Sony DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man4) Service Manual ▷ View online
6-35
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
6.
CAMERA Adjustment 3
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
ject in accordance with the message.
4) If the [OK] button is clicked, “2. Flange Back Check” is ex-
ecuted. The following messages are displayed, and then oper-
ate the camera to make a check in accordance with the mes-
sages.
ate the camera to make a check in accordance with the mes-
sages.
5) Upon completion of “2. Flange Back Check”, “3. Release of
Data Setting during Camera Adj.” is executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK] button.
[OK] button.
Ver. 1.7 2008.04
6-36
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
7.
CAMERA Adjustment 4
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Center Frame)
3. F No. Standard Data Input
4. MAX GAIN Adj.
5. Mechanical Shutter Adj.
6. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Center Frame)
3. F No. Standard Data Input
4. MAX GAIN Adj.
5. Mechanical Shutter Adj.
6. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Select the model (NTSC Model or PAL Model) with the Model
1) Select the model (NTSC Model or PAL Model) with the Model
Select radio button.
Note:
NTSC model: DCR-SR62/SR82/SR82C
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
2) Click the [Start] button of the CAMERA Adjustment 4.
3) The Automatic Adjustment Program executes “1. Data Setting
3) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
4) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed during the
execution of “2. Picture Frame Setting (Center Frame)”. Set
the subject in accordance with the message.
execution of “2. Picture Frame Setting (Center Frame)”. Set
the subject in accordance with the message.
5) If the [OK] button is clicked, the following message is dis-
played, and then check the size of clear chart shot on the moni-
tor screen.
tor screen.
6) After the checking, if the [OK] button in the message window
is clicked, the adjustment items from “3. F No. Standard Data
Input” to “5. Mechanical Shutter Adj.” are executed.
Input” to “5. Mechanical Shutter Adj.” are executed.
7) Upon successful completion of all items of the CAMERA
Adjustment 4, the following message is displayed. Click the
[OK] button.
[OK] button.
Ver. 1.7 2008.04
6-37
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
8.
CAMERA Adjustment 5
[Switch setting]
1. POWER switch ............................................................ Movie
2. NIGHTSHOT PLUS switch ........................................ OFF
3. WIDE SELECT button ................................................ 4:3
1. POWER switch ............................................................ Movie
2. NIGHTSHOT PLUS switch ........................................ OFF
3. WIDE SELECT button ................................................ 4:3
[Picture Frame Setting (Color reproduction adjustment
frame)]
1) Shoot the color bar chart.
frame)]
1) Shoot the color bar chart.
PTB-450: 1 m from the front of lens
PTB-1450: 40 cm from the front of lens
PTB-1450: 40 cm from the front of lens
2) Adjust the zoom and the camera direction, and set the speci-
fied position.
Check on the oscilloscope
1. Horizontal period
2. Vertical period
Check on the monitor TV (Underscanned mode)
Fig. 6-1-18
[Adjusting method]
1) Click the [Start] button in CAMERA Adjustment 5, and the
1) Click the [Start] button in CAMERA Adjustment 5, and the
following screen will appear.
2) Select the model (NTSC or PAL) with the Model Select radio
button.
Note:
NTSC model: DCR-SR62/SR82/SR82C
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
3) Click the [Color Reproduction Adjustment] button.
4) The following message will be displayed, and then shoot the
color bar chart and set the picture frame, and then click the
[OK] button.
(Refer to “Picture Frame Setting”)
[OK] button.
(Refer to “Picture Frame Setting”)
A = B
C = D
A
B
C
D
H
E = F
V
E
F
Color bar chart picture frame
Monitor TV picture frame
Ver. 1.7 2008.04
6-38
DCR-SR32E/SR33E/SR42/SR42A/SR42E/SR52E/SR62/SR62E/SR72E/SR82/SR82C/SR82E_ADJ
5) The data with the color bar chart are captured, and then the
following message will be displayed.
With the picture frame setting retained, replace the color bar
chart with the clear chart and press the [OK] button.
With the picture frame setting retained, replace the color bar
chart with the clear chart and press the [OK] button.
6) The data with the clear chart are captured, and then the fol-
lowing message will be displayed.
With the clear chart in shooting state, place the C14 filter on
the lens and click the [OK] button.
With the clear chart in shooting state, place the C14 filter on
the lens and click the [OK] button.
7) The data with the clear chart + C14 filter are captured, and
then the following message will be displayed.
Replace the clear chart with the color bar chart, and with the
C14 filter placed on the lens, click the [OK] button.
Replace the clear chart with the color bar chart, and with the
C14 filter placed on the lens, click the [OK] button.
8) The data with the color bar chart
+ C14 filter are captured, the
adjustment value is calculated, and it is written to the
camcorder.
Upon successful completion, the following message will be
displayed.
Click the [OK] button, and thus the adjustment is complete.
camcorder.
Upon successful completion, the following message will be
displayed.
Click the [OK] button, and thus the adjustment is complete.
[Checking method]
1) Click the [Start] button in CAMERA Adjustment 5, and the
1) Click the [Start] button in CAMERA Adjustment 5, and the
following screen will appear.
2) Select the model (NTSC or PAL) with the Model Select radio
button.
Note:
NTSC model: DCR-SR62/SR82/SR82C
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
PAL model: DCR-SR52E/SR62E/SR72E/SR82E
3) Click the [Color Reproduction Check] button.
4) The following message will be displayed, and then shoot the
color bar chart and set the picture frame, and then click the
[OK] button.
(Refer to “Picture Frame Setting”)
[OK] button.
(Refer to “Picture Frame Setting”)
Ver. 1.7 2008.04
Click on the first or last page to see other DCR-SR32E / DCR-SR33E / DCR-SR42 / DCR-SR42A / DCR-SR42E / DCR-SR52E / DCR-SR62 / DCR-SR62E / DCR-SR72E / DCR-SR82 / DCR-SR82C / DCR-SR82E (serv.man4) service manuals if exist.