Sony DCR-VX2200E (serv.man2) Service Manual ▷ View online
6-20
DCR-VX2200E_ADJ
20. BF Page table
Note 1:
Note 1:
If reading/writing data on pages BF, set data: 0B to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages BF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to 44
Fixed data-1 (Initialized data)
45
Fixed data-2
46 to 63
Fixed data-1 (Initialized data)
64 to 6A
Fixed data-2
6B to BC
Fixed data-1 (Initialized data)
BD
Fixed data-2
BE to FF
Fixed data-1 (Initialized data)
21. C2 Page table
Note 1:
Note 1:
If reading/writing data on pages C2, set data: 0C to page:
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 2. By this data set-
ting, the pages C2 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
22. C3 Page table
Note 1:
Note 1:
If reading/writing data on pages C3, set data: 0C to page:
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 3. By this data set-
ting, the pages C3 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
23. C4 Page table
Note 1:
Note 1:
If reading/writing data on pages C4, set data: 0C to page:
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 4. By this data set-
ting, the pages C4 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
24. C5 Page table
Note 1:
Note 1:
If reading/writing data on pages C5, set data: 0C to page:
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 5. By this data set-
ting, the pages C5 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
25. C6 Page table
Note 1:
Note 1:
If reading/writing data on pages C6, set data: 0C to page:
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 6. By this data set-
ting, the pages C6 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to D4
Fixed data-1 (Initialized data)
26. C7 Page table
Note 1:
Note 1:
If reading/writing data on pages C7, set data: 0C to page:
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 7. By this data set-
ting, the pages C7 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
6-21
DCR-VX2200E_ADJ
27. C8 Page table
Note 1:
Note 1:
If reading/writing data on pages C8, set data: 0C to page:
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 8. By this data set-
ting, the pages C8 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
28. C9 Page table
Note 1:
Note 1:
If reading/writing data on pages C9, set data: 0C to page:
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: 9. By this data set-
ting, the pages C9 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
29. CA Page table
Note 1:
Note 1:
If reading/writing data on pages CA, set data: 0C to page:
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: A. By this data set-
ting, the pages CA can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to FF
Fixed data-1 (Initialized data)
30. CB Page table
Note 1:
Note 1:
If reading/writing data on pages CB, set data: 0C to page:
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: B. By this data set-
ting, the pages CB can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to D4
Fixed data-1 (Initialized data)
31. CC Page table
Note 1:
Note 1:
If reading/writing data on pages CC, set data: 0C to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: C. By this data set-
ting, the pages CC can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to C7
Fixed data-1 (Initialized data)
6-22
DCR-VX2200E_ADJ
32. CD Page table
Note 1:
Note 1:
If reading/writing data on pages CD, set data: 0C to page:
0, address: 10, and then select pages: D. By this data
setting, the pages CD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: D. By this data
setting, the pages CD can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to 11
Fixed data-1 (Initialized data)
12
Fixed data-2
13 to 1C
Fixed data-1 (Initialized data)
1D
Fixed data-2
1E to 2F
Fixed data-1 (Initialized data)
30 to 32
Fixed data-2
33
Fixed data-1 (Initialized data)
34, 35
Fixed data-2
36
Fixed data-1 (Initialized data)
37 to 3A
Fixed data-2
3B
Fixed data-1 (Initialized data)
3C, 3D
Fixed data-2
3E
Fixed data-1 (Initialized data)
3F
Fixed data-2
40 to 4F
Fixed data-1 (Initialized data)
50
Fixed data-2
51 to 53
Fixed data-1 (Initialized data)
54 to 57
Fixed data-2
58 to 87
Fixed data-1 (Initialized data)
88 to 95
Fixed data-2
96 to 99
Fixed data-1 (Initialized data)
9A to A3
Fixed data-2
A4, A5
Fixed data-1 (Initialized data)
A6 to AB
Fixed data-2
AC, AD
Fixed data-1 (Initialized data)
AE to B3
Fixed data-2
B4, B5
Fixed data-1 (Initialized data)
B6 to B9
Fixed data-2
BA to BE
Fixed data-1 (Initialized data)
BF
Fixed data-2
C0 to C2
Fixed data-1 (Initialized data)
C3
Fixed data-2
C4
Fixed data-1 (Initialized data)
C5
Fixed data-2
C6
Fixed data-1 (Initialized data)
C7
Fixed data-2
C8
Fixed data-1 (Initialized data)
C9
Fixed data-2
CA
Fixed data-1 (Initialized data)
CB
Fixed data-2
CC
Fixed data-1 (Initialized data)
CD
Fixed data-2
CE
Fixed data-1 (Initialized data)
CF
Fixed data-2
D0 to FF
Fixed data-1 (Initialized data)
Address
Initial value
Remark
6-23
DCR-VX2200E_ADJ
33. CE Page table
Note 1:
Note 1:
If reading/writing data on pages CE, set data: 0C to page:
0, address: 10, and then select pages: E. By this data set-
ting, the pages CE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: E. By this data set-
ting, the pages CE can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
00 to 03
Fixed data-1 (Initialized data)
04
Fixed data-2
05 to 0F
Fixed data-1 (Initialized data)
10 to 13
Fixed data-2
14 to 1D
Fixed data-1 (Initialized data)
1E, 1F
Fixed data-2
20 to 22
Fixed data-1 (Initialized data)
23, 24
Fixed data-2
25
Fixed data-1 (Initialized data)
26
Fixed data-2
27 to 2A
Fixed data-1 (Initialized data)
2B, 2C
Fixed data-2
2D
Fixed data-1 (Initialized data)
2E to 31
Fixed data-2
32
Fixed data-1 (Initialized data)
33
Fixed data-2
34
Fixed data-1 (Initialized data)
35, 36
Fixed data-2
37 to 3A
Fixed data-1 (Initialized data)
3B, 3C
Fixed data-2
3D to 5C
Fixed data-1 (Initialized data)
5D
Fixed data-2
5E to 79
Fixed data-1 (Initialized data)
7A to 7D
Fixed data-2
7E to 83
Fixed data-1 (Initialized data)
84, 85
Fixed data-2
86 to 91
Fixed data-1 (Initialized data)
92, 93
Fixed data-2
94 to 97
Fixed data-1 (Initialized data)
98 to 9D
Fixed data-2
9E
Fixed data-1 (Initialized data)
9F
Fixed data-2
A0 to C1
Fixed data-1 (Initialized data)
C2 to C5
Fixed data-2
C6 to EE
Fixed data-1 (Initialized data)
EF
Fixed data-2
F0 to FF
Fixed data-1 (Initialized data)
Address
Initial value
Remark
00 to 8F
Fixed data-1 (Initialized data)
90 to 9F
Fixed data-2
A0 to B0
Fixed data-1 (Initialized data)
B1 to BD
Fixed data-2
BE
Fixed data-1 (Initialized data)
BF
Fixed data-2
C0 to C7
Fixed data-1 (Initialized data)
C8 to CF
Fixed data-2
D0 to E8
Fixed data-1 (Initialized data)
E9
Fixed data-2
EA
Fixed data-1 (Initialized data)
EB to EF
Fixed data-2
F0 to FF
Fixed data-1 (Initialized data)
34. CF Page table
Note 1:
Note 1:
If reading/writing data on pages CF, set data: 0C to page:
0, address: 10, and then select pages: F. By this data set-
ting, the pages CF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
0, address: 10, and then select pages: F. By this data set-
ting, the pages CF can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Click on the first or last page to see other DCR-VX2200E (serv.man2) service manuals if exist.