DOWNLOAD Sony HDR-SR1 / HDR-SR1E (serv.man4) Service Manual ↓ Size: 1.11 MB | Pages: 85 in PDF or view online for FREE

6-15

HDR-SR1/SR1E_ADJ

8) After that, the following screen is displayed during the execu-

tion of “7. COMPONENT OUT Pr Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pr signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pr signals satisfies the specified value,
and click the [End] button in the screen.

9) If the [End] button is clicked, “8. Release of Data Setting dur-

ing Video Adj.” will be executed.

10) Upon successful completion of all item the VIDEO Adjust-

ment, the following message is displayed. Click the [OK] but-
ton.

6) After that, the following screen is displayed during the execu-

tion of “5. COMPONENT OUT Y Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Y signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Y signals satisfies the specified value, and
click the [End] button in the screen.

7) After that, the following screen is displayed during the execu-

tion of “6. COMPONENT OUT Pb Level Adj.”. Using the [Up]/
[Down] button on the screen, adjust so that the Pb signal level
satisfies the specified value. After the adjustment, check that
the sync level of the Pb signals satisfies the specified value,
and click the [End] button in the screen.

6-16

HDR-SR1/SR1E_ADJ

Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-13 will appear.

1

[To Menu] button
The Main Menu screen comes back.

2

[Preparation] button
Notes for adjustment or jigs used are displayed.

3

[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 7” starts.

4

Model Select radio button
Selects the model to be adjusted.

NTSC model: HDR-SR1
PAL model: HDR-SR1E

5

[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)

6

[Initialization of EEPROM Data] button
The “INITIALIZATION OF EEPROM DATA” screen appears.

5

4

3

3

2

1

6

2

3

6-17

HDR-SR1/SR1E_ADJ

The adjustment items of camera system adjustment are as listed in
Table 6-1-3. The Automatic Adjustment Program divides the ad-
justment items into seven, camera adjustment 1-7. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.

Initialization of
EEPROM Data

Initialization of EEPROM data

Not required

11

80

0F00 to 0FFF,
6300 to 6FFF

HALL Adj.

11

80

69D0 to 69D8

MR Adj.

11

80

6F30,
6F40 to 6F4B

Differential Gain Adj.

Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)

11

80

6E00 to 6EB3

Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away

CAMERA
Adjustment 3

Flange Back Check

Siemens star chart

-

-

-

F No. & ND Light Quality Standard
Data Input

11

80

69E0 to 69EF

Mechanical Shutter Adj.

11

80

69A0 to 69B5

Linear Matrix Adj.

11

80

6FC8 to 6FEB

AWB Standard Data Input

11

80

6F88 to 6F97,
6FF0 to 6FF7

LV Standard Data Input

11

80

69DC, 69DD

AWB Adj.

Clear chart (All White frame)
Filter C14 for color temperature
correction

11

80

6F84 to 6F87,
6F98 to 6FA7,
6FF8 to 6FFF

Color Reproduction Adj.

11

80

6FA8 to 6FB7

Color Reproduction Check
(Indoor HD)

-

-

-

Color Reproduction Check
(Indoor SD)

-

-

-

Color Reproduction Check
(Outdoor HD)

-

-

-

Color Reproduction Check
(Outdoor SD)

-

-

-

AWB Check

Clear chart (All White frame)
ND filter 1.0, 0.4 and 0.1

-

-

-

MAX GAIN Adj.

Clear chart (Center frame)

11

80

69DE

HS White Defect Adj.

-

-

-

White Defect Adj.

-

-

-

White Defect Adj. (FD white point)

-

-

-

White Defect Check

-

-

-

Black Defect Adj.

Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)

-

-

-

Strobe Light Level Adj.

11

80

69B8 to 69BD

Strobe White Balance Adj.

11

80

6F80, 6F81

CAMERA
Adjustment 7

Steady Shot Check

Not required

-

-

-

Color bar chart
(Color reproduction adjustment frame)
Filter C14 for color temperature
correction

Color bar chart
(Color reproduction adjustment frame)

CAMERA
Adjustment 4

Not required

Clear chart (All White frame)

11

6F20 to 6F3F

Not required

CAMERA
Adjustment 6

Flash adjustment box

CAMERA
Adjustment 1

Not required

 Dark Siemens star chart.

CAMERA
Adjustment 2

Flange Back Adj.

80

CAMERA
Adjustment 5

The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.

6-18

HDR-SR1/SR1E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. MR Adj.
4. Differential Gain Adj.
5. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. HALL Adj.” to “3. MR Adj.” will
be executed.

4) Upon successful completion of the “3. MR Adj.”, the follow-

ing message is displayed. Set the subject in accordance with
the message.

5) Click the [OK] button, and the “4. Differential Gain Adj.” will

be executed.

6) Upon completion of “4. Differential Gain Adj.”, “5. Release

of Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 1, the following message is displayed. Click the [OK]
button.

The EEPROM data of the board for service has already been ini-
tialized, not requiring further initialization when the board is re-
placed.
Execute this processing only when the EEPROM is replaced.
If the EEPROM data is initialized, all the camera adjustment data
is also initialized. All items of the camera adjustments must be
performed after the initialization of EEPROM data.

[Initializing method]
1) Click the [Initialization of EEPROM Data] button on Camera

Adjustment screen, and the following screen will appear.

2) Select the model name with the Model Name List.

3) Click the [Data Write] button.

4) The writing finishes when the following message is displayed.