DOWNLOAD Sony KLV-22CX350 / KLV-32CX350 Service Manual ↓ Size: 7.01 MB | Pages: 109 in PDF or view online for FREE

 GB

KLV-22/26/32BX350_22/26/32CX350_40/46BX450_40CX450_32BX35A

4-411-978-13(1)

• Refer to the supplied stand leaflet for proper 

attachment for some TV models.

• For best picture quality, do not expose the screen to 

direct illumination or sunlight.

• Place the TV with its screen facing down on a level and 

stable surface covered with a thick and soft cloth.

• Hold the Table-Top Stand with one hand to avoid it 

dropping when attaching.

• If using an electric screwdriver, set the tightening 

torque at approximately 1.5 N·m (15 kgf·cm).

• Ensure the AC power cord is away from screw holes 

during stand installation to avoid damage to the AC 
power cord.

•

Connecting cables are not supplied.

Push to 
open

* Be careful not to hit the Table-Top Stand against 

the edge of the surface when attaching it.

Thick and soft 
cloth 

Antenna cable

Antenna cable

Antenna cable 

AV cable

VCR

010COV.book  Page 4  Friday, January 13, 2012  3:53 PM

 GB

KLV-22/26/32BX350_22/26/32CX350_40/46BX450_40CX450_32BX35A

4-411-978-13(1)

An optional Sony support belt kit is used to secure the 
TV. Contact your nearest Sony service centre to 
purchase a kit. Have your TV model name ready for 
reference.

Install a machine screw (not supplied) into 
the screw hole of the TV.

Install a wood screw (not supplied) in the TV 
stand.

• You can also tune channels manually (page 23).
• Language options vary depending on model.

Press "/1 on the TV to turn on the TV.

Press the number buttons or PROG +/– to 
select a TV channel.

Press 2 +/– to adjust the volume.

• Do not remove the stand for any reason other than to 

wall-mount the TV.

• Place the TV with its screen facing down on a level 

and stable surface covered with a thick and soft cloth.

• Hold the Table-Top Stand with one hand to avoid it 

dropping when detaching.

* The shapes of AC power plug and AC power outlet differ 

depending on the region.

**When the TV is in standby mode (the 1 (standby) 

indicator on the TV front panel is red), press "/1 on the 
remote to turn on the TV.

Follow the instructions on the screen.

“Location”: Select “Home” for the best 
TV settings to use the TV in the home.

"/1

“Programme Sorting”: If you want to 
change the order of channels, follow the 
steps in “Programme Sorting” (page 23).
Press HOME to exit.

Thick and soft 
cloth 

030STU.fm  Page 5  Tuesday, January 17, 2012  11:12 AM

 GB

KLV-22/26/32BX350_22/26/32CX350_40/46BX450_40CX450_32BX35A

4-411-978-13(1)

Batteries must not be exposed to excessive  
heat such as sunshine, fire or the like.

Install and use the TV set in accordance with 
the instructions below in order to avoid any 
risk of fire, electrical shock or damage and/or 
injuries.

• The TV set should be installed near an 

easily accessible AC power outlet.

• Place the TV set on a stable, level surface 

to avoid it from falling down and cause 
personal injury or damage to the TV.

• Only qualified service personnel should 

carry out wall installations.

• For safety reasons, it is strongly 

recommended that you use Sony 
accessories, including:
– KLV-46BX450/40BX450/40CX450/

32BX350/32BX35A/32CX350: 
Wall-mount bracket SU-WL50B

– KLV-26CX350/26BX350/22CX350/

22BX350: 
Wall-mount bracket SU-WL100

• Be sure to use the screws supplied with 

the Wall-mount bracket when attaching 
the mounting hooks to the TV set. The 
supplied screws are designed so that they 
are 8 mm to 12 mm in length when 
measured from the attaching surface of 
the mounting hook.
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model.
Use of screws other than those supplied 
may result in internal damage to the TV 
set or cause it to fall, etc.

• Before transporting the TV set, 

disconnect all cables.

• Two or more people are needed to 

transport a large TV set.

• When transporting the TV set by hand, 

hold it as shown below. Do not put stress 
on the LCD panel and the frame around 
the screen.

• When lifting or moving the TV set, hold it 

firmly from the bottom.

• When transporting the TV set, do not 

subject it to jolts or excessive vibration.

• When transporting the TV set for repairs 

or when moving, pack it using the original 
carton and packing material.

• Never cover the ventilation holes or insert 

anything in the cabinet.

• Leave space around the TV set as shown 

below.

• It is strongly recommended that you use a 

Sony wall-mount bracket in order to 
provide adequate air-circulation.

• To ensure proper ventilation and prevent 

the collection of dirt or dust:
– Do not lay the TV set flat, install 

upside down, backwards, or sideways.

– Do not place the TV set on a shelf, rug, 

bed or in a closet.

– Do not cover the TV set with a cloth, 

such as curtains, or items such as 
newspapers, etc.

– Do not install the TV set as shown 

below.

Handle the AC power cord and outlet as 
follows in order to avoid any risk of fire, 
electrical shock or damage and/or injuries:
– The shape of AC power plug, which is 

supplied with the TV set, varies 
depending on the regions.

– Use only Sony supplied AC power cords, 

not those of other brands.

– Insert the plug fully into the AC power 

outlet.

– Operate the TV set on a 110-240 V AC 

supply only.

– When wiring cables, be sure to unplug the 

AC power cord for your safety and take 
care not to catch your feet on the cables.

– Disconnect the AC power cord from the 

AC power outlet before working on or 
moving the TV set.

– Keep the AC power cord away from heat 

sources.

– Unplug the AC power plug and clean it 

regularly. If the plug is covered with dust 
and it picks up moisture, its insulation may 
deteriorate, which could result in a fire. 

• Do not use the supplied AC power cord on 

any other equipment.

• Do not pinch, bend, or twist the AC power 

cord excessively. The core conductors 
may be exposed or broken.

• Do not modify the AC power cord.
• Do not put anything heavy on the AC 

power cord.

• Do not pull on the AC power cord itself 

when disconnecting the AC power cord.

• Do not connect too many appliances to 

the same AC power outlet.

• Do not use a poor fitting AC power outlet.

Do not install/use the TV set in locations, 
environments or situations such as those 
listed below, or the TV set may malfunction 
and cause a fire, electrical shock, damage 
and/or injuries.

• Outdoors (in direct sunlight), at the 

seashore, on a ship or other vessel, inside 
a vehicle, in medical institutions, unstable 
locations, near water, rain, moisture or 
smoke.

• If the TV is placed in the changing room 

of a public bath or hot spring, the TV may 
be damaged by airborne sulfur, etc.

Screw (supplied with the 
Wall-mount bracket)

Mounting Hook
Hook attachment on rear of 
TV set

8 mm - 12 mm

KLV-26/22CX350/
KLV-26/22BX350

KLV-46/40BX450/
KLV-40CX450/
KLV-32BX350/
KLV-32CX350/
KLV-32BX35A

Be sure to hold the bottom of the panel, 
not the front part.

30 cm

10 cm

10 cm

10 cm

Leave at least this space around 
the set.

30 cm

10 cm

10 cm

6 cm

Leave at least this space around the 
set.

Air circulation is blocked.

Wall

Wall

010COV.book  Page 6  Friday, January 13, 2012  3:53 PM

 GB

KLV-22/26/32BX350_22/26/32CX350_40/46BX450_40CX450_32BX35A

4-411-978-13(1)

• Never spray water or detergent directly on 

the TV set. It may drip to the bottom of the 
screen or exterior parts and enter the TV 
set, and may cause damage to the TV set. 

• Places that are hot, humid, or excessively 

dusty; where insects may enter; where it 
might be exposed to mechanical 
vibration, near flammable objects 
(candles, etc). The TV set shall not be 
exposed to dripping or splashing and no 
objects filled with liquids, such as vases, 
shall be placed on the TV.

• Do not place the TV in a humid or dusty 

space, or in a room with oily smoke or 
steam (near cooking tables or 
humidifiers). Fire, electric shock, or 
warping may result.

• Do not install the TV in places subject to 

extreme temperature such as in direct 
sunlight, near a radiator or a heating vent. 
The TV may overheat in such condition 
which can cause deformation of the 
enclosure and/or TV malfunction.

• Do not use when your hands are wet, with 

the cabinet removed, or with attachments 
not recommended by the manufacturer. 
Disconnect the TV set from AC power 
outlet and antenna during lightning 
storms.

• Do not install the TV so that it sticks out 

into an open space. Injury or damage from 
a person or object bumping into the TV 
may result.

• Do not throw anything at the TV set. The 

screen glass may break by the impact and 
cause serious injury.

• If the surface of the TV set cracks, do not 

touch it until you have unplugged the AC 
power cord. Otherwise electric shock may 
result. 

• If you will not be using the TV set for 

several days, the TV set should be 
disconnected from the AC power for 
environmental and safety reasons. 

• As the TV set is not disconnected from the 

AC power when the TV set is just turned 
off, pull the plug from the AC power outlet 
to disconnect the TV set completely.

• However, some TV sets may have 

features that require the TV set to be left 
in standby to work correctly.

• Do not allow children to climb on the TV 

set.

• Keep small accessories out of the reach of 

children, so that they are not mistakenly 
swallowed.

 the TV set and unplug the AC 

power cord immediately if any of the 
following problems occur.
Ask your dealer or Sony service centre to 
have it checked by qualified service 
personnel.

– AC power cord is damaged.
– Poor fitting of AC power outlet.
– TV set is damaged by being dropped, hit 

or having something thrown at it.

– Any liquid or solid object falls through 

openings in the cabinet.

When the LCD Monitor is used for an 
extended period, the panel surrounds become 
warm. You may feel hot when touching there 
by the hand.

• View the TV in moderate light, as 

viewing the TV in poor light or during 
long period of time, strains your eyes.

• When using headphones, adjust the 

volume so as to avoid excessive levels, as 
hearing damage may result.

• Although the LCD screen is made with 

high-precision technology and 99.99% or 
more of the pixels are effective, black dots 
may appear or bright points of light (red, 
blue, or green) may appear constantly on 
the LCD screen. This is a structural 
property of the LCD screen and is not a 
malfunction.

• Do not push or scratch the front filter, or 

place objects on top of this TV set. The 
image may be uneven or the LCD screen 
may be damaged.

• If this TV set is used in a cold place, a 

smear may occur in the picture or the 
picture may become dark. This does not 
indicate a failure. These phenomena 
disappear as the temperature rises.

• Ghosting may occur when still pictures 

are displayed continuously. It may 
disappear after a few moments.

• The screen and cabinet get warm when 

this TV set is in use. This is not a 
malfunction.

• The LCD screen contains a small amount 

of liquid crystal. Some fluorescent tubes 
used in this TV set also contain mercury. 
Follow your local ordinances and 
regulations for disposal.

Be sure to unplug the AC power cord 
connected to the TV set from AC power 
outlet before cleaning.
To avoid material degradation or screen 
coating degradation, observe the following 
precautions.
• To remove dust from the screen surface/

cabinet, wipe gently with a soft cloth. If 
dust is persistent, wipe with a soft cloth 
slightly moistened with a diluted mild 
detergent solution.

• Never spray water or detergent directly on 

the TV set. It may drip to the bottom of the 
screen or exterior parts and enter the TV 
set, and may cause damage to the TV set.

• Never use any type of abrasive pad, 

alkaline/acid cleaner, scouring powder, or 
volatile solvent, such as alcohol, benzene, 
thinner or insecticide. Using such 
materials or maintaining prolonged 
contact with rubber or vinyl materials 
may result in damage to the screen surface 
and cabinet material.

• Periodic vacuuming of the ventilation 

openings is recommended to ensure to 
proper ventilation.

• When adjusting the angle of the TV set, 

move it slowly so as to prevent the TV set 
from moving or slipping off from its table 
stand.

Keep optional components or any equipment 
emitting electromagnetic radiation away 
from the TV set. Otherwise picture distortion 
and/or noisy sound may occur.

• Observe the correct polarity when 

inserting batteries.

• Do not use different types of batteries 

together or mix old and new batteries.

• Dispose of batteries in an 

environmentally friendly way. Certain 
regions may regulate the disposal of 
batteries. Please consult your local 
authority.

• Handle the remote with care. Do not drop 

or step on it, or spill liquid of any kind 
onto it.

• Do not place the remote in a location near 

a heat source, a place subject to direct 
sunlight, or a damp room.

010COV.book  Page 7  Friday, January 13, 2012  3:53 PM