View Sony DPP-FP70 Service Manual online
SERVICE MANUAL 9-852-185-13
with this Manual.
Instructions of DPP-FP70/FP90 (3-097-069-12 (1)).
Cyan 3 pass)
101.6 x 152.4 mm (maximum, borderless)
SD Card insertion slot
CompactFlash card insertion slot
(Excluding Index Print and part of
designed for the printer.
6.2 cm (2.5 type) TFT drive
Total number of dots:
115 200 (480 x 240)
On standby mode: less than 1W
installed: Approx. 169 mm ( 6
(excluding the paper tray, inkribbon,
AC power adaptor)
• Cleaning cartridge/Cleaning sheet
• AC adaptor
• AC power cord
• Operating Instructions
• Read This First
• Warranty (In some regions, the warranty is
• CD-ROM (Sony DPP-FP70/FP90 Printer
change without notice.
paper that the printer can print is estimated
to be approximately 2,000. For the total
number of sheets, please check “Printer
Information Display” of the “Display/
Printer setup” menu.
containing effective picture elements of
approximately 10,100,000 or equivalent.
finished. (The printing time may vary
depending on a used equipment, a format
of an image, a used memory card, settings
of an application and operating conditions.)
button on the OSD of the camera is pressed
to when the printing is finished.
connections. Check the entire board surface for solder splashes
"pinched" or contact high-wattage resistors.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
• Unleaded solder melts at a temperature about 40
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
heated tip is applied for too long, so be careful!
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
also be added to ordinary solder.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.