Sony KDL-32SL130 / KDL-40SL130 Service Manual ▷ View online
37
KDL-32SL130/40SL130
KDL-32SL130/40SL130
×
OVERALL VIEW
KDL-40SL130 ONLY
38
KDL-32SL130/40SL130
KDL-32SL130/40SL130
KDL-40SL130 ONLY
1. Apply Sheet Core C to edge of Panel to
cover sharp edge of panel.
Use ribs on bezel (w/o screw boss) as a
guide to center tape.
2. Dress split (H3 & H4) in harness under
Cushion D Tape.
3. Route H3 and H4 harness as shown.
OPERATION PROCESS
Use rib on bezel as reference
to center Sheet Core C when applying
to panel edge.
to center Sheet Core C when applying
to panel edge.
Use UL Tapes as Reference to
position Harness over panel,
position Harness over panel,
1
2
3
Use H3/H4 Harness "Split" as reference
for top of Cushion D Position
(under Cushion D)
for top of Cushion D Position
(under Cushion D)
Use panel edge to align Himelon Tape.
H4-Bd Cable
H3 BOARD HARNESS
39
KDL-32SL130/40SL130
KDL-32SL130/40SL130
KDL-40SL130 ONLY
1. H4-Bd should be installed BEFORE the
speaker/baffles are installed
2. Be careful to align Plastic clip at left side
of bezel with notch in PWB.
3. PRESS FIRMLY on PWB next to clip to seat
H4-Bd. DO NOT USE Excessive force. PWB
or clip WILL BREAK!
Tape H4 wires to Bottom of panel edge.
OPERATION PROCESS
1
2
3
H4 BOARD
40
KDL-32SL130/40SL130
KDL-32SL130/40SL130
KDL-40SL130 ONLY
Wire Dress Right Speaker wires and H4
cables in side clamp (white) and G3-Bd
bracket clips (black).
NOTE: ALL Wires are dressed
in far left G-Bracket clip!
OPERATION PROCESS
NOTE: H4-Bd/Rt. Speaker cables
are dressed in plastic clip.
Clip installed by Vendor.
are dressed in plastic clip.
Clip installed by Vendor.
2
1
NOTE: Keep H4 cables AWAY From
INVERTER BOARD AREA!
INVERTER BOARD AREA!
H4 BOARD AND RIGHT SPEAKER
Click on the first or last page to see other KDL-32SL130 / KDL-40SL130 service manuals if exist.