Sony HDR-SR1 / HDR-SR1E (serv.man4) Service Manual ▷ View online
6-27
HDR-SR1/SR1E_ADJ
1-7.
LCD/EVF SYSTEM ADJUSTMENTS
1.
Function of Each Button on LCD/EVF System Ad-
justment Screen
justment Screen
Click the [LCD/EVF SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “LCD/EVF SYSTEM ADJUSTMENT”
screen in Fig. 6-1-20 will appear.
Menu screen, and the “LCD/EVF SYSTEM ADJUSTMENT”
screen in Fig. 6-1-20 will appear.
Fig. 6-1-20
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Start] button
Each adjustment “LCD/EVF adjustment” or “Touch Panel
Adjustment” starts.
Each adjustment “LCD/EVF adjustment” or “Touch Panel
Adjustment” starts.
3
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD/EVF ad-
justment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the LCD/EVF ad-
justment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
2.
Adjustment Items of LCD/EVF System Adjustment
The adjustment items of LCD/EVF system adjustment are as listed
in Table 6-1-4. The Automatic Adjustment Program executes the
adjustment items if the LCD/EVF Adjustment Start button is
clicked.
in Table 6-1-4. The Automatic Adjustment Program executes the
adjustment items if the LCD/EVF Adjustment Start button is
clicked.
3
2
1
Note:
The adjustment data cannot be read or written from the SeusEX.
Block
Page
Address
VCO Adj. (LCD)
10
60
1050, 1051
Contrast Adj. (LCD)
10
60
1058
VCO Adj. (EVF)
10
60
103F, 1040
Contrast Adj. (EVF)
10
60
1047
White Balance Adj. (EVF)
10
60
1045, 1046
V-COM Adj. (LCD)
10
60
1052
Transmissive Mode White Balance Adj. (LCD)
10
60
1056, 1057
Reflective Mode White Balance Adj. (LCD)
10
60
107B, 107C
Sample Hold Phase Adj. (LCD)
10
60
105F
Touch Panel
Adjustment
Adjustment
Touch Panel Adj.
Adjusting Address
LCD/EVF
Adjustment
Adjustment
(Note)
Button Name
Adjustment
Table 6-1-4
6-28
HDR-SR1/SR1E_ADJ
4) If the [End] button is clicked, the following screen is displayed
during the execution of “4. V-COM Adj. (LCD)”. Using the
[Up]/[Down] button on the screen, adjust so that the brightness
of portions A and B on the LCD panel is equal. After the ad-
justment, click the [End] button in the screen.
[Up]/[Down] button on the screen, adjust so that the brightness
of portions A and B on the LCD panel is equal. After the ad-
justment, click the [End] button in the screen.
5) If the [End] button is clicked, the following screen is displayed
during the execution of “5. Transmissive Mode White Balance
Adj. (LCD)”. Check that the LCD screen is not colored. If
colored, using the [Up]/[Down] button on the screen, adjust so
that the LCD screen is not colored. After the adjustment, click
the [End] button in the screen.
Adj. (LCD)”. Check that the LCD screen is not colored. If
colored, using the [Up]/[Down] button on the screen, adjust so
that the LCD screen is not colored. After the adjustment, click
the [End] button in the screen.
3.
LCD Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD/EVF Adj.
2. LCD/EVF Automatic Adj.
sequence]
1. Data Setting during LCD/EVF Adj.
2. LCD/EVF Automatic Adj.
(VCO Adj. (LCD/EVF), Contrast Adj. (LCD/EVF))
3. White Balance Adj. (EVF)
4. V-COM Adj. (LCD)
5. Transmissive Mode White Balance Adj. (LCD)
6. Reflective Mode White Balance Adj. (LCD)
7. Sample Hold Phase Adj. (LCD)
8. Release of Data Setting during LCD/EVF Adj.
4. V-COM Adj. (LCD)
5. Transmissive Mode White Balance Adj. (LCD)
6. Reflective Mode White Balance Adj. (LCD)
7. Sample Hold Phase Adj. (LCD)
8. Release of Data Setting during LCD/EVF Adj.
[Adjusting method]
1) Click the [Start] button of the LCD/EVF Adjustment.
2) The Automatic Adjustment Program executes the “1. Data Set-
1) Click the [Start] button of the LCD/EVF Adjustment.
2) The Automatic Adjustment Program executes the “1. Data Set-
ting during LCD/EVF Adj.” and “2. LCD/EVF Automatic
Adj.”.
Adj.”.
3) If “2. LCD/EVF Automatic Adj.” completed successfully, the
following screen is displayed during the execution of “3. White
Balance Adj. (EVF)”. Check that the EVF screen is not col-
ored. If colored, using the [Up]/[Down] button on the screen,
adjust so that the EVF screen is not colored. After the adjust-
ment, click the [End] button in the screen.
Balance Adj. (EVF)”. Check that the EVF screen is not col-
ored. If colored, using the [Up]/[Down] button on the screen,
adjust so that the EVF screen is not colored. After the adjust-
ment, click the [End] button in the screen.
6-29
HDR-SR1/SR1E_ADJ
6) If the [End] button is clicked, “6. Reflective Mode White Bal-
ance Adj. (LCD)” and “7. Sample Hold Phase Adj. (LCD)”
will be executed. The following screen is displayed during the
execution of “7. Sample Hold Phase Adj. (LCD)”. Using the
[Up]/[Down] button on the screen, adjust so that the LCD screen
is Brightest. After the adjustment, click the [End] button in the
screen.
will be executed. The following screen is displayed during the
execution of “7. Sample Hold Phase Adj. (LCD)”. Using the
[Up]/[Down] button on the screen, adjust so that the LCD screen
is Brightest. After the adjustment, click the [End] button in the
screen.
7) If the [End] button is clicked, the following message is dis-
played. Check the LCD screen in accordance with message.
After the checking, click the [OK] button.
After the checking, click the [OK] button.
8) If the [OK] button is clicked, “8. Release of Data Setting dur-
ing LCD/EVF Adj.” will be executed.
9) Upon successful completion of all item the LCD/EVF Adjust-
ment, the following message is displayed. Click the [OK] but-
ton.
ton.
4.
Touch Panel Adjustment
[Automatic Adjustment Program execution items and
sequence]
1. Touch Panel Adj.
2. Release of Data Setting during LCD/EVF Adj.
sequence]
1. Touch Panel Adj.
2. Release of Data Setting during LCD/EVF Adj.
[Adjusting method]
1) Click the [Start] button of the Touch Panel Adjustment.
2) The Automatic Adjustment Program executes the “1. Touch
1) Click the [Start] button of the Touch Panel Adjustment.
2) The Automatic Adjustment Program executes the “1. Touch
Panel Adj.”. The following message is displayed, and then
adjust the LCD screen in accordance with the instructions given
on the screen. After the adjustment, click the [OK] button in
the message window.
adjust the LCD screen in accordance with the instructions given
on the screen. After the adjustment, click the [OK] button in
the message window.
3) If the [OK] button is clicked, “2. Release of Data Setting dur-
ing LCD/EVF Adj.” will be executed.
4) Upon successful completion of all item the Touch Panel Ad-
justment, the following message is displayed. Click the [OK]
button.
button.
6-30
HDR-SR1/SR1E_ADJ
4
3
2
1
1-8.
AUDIO SYSTEM ADJUSTMENTS
1.
Function of Each Button on Audio System Adjust-
ment Screen
ment Screen
Click the [AUDIO SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “AUDIO SYSTEM ADJUSTMENT” screen in Fig.
6-1-21 will appear.
screen, and the “AUDIO SYSTEM ADJUSTMENT” screen in Fig.
6-1-21 will appear.
Fig. 6-1-21
1
[To Menu] button
The Main Menu screen comes back.
The Main Menu screen comes back.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
“Audio Adjustment” starts.
“Audio Adjustment” starts.
4
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”.
When the data setting is cancelled, the button color returns to
“white”. (Use this button when an error occurred in the audio
adjustment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”.
When the data setting is cancelled, the button color returns to
“white”. (Use this button when an error occurred in the audio
adjustment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)
2.
Adjustment Items of AUDIO System Adjustment
The adjustment items of audio system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items when the AUDIO Adjustment Start button is clicked.
Table 6-1-5. The Automatic Adjustment Program executes the ad-
justment items when the AUDIO Adjustment Start button is clicked.
Table 6-1-5
Block
Page
Address
AUDIO
Adjustment
Adjustment
Internal 4ch Microphone Sensitivity Adj.
10
60
0104 to 013F
Adjusting Address
Button Name
Adjustment
Click on the first or last page to see other HDR-SR1 / HDR-SR1E (serv.man4) service manuals if exist.