatus for general
use ............................................................................:
apparatus supplied by supply apparatus for general
use ............................................................................:
N/A
Measured current or power consumption ...............:
N/A
Deviation
%
(max 10%) ...........................................:
N/A
h) Rated current or power consumption for apparat-
us intended for connection to an a.c. mains supply.:
us intended for connection to an a.c. mains supply.:
For SABRE SB35CNTR: 2.7A
For SABRE SB35SUB: 100W
For SABRE SB35SUB: 100W
Pass
Measured current or power consumption ...............: See appended table 7.1.
Pass
Measured current or power consumption for
Television set ...........................................................:
Television set ...........................................................:
N/A
Deviation
%
(max 10%) ...........................................:
Pass
5.2
a) Earth terminal
No such terminals.
N/A
b) Hazardous live terminals
No such terminals.
N/A
c) Markings on supply output terminals
No such terminals.
N/A
5.3
a) Use of triangle with exclamation mark
For SABRE SB35SUB, such
symbol is indicated on circuit
diagram for specific
components.
symbol is indicated on circuit
diagram for specific
components.
Pass
Click on the first or last page to see other SB 35 Sabre (serv.man2) service manuals if exist.