Sony DPP-FP70 Service Manual ▷ View online
4-9E
DPP-FP70
4-3-6. MECHANICAL OPERATION CHECK
The mechanical check is performed in the service mode.
Procedure:
1.
Start the service mode. (Refer to Section 4-1-1.)
2.
Select “Mechanical Test” using the arrow buttons
(f,F) and press the [ENTER] button. The following menu
screen is displayed.
(f,F) and press the [ENTER] button. The following menu
screen is displayed.
3.
Press the [CANCEL] button on this Menu screen to return to
the startup screen of the service mode while any test mode is
running, except when the head motor aging or the paper feed
motor aging is running.
the startup screen of the service mode while any test mode is
running, except when the head motor aging or the paper feed
motor aging is running.
4.
When the mechanical operation check is complete, quit the
service mode. (Refer to Section 4-1-1.)
service mode. (Refer to Section 4-1-1.)
Description of operation:
Each operation of this unit is performed when the button on the
operation panel is pressed.
operation panel is pressed.
Note
: Do not press the button that is not described below.
• [ENTER] button:
The head position returns to the initial state when this button is
pressed.
pressed.
• f button:
The head position moves upward when this button is pressed.
• F button:
The head position moves downward when this button is pressed.
• [MENU] button:
The head motor aging starts when this button is pressed. When
the [CANCEL] button is pressed during aging, the operation is
discontinued.
the [CANCEL] button is pressed during aging, the operation is
discontinued.
• [PRINT] button:
The electric current of head motor is switched when this button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
t Electric current M t Electric current L
(repeated)
• G button:
The paper feed motor moves in the paper feed direction when
this button is pressed.The speed changes every time this button is
pressed.
(Low speed L
this button is pressed.The speed changes every time this button is
pressed.
(Low speed L
t Middle speed M t High speed H t Stop
Stp)
• g button:
The paper feed motor moves in the paper eject direction when
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
this button is pressed. The speed changes every time this button
is pressed.
(Low speed L
t Middle speed M t High speed H t Stop
Stp)
•
(Enlarge) button:
The paper feed motor aging starts when this button is pressed.
When the [CANCEL] button is pressed during aging, the operation
is discontinued.
When the [CANCEL] button is pressed during aging, the operation
is discontinued.
•
(Reduce) button:
The electric current of paper feed motor is switched when button
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
is pressed. The electric current is switched as follows every time
the button is pressed.
Electric current H
t Electric current M2 t Electric current
M1
t Electric current L (repeated)
To quit each operation, press the [CANCEL] button.
The screen returns to the menu screen.
Revision History
985218515.pdf
DPP-FP70
Ver.
1.0
1.1
1.2
1.3
1.4
Date
2007.02
2007.05
2007.05
2007.08
2007.10
History
Official Release
Revised-1
Revised-2
Revised-3
Supplement-1
(S1 DI07-178)
Contents
—
•
Change of the order of publishing item
•
Correction of Exploded views
•
Addition of part name of paper tray
•
Change of the title name from Service Note
to Adjustment and Check
•
Change of title name in Adjustment and
Check
•
Change of Note for
SPECIFICATIONS
•
Addition of Ref. No. 74 for EXPLODED
VIEWS
S.M. Revised:
S.M. Revised:
Page 2-3
•
Change of EXPLODED VIEWS
•
Change of ACCESSORIES
S.M. Changed:
Page 2-4E
S.M. Rev.
issued
—
Yes
Yes
Yes
Yes
Reverse
Revision History
985218515.pdf
DPP-FP70
Ver.
1.0
1.1
1.2
1.3
1.4
Date
2007.02
2007.05
2007.05
2007.08
2007.10
History
Official Release
Revised-1
Revised-2
Revised-3
Supplement-1
(S1 DI07-178)
Contents
—
•
Change of the order of publishing item
•
Correction of Exploded views
•
Addition of part name of paper tray
•
Change of the title name from Service Note
to Adjustment and Check
•
Change of title name in Adjustment and
Check
•
Change of Note for
SPECIFICATIONS
•
Addition of Ref. No. 74 for EXPLODED
VIEWS
S.M. Revised:
S.M. Revised:
Page 2-3
•
Change of EXPLODED VIEWS
•
Change of ACCESSORIES
S.M. Changed:
Page 2-4E
S.M. Rev.
issued
—
Yes
Yes
Yes
Yes
Reverse
Revision History
985218515.pdf
DPP-FP70
Ver.
1.0
1.1
1.2
1.3
1.4
Date
2007.02
2007.05
2007.05
2007.08
2007.10
History
Official Release
Revised-1
Revised-2
Revised-3
Supplement-1
(S1 DI07-178)
Contents
—
•
Change of the order of publishing item
•
Correction of Exploded views
•
Addition of part name of paper tray
•
Change of the title name from Service Note
to Adjustment and Check
•
Change of title name in Adjustment and
Check
•
Change of Note for
SPECIFICATIONS
•
Addition of Ref. No. 74 for EXPLODED
VIEWS
S.M. Revised:
S.M. Revised:
Page 2-3
•
Change of EXPLODED VIEWS
•
Change of ACCESSORIES
S.M. Changed:
Page 2-4E
S.M. Rev.
issued
—
Yes
Yes
Yes
Yes
Reverse