Sony DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E Service Manual ▷ View online
— 41 —
6. Exploded Views
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
701
704
701
703
707
708
709
709
706
702
705
710
711
M901 (Note 1:)
LS chassis block
assembly
(See page 42)
assembly
(See page 42)
Mechanical chassis block
assembly
(See page 43 to 44)
assembly
(See page 43 to 44)
(Note 2:)
(Note 2:)
(Note 3:)
Note 1: Type name and part code number of the M901
drum differ depending on models. Refer to
Service Manual of the respective models.
Note 2: Either 709 or 711 is attached depending on the type.
drum differ depending on models. Refer to
Service Manual of the respective models.
Note 2: Either 709 or 711 is attached depending on the type.
Identify which method of type is used by referring to
the description on page 4.
the description on page 4.
Note 3: There are two types of mechanism. One type has
the HLC CUT 1.8
the HLC CUT 1.8
×
4
×
0.5 while the other type does
not have it. The HLC CUT 1.8
×
4
×
0.5 needs not to
be installed during re-assembling.
6-1. Cassette Compartment Assy, Drum Assy
701
3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA
702
3-065-895-01 LEVER, REEL RELEASE
703
3-065-896-01 PLATE, BLIND
704
X-3951-298-1 CASSETTE COMPARTMENT ASSY
705
X-3951-302-1 DAMPER ASSY
706
X-3951-297-1 GEAR ASSY, R DRIVE
707
3-065-840-01 CUT (0.98X3X0.13), LUMILER (W)
708
3-065-935-01 HLC CUT 1.8X4X0.5
709
3-947-503-21 SCREW (M1.4)
710
X-3951-299-1 SCREW ASSY, DRUM FITTING
711
7-624-101-04 STOP RING 1.2 (E TYPE)
M901
— Note 1 —
DRUM
— 42 —
751
753
757
754
783
752
752
774
777
784
767
(Note 3:)
not supplied
776
778
779
759
758
760
771
756
762
764
763
761
766
772
775
769
768
770
771
781
773
780
755
not
supplied
supplied
FP-300
not supplied
not supplied
LS-057/
FP-802/FP-391
not supplied
FP-802/FP-391
not supplied
FP-301
not supplied
not supplied
FP-302
not supplied
not supplied
H001
H002
D001
S001
Q001
Q002
S002
Note 1: There are two types of Cassette Guide S (779). One type is fixed by the screw while the other type is not fixed by the screw.
When replacing it, fix it with screw (783).
Note 2: There are two types of this part. One type has the screw (784) and the Lid Opener Plate (not supplied) while the other type
does not have them.
Note 3: There are two types of this part. One type has the screw (767) and the LS Cam Plate (768) while the other type does not have them.
Identify which method of type is used by referring to the description on page 3.
(Note 3:)
(Note 2:)
(Note 2:)
(Note 1:)
782
6-2. LS Chassis Block Assembly
751
3-065-822-02 RAIL (S), GUIDE
752
3-947-503-21 SCREW (M1.4)
753
A-7096-416-B BASE (S) BLOCK ASSY, GUIDE
754
A-7096-415-A BASE (T) BLOCK ASSY, GUIDE
755
A-7096-426-A CHASSIS ASSY, LS
756
3-065-802-01 SPRING, TG7 ARM
757
A-7096-414-A ARM BLOCK ASSY, TG7
758
3-065-801-01 RETAINER, TG7
759
3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA
760
X-3951-303-1 ARM ASSY, PINCH
761
3-065-823-01 ARM, T RATCHET
762
3-065-794-01 ROAD (SPR), PINCH ARM
763
3-065-792-01 ROLLER, P LIM ARM
764
3-065-834-01 GUIDE (T), CASSETTE
766
A-7096-417-A SOFT ASSY, T
767
3-071-650-01 SCREW (M1.7)
768
3-065-832-01 PLATE, LS CAM
769
3-065-828-01 ARM, S RATCHET
770
3-065-829-01 PLATE, S RATCHET (RE)
771
3-071-787-01 SPRING (S), S RATCHET
772
X-3951-288-1 TABLE (T) ASSY, REEL
773
3-065-819-01 SPRING, TG1 ARM
774
3-065-821-01 RAIL (T), GUIDE
775
X-3951-289-1 TABLE (S) ASSY, REEL
776
3-065-833-01 GUIDE, LOCK
777
3-065-831-01 PLATE (SPR), RE RETURN
778
X-3951-304-1 ARM ASSY, TG1
779
3-065-835-01 GUIDE (S), CASSETTE
780
3-065-820-01 SPRING, RVS ARM
781
X-3951-296-1 BAND (ASSY), BT
782
3-065-836-01 COVER, LS GREASE
783
3-067-167-01 SCREW (M1.4X2), CAMERA TAPPING
784
3-947-503-21 SCREW (M1.4)
D001
6-500-471-01 DIODE GL453E00000F (TAPE LED)
H001
6-500-945-01 ELEMENT, HALL HW-105C-LF (T REEL)
H002
6-500-945-01 ELEMENT, HALL HW-105C-LF (S REEL)
Q001
6-550-402-01 PHOTO TRANSISTOR PT4850FE000F (TAPE TOP)
Q002
6-550-402-01 PHOTO TRANSISTOR PT4850FE000F (TAPE END)
S001
1-692-614-11 SWITCH, PUSH (3 KEY) (REC PROOF)
S002
1-771-326-41 SWITCH, PUSH LEVER (1 KEY)
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
— 43 —
805
810
802
809
802
815
824
817
819
802
823
820
821
822
815
818
816
811
805
807
815
814
813
812
806
801
803
804
808
M902
M903
not
supplied
supplied
not
supplied
supplied
Mechanical chassis
block assembly-2
(See page 44)
block assembly-2
(See page 44)
6-3. Mechanical Chassis Block Assembly-1
801
A-7096-422-A BASE ASSY, DRUM
802
3-947-503-01 SCREW (M1.4)
803
3-065-928-01 SPACER, GROUND
804
3-065-927-01 GROUND, DRUM
805
3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA
806
3-067-154-01 SPRING, CAPSTAN
807
3-065-931-01 RAIL (T2), GUIDE
808
X-3947-398-1 SCREW ASSY, M1.7 PW
809
3-065-933-01 PAN (2 MAIN 1.4X4.5), CAMERA
810
1-677-049-11 FP-228 FLEXIBLE BOARD (DEW SENSOR)
811
1-681-272-15 FP-299 FLEXIBLE BOARD
812
3-065-877-01 PLATE (T), GUIDE LOCK
813
3-065-879-01 PLATE, PR PRESSURE
814
3-065-881-01 SPRING, P PRESSURE PLATE
815
3-065-934-01 HLW CUT 0.98X3X0.25
816
1-786-096-11 SWITCH, ROTARY
817
3-065-898-01 SPRING, EJECT ARM
818
3-065-870-01 ROLLER, LS GUIDE
819
A-7096-421-A ARM ASSY, HCL
820
3-065-918-01 GEAR (2), CAM RELAY
821
A-7096-419-A GEAR ASSY, CHANGE
822
3-065-902-01 BELT, TIMING
823
3-065-905-01 GEAR, RELAY
824
3-065-882-01 ARM, EJECT
M902
8-835-701-05 MOTOR, DC SCE13A/C-NP (CAPSTAN)
M903
A-7096-420-A MOTOR ASSY, LD (LOADING)
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
— 44 —
852
855
856
858
857
860
859
861
865
866
867
851
853
862
864
863
Note 1: There are two types
of the mechanism
chassis shaft A.
of the mechanism
chassis shaft A.
854
868
869
Note 2: There are two types of this part. One type has the LS Guide A Roller (869) while the other type does not have it.
Note 3: When replacing the mechanical chassis assembly (868), and when re-assembling it, replace the stop ring 1.2 (E type) (711)
Note 3: When replacing the mechanical chassis assembly (868), and when re-assembling it, replace the stop ring 1.2 (E type) (711)
and the LS Guide A Roller (869) as a pair.
Identify which method of type is used by referring to the description on page 4.
Identify which method of type is used by referring to the description on page 4.
(Note 3:)
(Note 2:)
Ref. No.
Part No.
Description
Remarks
Ref. No.
Part No.
Description
Remarks
851
3-065-920-01 ARM, HC DRIVE
852
3-065-913-01 GEAR (4), LD
853
3-065-914-01 SHEET, COVER
854
3-065-917-01 GEAR (1), CAM RELAY
855
3-065-934-01 HLW CUT 0.98X3X0.25
856
3-065-915-01 GEAR (1), CAM
857
3-065-878-01 PLATE (S), GUIDE LOCK
858
3-065-932-01 PAN (2 MAIN M1.4X1.6), CAMERA
859
A-7096-413-A GEAR (S) ASSY, GUIDE
860
7-624-101-04 STOP RING 1.2 (E TYPE)
861
A-7096-412-A GEAR (T) ASSY, GUIDE
862
X-3951-307-1 PLATE ASSY, M SLIDE
863
X-3951-305-1 ARM ASSY, LS
864
3-065-901-01 ROLLER, LS ARM
865
3-065-916-01 GEAR (2), CAM
866
3-065-919-01 ARM, T1 LIMITTER
867
X-3951-308-1 ARM ASSY, GL
868
X-3951-300-2 CHASSIS ASSY, MECHANICAL
869
3-074-309-01 ROLLER A, LS GUIDE
6-4. Mechanical Chassis Block Assembly-2
Click on the first or last page to see other DCR-TRV130 / DCR-TRV130E / DCR-TRV230 / DCR-TRV230E / DCR-TRV235E / DCR-TRV325E / DCR-TRV330 / DCR-TRV330E / DCR-TRV430E / DCR-TRV530 / DCR-TRV530E / DCR-TRV725E / DCR-TRV730 / DCR-TRV730E / DCR-TRV828 / DCR-TRV828E / DCR-TRV830 / DCR-TRV830E service manuals if exist.