Harman Kardon AVR 80MK II (serv.man4) User Manual / Operation Manual ▷ View online
Front Panel Information Display
¡
“Visual” Indicator:
These indica-
tors display which input source is
being fed to the video monitor output.
being fed to the video monitor output.
™
Test:
This indicator flashes when
the output levels are being set using
the built in test signal generator.
the built in test signal generator.
£
Memo:
This indicator flashes
when the
Memo
button is pressed
when entering presets and other
information into the tuner’s memory.
information into the tuner’s memory.
¢
Auto:
This indicator signifies that
the Automatic Tuning mode is in use
for FM broadcasts.
for FM broadcasts.
∞
Tuned:
This indicator lights when
an AM or FM station is properly
tuned and locked.
tuned and locked.
§
Stereo:
This indicator lights
when an FM station is broadcasting
in stereo.
in stereo.
¶
Volume indication:
The last two
indicators on the information display
indicate the volume level. Note that
indicate the volume level. Note that
0dB
is the reference level, not an
indication that there is no output.
•
Tuner Frequency Indication:
When the tuner is in use, the main
Information Display will show the
preset channel number, if any, the
frequency band and the station fre-
quency. Indicators at the right side
of the display show
Information Display will show the
preset channel number, if any, the
frequency band and the station fre-
quency. Indicators at the right side
of the display show
kHz
when an AM
station is tuned or
MHz
when an FM
station is tuned.
ª
Main Information Display:
This
ten digit display shows messages
relating to the status, input source,
surround mode, tuner, volume level
or other aspects of unit’s operation.
relating to the status, input source,
surround mode, tuner, volume level
or other aspects of unit’s operation.
‚
Multi:
This indicator signifies that
the AVR80
II
is sending a program
source to a remote room location.
Note that it may be illuminated even
when the unit is “off” in the main lis-
tening room, signifying that opera-
tion continues at another location.
When a remote command is being
received via the
Note that it may be illuminated even
when the unit is “off” in the main lis-
tening room, signifying that opera-
tion continues at another location.
When a remote command is being
received via the
Multi
IR connection,
this indicator will flash.
⁄
Mode Status:
These indicators
display the currently selected
surround mode.
surround mode.
¤
DISP:
This indicator lights when
the FL display has been turned
off using the
off using the
Display
button
) to
remind you that the unit is still
turned on.
turned on.
‹
Copy Indicators:
The
TAPE
COPY
indicator lights when an input
other than the current source has
been selected to copy Tape 1. The
been selected to copy Tape 1. The
VCR COPY1
indicator signifies that
the input to VCR 1 is other than the
currently selected source.
currently selected source.
›
P-Scan:
This indicator flashes
when the stations programmed into
the tuner memory are being auto-
matically reviewed.
the tuner memory are being auto-
matically reviewed.
fi
Auto Memo:
This indicator flash-
es when the tuner is automatically
scanning for stations and entering
them into the preset memory.
scanning for stations and entering
them into the preset memory.
fl
Signal Level Indication:
This is
a visual indication of the strength of
a radio station signal. The more bars
visible, the stronger the station.
a radio station signal. The more bars
visible, the stronger the station.
7
•AVR80mkII 120 (f).qx 2/5/99 9:56 AM Page 8
Rear Panel Audio and System Connections
8
OUT
TAPE2
IN
MULTI
OUT
LD
TV
OUT
TAPE1
IN
CD
OUT
VCR2
IN
FRONT
SWITCHED
AC OUTLETS (120V 60Hz)
CENTER
SURR.
8 OHMS
8 OHMS
FRONT
8 OHMS
R
L
MAIN IN
PRE OUT
SURR.
CENTER
SUB
WOOFER
LD
DIGITAL
IN
MULTI
OUT
IN
REMOTE
CONT.
6-CH
DIRECT
INPUT
OUT
VCR1
IN
L
FRONT
R
L
SURR.
R
CENTER
SUB
WOOFER
L
R
L
R
AUDIO
R
L
SPEAKERS
VIDEO
S-VIDEO
FM
(75
Ω
)
AM
ANTENNA
GND
TV
MONI
OUT
VCR2
IN
OUT
VCR1
IN
LD
TV
UNSWITCHED
®
†
ß
√ π
œ
∑
µ
ñ
˚
ü
ø
å
ç
∫
¬
∆
î
∂
ƒ
é
©
˙
å
FM Antenna
∫
AM Antenna
ç
Tape 1 Out
∂
Tape 1 In
é
Tape 2 Out
ƒ
Tape 2 In
©
CD IN
˙
Front Right Speaker Output
î
Front Left Speaker Output
∆
Center
˚
Surround Right Speaker Output
¬
Surround Left Speaker Output
µ
Subwoofer Pre-Out
ñ
Pre-Outs
ø
6 Channel Direct Input
π
Multi Room Interface
œ
Multi IR
®
Multi-Out
ß
Power Cable
†
Switched AC Outlet
ü
Unswitched AC Outlet
√
Remote IR In
∑
Remote IR Out
•AVR80mkII 120 (f).qx 2/5/99 9:56 AM Page 9
Rear Panel Audio and System Connections
å
FM Antenna:
Connect an indoor
or external FM antenna to these
terminals.
terminals.
∫
AM Antenna:
Connect the AM
loop antenna supplied with the
receiver to these terminals. If an
external AM antenna is used, make
connections to the
receiver to these terminals. If an
external AM antenna is used, make
connections to the
AM
and
GND
terminals in accordance with the
instructions supplied with the
antenna.
instructions supplied with the
antenna.
ç
Tape 1 Out:
Connect these jacks
to the RECORD/INPUT jacks of an
audio recorder.
audio recorder.
∂
Tape 1 In:
Connect these jacks to
the PLAY/OUT jacks of an audio
recorder.
recorder.
é
Tape 2 Out:
Connect these jacks
to the RECORD/INPUT jacks of a
second audio recorder.
second audio recorder.
ƒ
Tape 2 In:
Connect these jacks to
the PLAY/OUT jacks of a second
audio recorder.
audio recorder.
©
CD IN:
Connect these jacks to
the output of a compact disc player
or CD changer.
or CD changer.
˙
Front R:
Connect these terminals
to the front right speaker.
î
Front L:
Connect these terminals
to the front left speaker.
∆
Center:
Connect these terminals
to the center speaker.
˚
Surround R:
Connect these ter-
minals to the right surround speaker.
¬
Surround L:
Connect these ter-
minals to the left surround speaker.
µ
Subwoofer Pre-Out:
Connect
this jack to the line level input of a
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
ñ
Pre-Outs:
If external power
amplifiers are used for any channels,
remove the jumper pin and connect
the jack to the input of the amplifier.
remove the jumper pin and connect
the jack to the input of the amplifier.
ø
6 Channel Direct Input:
If an
external digital audio decoder is
used for 5.1 (Dolby Digital) audio,
connect the outputs of that decoder
to these terminals.
used for 5.1 (Dolby Digital) audio,
connect the outputs of that decoder
to these terminals.
π
Multi Room Interface:
For multi-
room installations where keypad
remotes are in use, connect the key-
pad interface to this jack.
remotes are in use, connect the key-
pad interface to this jack.
œ
Multi IR:
Connect the output of
an IR sensor in a remote room to this
jack to operate the AVR80
jack to operate the AVR80
II
’s multi-
room control system.
®
Multi-Out:
When using the
AVR80
II
for multi-room audio, con-
nect this jack to the input of the
audio amplifier powering the remote
room speakers.
audio amplifier powering the remote
room speakers.
ß
Power Cable:
Connect the AC
plug to a non-switched AC wall
output.
output.
†
Switched AC Outlet:
This outlet
may be used to power any device
that you wish to have on when the
unit is turned on.
that you wish to have on when the
unit is turned on.
ü
Unswitched AC Outlet:
This out-
let may be used to power any AC
device. The power will remain on at
this outlet regardless of whether the
AVR80
device. The power will remain on at
this outlet regardless of whether the
AVR80
II
is on or off.
NOTE:
The power consumption of
the device plugged into each of
these outlets should not exceed 120
watts.
these outlets should not exceed 120
watts.
√
Remote IR In:
If the AVR80
II
’s
front panel IR sensor is blocked due
to cabinet doors or other obstruc-
tions, an external IR sensor may be
used. Connect the output of the sen-
sor to this jack.
to cabinet doors or other obstruc-
tions, an external IR sensor may be
used. Connect the output of the sen-
sor to this jack.
∑
Remote IR Out:
This connection
permits the IR sensor in the receiver
to serve other remote controlled
devices. Connect this jack to the “IR
IN” jack on Harman Kardon or other
compatible equipment.
to serve other remote controlled
devices. Connect this jack to the “IR
IN” jack on Harman Kardon or other
compatible equipment.
9
•AVR80mkII 120 (f).qx 2/5/99 9:56 AM Page 10
Rear Panel Video Connections
10
OUT
TAPE2
IN
MULTI
OUT
LD
TV
OUT
TAPE1
IN
CD
OUT
VCR2
IN
FRONT
SWITCHED
AC OUTLETS (120V 60Hz)
CENTER
SURR.
8 OHMS
8 OHMS
FRONT
8 OHMS
R
L
MAIN IN
PRE OUT
SURR.
CENTER
SUB
WOOFER
LD
DIGITAL
IN
MULTI
OUT
IN
REMOTE
CONT.
6-CH
DIRECT
INPUT
OUT
VCR1
IN
R
FRONT
L
R
SURR.
L
CENTER
SUB
WOOFER
L
R
L
R
AUDIO
R
L
SPEAKERS
VIDEO
S-VIDEO
FM
(75
Ω
)
AM
ANTENNA
GND
TV
MONI
OUT
VCR2
IN
OUT
VCR1
IN
LD
TV
UNSWITCHED
S
U
T
K
I
L
J
E
D
F
C
R
Q
O
N
B
A
P
M
A
P
M
G
H
H
A
VCR 1 Audio In
B
VCR 1 Audio Out
C
VCR 1 Video In
D
VCR 1 Video Out
E
VCR 1 S Video Out
F
VCR 1 S Video In
G
VCR 2 Audio Out
H
VCR 2 Audio In
I
VCR 2 Video Out
J
VCR 2 Video In
K
VCR 2 S Video Out
L
VCR 2 S Video In
M
TV Audio In
N
TV Video In
O
TV S Video In
P
LD Audio In
Q
LD Video In
R
LD S Video In
S
LD Digital In
T
TV Monitor Video Out
U
TV Monitor S Video Out
•AVR80mkII 120 (f).qx 2/5/99 9:56 AM Page 11
Click on the first or last page to see other AVR 80MK II (serv.man4) service manuals if exist.