Sony HDR-UX3E / HDR-UX5 / HDR-UX5E / HDR-UX7 / HDR-UX7E (serv.man3) Service Manual ▷ View online
6-46
HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ
Fig. 6-2-13
2-5.
SERVO ADJUSTMENT
2-5-1.
Menu in SERVO Adjustment Section
START button:
All items of adjustment buttons are ex-
ecuted in the descending order.
ecuted in the descending order.
Adjustment button:
Only the adjustment item assigned to the
button name is executed.
button name is executed.
Status lamp:
Adjustment status is displayed with color.
White
White
Not adjusted
Red blinking
Adjustment in progress
Green
Adjustment OK
Red
Adjustment NG
START button
Status lamp
Adjustment buttons
6-47
HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ
Order
Adjustment item
Message
Disc
Operation
1
No Disc
Click the
[START]
button of “SERVO
Adjustment”.
2
Servo Param
Initialize
Set the DVD-RW Reference + DOW Disc, and
with the disc cover left open, click the
with the disc cover left open, click the
[OK]
button in the message window.
3
-RW Ref
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
4
-RW Self
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
5
-R Self
DVD-R Disc
for Self Jitter
for Self Jitter
Remove the DVD-RW Reference + DOW
Disc, and set the DVD-R Disc for Self Jitter,
and then close the disc cover and click the
Disc, and set the DVD-R Disc for Self Jitter,
and then close the disc cover and click the
[OK]
button in the message window.
6
+RDL Self
Remove the DVD-R Disc for Self Jitter, and
set the DVD+RDL Self Disc, and then close
the disc cover and click the
set the DVD+RDL Self Disc, and then close
the disc cover and click the
[OK]
button in the
message window.
7
Data Dump
(If the adjustment result of previous item is
OK, this item is executed successively.)
OK, this item is executed successively.)
8
No Disc
Remove the DVD+RDL Self Disc.
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
(On the AUDIT screen, if the status lamps of
respective adjustment buttons are all lit in
green, the adjustment is over.)
Note:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
DVD-RW
Reference + DOW
Disc
Reference + DOW
Disc
DVD+RDL
Self Disc
Self Disc
2-5-2.
Adjusting Method
6-48
HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ
2-6.
TROUBLESHOOTING
2-6-1.
Fundamental Troubleshooting Flow
Yes
No
No
Yes
End
OK?
Execute <ADJUST>
Faulty part isolation processing
OK?
Execute <DIAGNOSIS>
Initial inspection
MD Board recovery processing
Yes
No
OK?
Execute <ADJUST>
(MD Block is faulty)
Return to initial inspection
Replace MD Block
Faulty part isolation processing
6-49
HDR-UX3E/UX5/UX5E/UX7/UX7E_ADJ
Priority varies depending on the isolated item
Execute <ADJUST>
Restore original MD Block
Replace Driver IC
Replace DSP IC
Yes
No
End
OK?
Yes
No
OK?
Execute <ADJUST>
Replace RF IC
Replace MD Block
MD Board recovery processing
Click on the first or last page to see other HDR-UX3E / HDR-UX5 / HDR-UX5E / HDR-UX7 / HDR-UX7E (serv.man3) service manuals if exist.