Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) Service Manual ▷ View online
41
Playback – Basics
Using the Remote Commander
Press DATA CODE on the Remote Commander during playback.
The display changes as follows each time you press DATA CODE:
The display changes as follows each time you press DATA CODE:
date/time
t various settings (SteadyShot off, exposure, white balance, gain,
shutter speed, aperture value)
t (no indicator)
To not display the various settings
Set DATA CODE in
to DATE in the menu settings (p. 181).
The display changes as follows each time you press DATA CODE on the Remote
Commander:
date/time
Commander:
date/time
y (no indicator)
Various settings
Various settings show your camcorder’s recording information when you recorded.
During recording, the various settings are not displayed.
Various settings show your camcorder’s recording information when you recorded.
During recording, the various settings are not displayed.
When you use data code, bars (-- -- --) appear if:
– A blank portion of the tape is being played back.
– The tape is unreadable due to tape damage or noise.
– The tape was recorded by a camcorder without the date and time set.
– A blank portion of the tape is being played back.
– The tape is unreadable due to tape damage or noise.
– The tape was recorded by a camcorder without the date and time set.
Data code
When you connect your camcorder to a TV, the data code also appears on the TV
screen.
When you connect your camcorder to a TV, the data code also appears on the TV
screen.
Playing back a tape
42
Playing back a tape
Various playback modes
To operate video control buttons, set the POWER switch to VCR.
Using the touch panel
(1) Press FN and select PAGE3.
(2) Press V SPD PLAY to display video control buttons.
(2) Press V SPD PLAY to display video control buttons.
To change the playback direction
Press
during playback to reverse the playback direction.*
To locate a scene while monitoring the picture (picture search)
Keep pressing
or
during playback. To resume normal playback, release the
button.
To monitor the high-speed picture while fastforwarding or
rewinding the tape (skip scan)
rewinding the tape (skip scan)
Keep pressing
while fastforwarding or
while rewinding the tape. To resume
fastforwarding or rewinding, release the button.
To view the picture at slow speed (slow playback)
Press
during playback.*
For slow playback in the reverse direction, press
, then press
.*
To view the picture at double speed
Press
during playback.*
For double speed playback in the reverse direction, press
, then press
.*
To view the picture frame-by-frame
Press
during playback pause.**
For frame-by-frame playback in the reverse direction, press
.**
To search the last recorded scene (END SEARCH)
Press END SCH on PAGE1 in the stop state. The last five seconds of the recorded
section is played back, then your camcorder stops.
section is played back, then your camcorder stops.
* Press
to pause playback. Press
to resume normal playback.
** Press
to resume normal playback.
43
Playback – Basics
Video control buttons
Marks on your camcorder are different from those on the Remote Commander supplied
with your camcorder.
Marks on your camcorder are different from those on the Remote Commander supplied
with your camcorder.
On your camcorder:
To play back or pause the tape
To stop the tape
To rewind the tape
To fastforward the tape
To play back the tape slowly
To forward one frame at a time
To rewind one frame at a time
To play back the tape at double speed
To stop the tape
To rewind the tape
To fastforward the tape
To play back the tape slowly
To forward one frame at a time
To rewind one frame at a time
To play back the tape at double speed
On the Remote Commander:
N
N
To play back the tape
X
To pause the tape
x
To stop the tape
m
To rewind the tape
M
To fastforward the tape
y
To play back the tape slowly
C
To forward one frame at a time
c
To rewind one frame at a time
×2
To play back the tape at double speed
In the various playback modes
•Sound is muted.
•The previous picture may remain as a mosaic image during playback.
•Sound is muted.
•The previous picture may remain as a mosaic image during playback.
When you play back the tape in reverse
Horizontal noise may appear at the center, or the top and bottom of the screen. This is
not a malfunction.
Horizontal noise may appear at the center, or the top and bottom of the screen. This is
not a malfunction.
Slow playback
Slow playback can be performed smoothly on your camcorder. However, this function
does not work for an output signal from the DV Interface.
Slow playback can be performed smoothly on your camcorder. However, this function
does not work for an output signal from the DV Interface.
Playing back a tape
44
Connect your camcorder to the TV with the A/V connecting cable supplied with your
camcorder to watch the playback pictures on the TV screen. You can operate the video
control buttons in the same way as when you view playback pictures on the LCD
screen.
When viewing the playback picture on the TV screen, we recommend that you power
your camcorder from a wall outlet using the AC Adaptor. Refer to the operating
instructions of your TV.
camcorder to watch the playback pictures on the TV screen. You can operate the video
control buttons in the same way as when you view playback pictures on the LCD
screen.
When viewing the playback picture on the TV screen, we recommend that you power
your camcorder from a wall outlet using the AC Adaptor. Refer to the operating
instructions of your TV.
Open the jack cover. Connect your camcorder to the TV with the A/V connecting cable.
Then set the TV/VCR selector on the TV to VCR to be able to view images from your
camcorder.
Then set the TV/VCR selector on the TV to VCR to be able to view images from your
camcorder.
If your TV is already connected to the VCR
Connect your camcorder to the LINE IN input on the VCR with the A/V connecting
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
cable supplied with your camcorder. Set the input selector on the VCR to LINE.
If your TV or VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV.
If you connect the white plug, the sound is L (left) signal. If you connect the red plug,
the sound is R (right) signal.
white or the red plug to the audio input jack on the VCR or the TV.
If you connect the white plug, the sound is L (left) signal. If you connect the red plug,
the sound is R (right) signal.
Viewing a recording on the TV
TV
S VIDEO
VIDEO
AUDIO
IN
S VIDEO
AUDIO/
VIDEO
VIDEO
Yellow
Red
White
: Signal flow
A/V connecting cable
(supplied)
(supplied)
Click on the first or last page to see other DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) service manuals if exist.