DOWNLOAD Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) Service Manual ↓ Size: 5.26 MB | Pages: 127 in PDF or view online for FREE

Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom sparingly results in better-looking recordings.

W : Wide-angle (The subject appears farther away.)

T : Telephoto (The subject appears closer.)

×

Zoom greater than 10

× is performed digitally. Digital zoom can be set to 20× or 120×.

To activate digital zoom, select the digital zoom power in D ZOOM in 

 in the menu

settings (p. 174). The digital zoom is set to OFF as a default setting.
The picture quality deteriorates because the picture is processed digitally.

When you shoot close to a subject
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 5/8 feet)
away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch)
away in the wide-angle position.

When the POWER switch is set to MEMORY
You cannot use the digital zoom.

The right side of the bar shows the digital zooming
zone.
The digital zooming zone appears when you select
the digital zoom power in the menu settings.

T

W

T

W

T

W

When you shoot a subject with the light source behind the subject or a subject with a
light background, use the back light function.

(1) Set the POWER switch to CAMERA or MEMORY.
(2) Press BACK LIGHT.

The . indicator appears on the screen.

Press BACK LIGHT again.

When shooting backlit subjects
If you set EXPOSURE to MANUAL (p. 61) or select SPOT METER (p. 62), the back light
function will be canceled.

NightShot enables you to shoot a subject in the night or in a dark place.
When using NightShot, the picture may be recorded in incorrect or unnatural colors.

(1) Set the POWER switch to CAMERA or MEMORY.
(2) Slide NIGHTSHOT to ON.

The 

 and ”NIGHTSHOT” indicators flash on the screen.

To cancel NightShot
Slide NIGHTSHOT to OFF.

NIGHTSHOT

ON

OFF

Super NightShot makes subjects more than 16 times brighter than those recorded using
NightShot.

(1) Set the POWER switch to CAMERA.
(2) Slide NIGHTSHOT to ON.

The 

 and ”NIGHTSHOT” indicators flash on the screen.

(3) Press FN and select PAGE3.
(4) Press SUPER NS.

The 

 indicator lights up on the screen.

(5) Press EXIT to return to FN.

To cancel Super NightShot
Press SUPER NS again to make the   indicator disappear. To cancel NightShot, slide
NIGHTSHOT to OFF.

The picture will be clearer with the NightShot Light on. To enable the NightShot Light,
set N.S. LIGHT in 

 to ON in the menu settings. (The default setting is ON.)

Color Slow Shutter enables you to record color images in a dim place.

(1) Set the POWER switch to CAMERA.
(2) Slide NIGHTSHOT to OFF.
(3) Press FN and select PAGE3.
(4) Press COLOR SLW S.

The 

 indicator lights up on the screen.

To cancel Color Slow Shutter
Press COLOR SLW S again to make the 

 indicator disappear.

Notes
•Do not use NightShot in bright places (e.g. the outdoors in the daytime). This may

cause a malfunction.

•While recording using the NightShot Light, attaching the lens hood may block the

NightShot Light. Remove the lens hood when you use the NightShot Light.

•If focusing is difficult while recording using NightShot, focus manually.
•While recording using the NightShot Light, do not obstruct the Infrared rays

(NightShot Light) emitter with your fingers.

NIGHTSHOT

ON

OFF

While using NightShot, you cannot use the following functions:
– White balance
– PROGRAM AE

(The indicator flashes.)

– Manual exposure
– Flexible Spot Meter
– HOLOGRAM AF

While using Super NightShot or Color Slow Shutter
The shutter speed is automatically adjusted depending on the brightness. At this time,
the motion of the picture may slow down.

While using Super NightShot, you cannot use the following functions:
– White balance
– Fader
– Digital effect
– PROGRAM AE
– Manual exposure
– Flexible Spot Meter
– Recording with the flash
– Progressive Recording Mode

When the POWER switch is set to MEMORY
You cannot use the following functions:
– Super NightShot
– Color Slow Shutter

NightShot Light
•Invisible infrared beams of light are used for the NightShot Light. The maximum

shooting distance using the NightShot Light is about 3 m (10 feet).

•Attaching the lens hood (supplied) or a conversion lens (optional) may obstruct the

infrared rays.

While using Color Slow Shutter, you cannot use the following functions:
– Fader
– Digital effect
– PROGRAM AE
– Manual exposure
– Flexible Spot Meter
– Recording with the flash
– Progressive Recording Mode

In total darkness
Color Slow Shutter may not work normally.