Harman Kardon DVD 39 (serv.man2) EMC - CB Certificate ▷ View online
-
Page 37 of 42 -
Report
No.
98390
Monitored point:
Under fault conditions specified below - continued
Under fault conditions specified below - continued
dT (K)
Limit dT (K)
#)
*), C954, S-c;
Signal output off immediately. Input current stabilised at 0,029A.
No component damaged. No hazard (Tested time: 20 min).
Signal output off immediately. Input current stabilised at 0,029A.
No component damaged. No hazard (Tested time: 20 min).
N/A N/A
*), D935 (A to C), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 20 min).
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 20 min).
N/A N/A
*), C951, S-c;
Signal output off immediately. Input current stabilised at 0,029A.
No component damaged. No hazard (Tested time: 20 min).
Signal output off immediately. Input current stabilised at 0,029A.
No component damaged. No hazard (Tested time: 20 min).
N/A N/A
*), D933 (A to C), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,023A. No component damaged.
No hazard (Tested time: 36 min).
FL display and signal output off immediately.
Input current stabilised at 0,023A. No component damaged.
No hazard (Tested time: 36 min).
N/A N/A
*), C937, S-c;
FL display and signal output off immediately.
TF91 coil winding temperature stabilised. Input current stabilised at 0,025A.
No hazard (Tested time: 1 hr 40 min).
FL display and signal output off immediately.
TF91 coil winding temperature stabilised. Input current stabilised at 0,025A.
No hazard (Tested time: 1 hr 40 min).
TF91 transf.
21,8
TF91 transf.
90 ***)
*), D931 (A to C), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,023A. No component damaged.
No hazard (Tested time: 1 hr).
FL display and signal output off immediately.
Input current stabilised at 0,023A. No component damaged.
No hazard (Tested time: 1 hr).
N/A N/A
*), C931, S-c;
Signal output off immediately. TF91 coil winding temperature stabilised.
Input current stabilised at 0,030A. No component damaged.
No hazard (Tested time: 2 hr 30 min).
Signal output off immediately. TF91 coil winding temperature stabilised.
Input current stabilised at 0,030A. No component damaged.
No hazard (Tested time: 2 hr 30 min).
TF91 transf.
30,2
TF91 transf.
90 ***)
*), PC92 (pin1 to pin2), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 1 hr).
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 1 hr).
N/A N/A
*), PC92 (pin3 to pin4), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 30 min).
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 30 min).
N/A N/A
*), PC93 (pin3 to pin4), S-c;
Normal operated. Input current stabilised at 0,150A.
No component damaged. No hazard (Tested time: 20 min).
Normal operated. Input current stabilised at 0,150A.
No component damaged. No hazard (Tested time: 20 min).
N/A N/A
*) Tested voltage 253V **) Tested voltage 198V
***) Minus 10K applied for thermo-couple method for windings
#) Temperature rise limits for Singapore is 10K less
F No = Fault Number, S-c = Short-circuit, Dis = Disconnection, O-I = Over Loaded
-
Page 38 of 42 -
Report
No.
98390
Monitored point:
Under fault conditions specified below - continued
Under fault conditions specified below - continued
dT (K)
Limit dT (K)
#)
*), PC93 (pin1 to pin2), S-c;
FL display and signal output off immediately.
Input current changed between 0,037A to 0,028A.
No component damaged. No hazard (Tested time: 1 hr).
FL display and signal output off immediately.
Input current changed between 0,037A to 0,028A.
No component damaged. No hazard (Tested time: 1 hr).
N/A N/A
*), PC91 (pin1 to pin2), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 1 hr).
FL display and signal output off immediately.
Input current stabilised at 0,029A. No component damaged.
No hazard (Tested time: 1 hr).
N/A N/A
*), PC91 (pin3 to pin4), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,019A. No component damaged.
No hazard (Tested time: 20 min).
FL display and signal output off immediately.
Input current stabilised at 0,019A. No component damaged.
No hazard (Tested time: 20 min).
N/A N/A
*), D932 (A to C), S-c;
FL display and signal output off immediately.
Input current stabilised at 0,024A. No component damaged.
No hazard (Tested time: 20 min).
FL display and signal output off immediately.
Input current stabilised at 0,024A. No component damaged.
No hazard (Tested time: 20 min).
N/A N/A
*), C936, S-c;
Signal output off immediately. Input current stabilised at 0,023A.
D945 and D932 damaged. No hazard (Tested time: 30 min).
Signal output off immediately. Input current stabilised at 0,023A.
D945 and D932 damaged. No hazard (Tested time: 30 min).
N/A N/A
*), USB terminal (5Vdc- GND), S-c;
Normal operated. Input current stabilised at 0,160A.
No component damaged. No hazard (Tested time: 3hr 20 min).
No component damaged. No hazard (Tested time: 3hr 20 min).
N/A N/A
*), Ventilation opening (Blocked);
Normal operated.
Temperature rise measured for
1)
Normal operated.
Temperature rise measured for
1)
LF91 coil
2) LF92 coil
3) TF91 coil
4) TF92 coil
5) PWB near IC21 (see right column for result).
Input current stabilised at 0,149A.
Dielectric strength test OK.
3) TF91 coil
4) TF92 coil
5) PWB near IC21 (see right column for result).
Input current stabilised at 0,149A.
Dielectric strength test OK.
No hazard. (Tested time: 4 hr)
1)
25,5
2)
24,4
3)
25,9
4)
45,1
5)
43,6
1) 90 ***)
2) 90 ***)
3) 90 ***)
4) 90 ***)
2) 90 ***)
3) 90 ***)
4) 90 ***)
5) 110
*) Tested voltage 253V **) Tested voltage 198V
***) Minus 10K applied for thermo-couple method for windings
#) Temperature rise limits for Singapore is 10K less
F No = Fault Number, S-c = Short-circuit, Dis = Disconnection, O-I = Over Loaded
-
Page 39 of 42 -
Report
No.
98390
14
TABLE: list of critical components and materials
P
Component
Manufacturer/
trademark
Type/model
Value / rating
Standard
Approval/
Reference *)
Primary connect
or (CN91)
or (CN91)
Yeonho Elect.
YW-396
YH-396
YH-396
5A/250V, V-0
IEC60065
1.), UL
1.), UL
1.), UL
Transformer
(TF91)
Bobbin
(TF91)
Bobbin
Material
alt.
alt.
alt.
Kwang Sung
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
CLT9Z042ZE
PF2736
PM-8375
T-355J
PF2736
PM-8375
T-355J
Class A,
V-0, 150
V-0, 150
°C, PF
V-0, 150
°C, PF
V-0, 150
°C, PF
IEC60065
clause 14.3
UL94
UL94
UL94
clause 14.3
UL94
UL94
UL94
1.)
UL, E61040
UL, E41429
UL, E59481
UL, E61040
UL, E41429
UL, E59481
Transformer
(TF92)
Bobbin
(TF92)
Bobbin
Material
alt.
alt.
alt.
Kwang Sung
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
CLT9Z043ZE
PF2736
PM-8375
T-355J
PF2736
PM-8375
T-355J
Class A,
V-0, 150
V-0, 150
°C, PF
V-0, 150
°C, PF
V-0, 150
°C, PF
IEC60065
clause 14.3
UL94
UL94
UL94
clause 14.3
UL94
UL94
UL94
1.)
UL, E61040
UL, E41429
UL, E59481
UL, E61040
UL, E41429
UL, E59481
Line filter
(LF91)
Coil Stand
(LF91)
Coil Stand
TNC CO.,LTD
Hexion Specialty
Hexion Specialty
CVA30180J
PF2736
PF2736
Class A,
V-0, 150
V-0, 150
°C, PF
IEC60065
UL94
UL94
1.)
UL, E61040
UL, E61040
Line filter
(LF92)
Bobbin Material
alt.
alt.
(LF92)
Bobbin Material
alt.
alt.
Kwang Sung
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
Hexion Specialty
Sumitomo Bak.
Chang Chun Pla.
CLZ9Z072Z
PF2736
PM-8375
T-355J
PF2736
PM-8375
T-355J
Class A,
V-0, 150
V-0, 150
°C, PF
V-0, 150
°C, PF
V-0, 150
°C, PF
IEC60065
UL94
UL94
UL94
UL94
UL94
UL94
1.)
UL, E61040
UL, E41429
UL, E59481
UL, E61040
UL, E41429
UL, E59481
Mains fuse
(F901)
alt.
Littelfuse
Orisel Co. Ltd.
Orisel Co. Ltd.
218 series
50T
50T
T2A L 250V
IEC60127
SEMKO
VDE
VDE
Laser Pick-up
alt.
Laser Diode
alt.
alt.
alt.
Laser Diode
alt.
alt.
Sanyo Electric.
Toshiba Corp.
Toshiba Corp.
NEC Corp.
Toshiba Corp.
Toshiba Corp.
NEC Corp.
SF-HD65
SF-HD850
TOLD2000FDA
TOLD2000MDA
NV6D01FT
SF-HD850
TOLD2000FDA
TOLD2000MDA
NV6D01FT
Class 1
Wavelength (λ):
DVD:650±10nm
CD:790±15nm
Wavelength (λ):
DVD:650±10nm
CD:790±15nm
IEC60825-1
Edition 1.2
Edition 1.2
JQA report no.:
384-50175-1 for
type, SF-HD65
384-60270-1 for
type, SF-HD850
type, SF-HD65
384-60270-1 for
type, SF-HD850
DVD Mecha.
housing material
alt.
housing material
alt.
Toray Industries.
DAINIPPON INK
IDEMITSU Kosan
DAINIPPON INK
IDEMITSU Kosan
A390M60
FZ-3805
SS170
FZ-3805
SS170
V-0
V-0
94HB
V-0
94HB
UL94
UL94
UL94
UL94
UL94
UL, E41797
UL, E53829
UL, E48268
UL, E53829
UL, E48268
Optocoupler
(PC91 - PC93)
alt.
alt.
alt.
Kodenshi Korea
Lite-on Elect.
Vishay Semicond.
Everight Elect.
Lite-on Elect.
Vishay Semicond.
Everight Elect.
PC-17L1
LTV817
TCET1103
EL817
LTV817
TCET1103
EL817
- Viso ; >3000V
- Int. dist.: >4mm
- Ext. dist.: >6mm
- Int. dist.: >4mm
- Ext. dist.: >6mm
IEC60950
IEC60950
IEC60950
IEC60950
IEC60950
IEC60950
IEC60950
SEMKO
VDE
FIMKO
VDE
VDE
FIMKO
VDE
*) Marks listed under “Marks of conformity granted” indicates that Nemko has verified certifications respectively
1.) Tested as part of the Apparatus according to EN 60 065 / IEC 60065, 7.Edition : 2002
-
Page 40 of 42 -
Report
No.
98390
14
TABLE: list of critical components and materials- continued
P
Component
Manufacturer/
trademark
Type/model
Value / rating
Standard
Approval/
Reference **)
Mains cord set
(For CENELEC
Countries and
Singapore)
(For CENELEC
Countries and
Singapore)
Kenic Elect.
MFG
Kenic Elect.
MFG
Kenic Elect.
MFG
KE-21
H03VVH2-F
KE-22C
H03VVH2-F
KE-22C
2.5A/250V
0.75mm
0.75mm
2
x 2
2.5A/250V
IEC 60884-1
VDE
VDE
VDE
VDE
VDE
Mains plug /
cord / connector
(Other countries)
cord / connector
(Other countries)
Not evaluated,
ref. Summary of
testing
ref. Summary of
testing
___
___ ___ ___
X-capacitor
(CX91, CX92)
alt.
alt.
alt.
alt.
alt.
Carli Elec.
Pilkor Elect.
Yuchang Elect.
Okaya Electric
Pilkor Elect.
Yuchang Elect.
Okaya Electric
MPX
PCX2 335M
WBU1942
RE104
PCX2 335M
WBU1942
RE104
0.10uF/275 V,
X2
X2
IEC60384-14,
2
2
nd
ed.
VDE
VDE
VDE
VDE
VDE
VDE
VDE
Y-Capacitor
(CY91, CY92,
CY93, CY94)
alt.
alt.
(CY91, CY92,
CY93, CY94)
alt.
alt.
Netron Tech
Murata Mfg.
Samwha Cap.
Dae Myung Elect.
Du San Industrial.
Murata Mfg.
Samwha Cap.
Dae Myung Elect.
Du San Industrial.
AD
KX
SD
DG
NK
KX
SD
DG
NK
1000pF, 250V,
Y1
Y1
IEC60384-14,
2
2
nd
ed.
FIMKO
FIMKO
FIMKO
FIMKO
FIMKO
FIMKO
FIMKO
FIMKO
FIMKO
Enclosure Mtl.
Chassis body
Front panel
alt.
Display window
alt.
Chassis body
Front panel
alt.
Display window
alt.
Various
KUMHO
Various
Mitsubishi Rayon
Various
Sheet steel
HFA-452
Various
MF001
Various
Min. 0,9mm thick
V-2, 1,4mm thick
V-2 or better
Min. 2,0mm thick
HB, Min. 2.0 mm
HB or better
Min. 2,0mm thick
-
UL94
UL94
UL94
UL94
1.)
UL, E65424
UL
UL, E54695
UL
Appliance inlet
Rong Feng
RF-180
2.5A/250V
IEC60320
VDE
Varistor (VT91) Samwha Cap
SVC471D14A
470Vdc,
4500Ap
4500Ap
(8/20us)
IEC61051-2 VDE
After mains fuse
F901
F901
NTC-thermistor
(TH91)
(TH91)
DSC Electronics. DSC-10D-9
10
Ω, 3A at 25°C - 1.)
Cap. D
ischarge
resistor (R901)
Various Various 1 M
Ω, 1/2W
- 1.)
After mains fuse
F901
F901
Insulation *)
Mitsubishi Eng. NF2000
V-2, 0,4mm thick UL94
UL,
E41179
PCB material
Various
Various
V-0, Min. 105
°C
UL796 UL
*) Insulation sheet between top side of the SMPS and metal chassis
**)
Marks listed under “Marks of conformity granted” indicates that Nemko has verified certifications respectively
1.) Tested as part of the Apparatus according to EN 60 065 / IEC 60065, 7.Edition : 2002
Click on the first or last page to see other DVD 39 (serv.man2) service manuals if exist.