Sony VPL-VW85 Service Manual ▷ View online
1-11 (E)
VPL-VW85
1-3-13. Lamp Power Supply
4 Four screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
7 G Holder
6 Two dowels
5 harnesses
3 Remove the harness in the
direction of the arrow A.
direction of the arrow A.
Protrusion
Protrusion
2 Open the flat clamp and remove
the harnesses in the direction of the arrow B.
the harnesses in the direction of the arrow B.
A
B
8 Two screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
![ Lamp power supply
0 Two dowels
Lamp power connector assembly
9 Remove the lamp power connector
assembly in the direction of the arrow C.
assembly in the direction of the arrow C.
!= Heat sink (BA), Sheet (BA)
!- Two clips (BA)
X3
X3
X2
X1
1 Remove the hood assembly.
(Refer to section 1-3-2, step 1.)
(Refer to section 1-3-2, step 1.)
C
1-12 (E)
VPL-VW85
1-3-14. V Board, TA Board and D.C. Motor
8 Two screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
0 Two sirocco cushions
![ Six fan dampers
!- Fan cover
(84C)
(84C)
!= Fan cover
(84I)
(84I)
9 Four claws
!] D.C. motor
2 Three screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
3 D.C. motor block
6 Screw
(+BVTP 3 x 12)
(+BVTP 3 x 12)
7 TA board
4 Screw
(+BVTP 3 x 12)
(+BVTP 3 x 12)
5 V board
CN30
CN35
1 Fan connector
1-13 (E)
VPL-VW85
1-3-15. D.C. Fan (EX)
2 Four screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
5 D.C. fan (EX) block
3 Raise the food block in
the direction of the arrow.
the direction of the arrow.
1 Fan connector
4 Dowel
0 Eight fan dampers
9 Top duct (EX),
Bottom duct (EX)
Bottom duct (EX)
8 Fan duct
(EX)
(EX)
!- D.C. fan (EX)
7 Two claws
6 Two screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
1-14 (E)
VPL-VW85
1-3-16. QB Board
3 Two screws
(+BVTP 3 x 12)
(+BVTP 3 x 12)
5 Louver (L)
2 Adjuster boss
1 Two protrusions
4 Lamp fan duct
(ATT)
(ATT)
6 Screw
(+BVTP 3 x 12)
(+BVTP 3 x 12)
8 QB board
CN11
Front Side
of Unit
of Unit
7 Two hexagon screws
(There is a height difference. )
(There is a height difference. )
QB board
Click on the first or last page to see other VPL-VW85 service manuals if exist.