GO AND PLAY 5V — Harman Kardon Audio Service Manual (repair manual)

Model
GO AND PLAY 5V
Pages
17
Size
2.01 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
go-and-play-5v.pdf
Date

View Harman Kardon GO AND PLAY 5V Service Manual online

 
 
harman/kardon
    
            Service Manual
 
 
 
                               
                                                 
GO + PLAY 5v 
Speaker dock 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Released EU2012   
 
Harman Consumer Group, Inc.   
                Rev 1, 04/2013 
 
 
 
 
 
       8500 Balboa Boulevard 
 
 
 
 
 
   Northridge, California 91329 
CONTENTS 
ESD WARNING 
 
 
 
OWNER’S MANUAL   
 
 
EXPLODED VIEW AND PARTS LIST           10 
SCHEMATIC DIAGRAMS   
         11 
Each precaution in this manual should be followed during servicing.
Components identified with the IEC symbol
in the parts list are special significance to safety. When replacing a component identified with
, use only the replacement parts designated, or parts with the same ratings or resistance, wattage, or voltage that are designated in the
parts list in this manual. Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably
insulated from the supply circuit before retuming the product to the customer.
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called
Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field effect transistors and
semiconductor "chip" components.
The following techniques should be used to help reduce the incidence of component damage caused by static electricity.
1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on
your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device,
which should be removed for potential shock reasons prior to applying power to the unit under test.
2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as aluminum foil, to
prevent electrostatic charge build-up or exposure of the assembly.
3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.
4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges
sufficient to damage ES devices.
5. Do not use freon-propelled chemicals. These can generate electrical change sufficient to damage ES devices.
6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most replacement
ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive material.)
7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material to the
chassis or circuit assembly into which the device will be installed.
Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together
or your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ES devices.
CAUTION :
 
 
 
 
 
 
 
 
 
 
 
 
Harman Kardon
Go + Play 5V service manual
Page 2 of 15
User Guide
English
bärbara hi-fi högtalare för 
iPod
Harman Kardon
Go + Play 5V service manual
Page 3 of 15
2
•.Read.these.instructions,.heed.all.warnings.and.keep.for.future.reference.
•.Do.not.use.this.apparatus.near.water.
•.Clean.only.with.a.dry.cloth.
•.Do.not.block.any.ventilation.openings;.a.minimum.distance.of.10mm.(3/8").around.the.entire.apparatus.is.required.for.sufficient.ventilation..
•.No.naked.flame.sources.such.as.lighted.candles.should.be.placed.on.or.near.the.apparatus.
•.Do.not.expose.the.speakers.to.liquid.or.solvent.
•.Never.remove.grille.covers.in.order.to.service.the.speaker.system..The.speaker.system.does.not.contain.any.user-serviceable.parts..Refer.all.servicing.to..
...Harman.Consumer.Group,.Inc.,.Customer.Support.
•.Do.not.expose.the.speaker.system.to.temperature.or.humidity.extremes,.direct.sunlight,.excessive.dust.or.vibrations..Do.not.install.near.any.heat.sources..
...such.as.radiators,.heat.registers,.stoves.or.other.apparatus.(including.amplifiers).that.produce.heat.
•.Place.the.speaker.system.on.a.stable,.level.surface..Do.not.drop,.apply.excessive.force.to.the.controls.or.put.heavy.objects.on.top.of.the.unit.
•.If.cleaning.is.required,.use.a.soft,.dry.cloth..If.necessary,.use.a.damp.cloth.without.any.solvents.
•.In.order.to.protect.the.speaker.system,.avoid.microphone.feedback,.continuous.output.from.electronic.musical.instruments.or.distorted.output.from.any..
...signal.source.
•.Attention.should.be.drawn.to.the.environmental.aspects.of.battery.disposal..
•.Apparatus.is.to.be.used.in.moderate.climates.only..
•.Do.not.defeat.the.safety.purpose.of.the.polarizing.or.grounding-type.plug..A.polarizing.plug.has.two.blades,.with.one.wider.than.the.other..A.grounding-.
...type.plug.has.two.blades.and.a.third.grounding.prong..The.wide.blade,.or.third.prong,.is.provided.for.safety..If.the.provided.plug.does.not.fit.into.your..
...outlet,.consult.an.electrician.for.replacement.of.the.obsolete.outlet.
•.Protect.the.power.cord.from.being.walked.on.or.pinched,.particularly.at.the.plug.and.convenience.receptacle,.and.at.the.point.where.it.exits.from..
...the.apparatus.
•.Only.use.attachments/accessories.specified.by.the.manufacturer.
•.Unplug.this.apparatus.during.lightning.storms.or.when.unused.for.long.periods.of.time.
•.Refer.all.servicing.to.qualified.service.personnel..Servicing.is.required.when.the.apparatus.has.been.damaged.in.any.way,.such.as.power-supply.cord.or..
...plug.is.damaged,.liquid.has.been.spilled.or.objects.have.fallen.into.the.apparatus,.the.apparatus.has.been.exposed.to.rain.or.moisture,.does.not.operate..
...normally,.or.has.been.dropped.
•.TO.PREVENT.THE.RISK.OF.ELECTRIC.SHOCK,.DO.NOT.REMOVE.THE.COVER.(OR.BACK)..THERE.ARE.NO.USER-SERVICEABLE.PARTS.INSIDE..
...THIS.UNIT..PLEASE.REFER.SERVICING.TO.QUALIFIED.HARMAN.CONSUMER.GROUP,.INC.,.SERVICE.PERSONNEL.
•.WARNING:.Listening.at.high.volume.levels.may.cause.permanent.damage.to.your.hearing..Always.set.the.volume.control.to.the.lowest.level.before..
...switching.to.different.sources.(tuner,.CD.player,.MP3.player,.etc.).or.before.plugging.in.the.Harman.Kardon.Go.+.Play.unit..
•.WARNING:.To.reduce.the.risk.of.fire.or.electric.shock,.do.not.expose.this.speaker.system.to.rain.or.moisture.
Important.Safety.Instructions
Please.read.the.following.precautions.before.use:
Important Note for All Electronic Products:
Before.inserting.or.unplugging.audio.cables.from.the.source.device’s.
headphones. or. line-level. output. jacks,. it. is. good. practice. to. turn. off.
the.device.first..This.will.prolong.the.life.of.your.unit,.help.protect.your..
device.from.static.electricity.and.prevent.potential.damage.
CAUTION
 
 
WARNING: TO.PREVENT.FIRE.OR.ELECTRICAL.SHOCK.
HAZARD,.DO.NOT.EXPOSE.THIS.PRODUCT.TO.RAIN.
OR.MOISTURE.
WARNING: THE.APPARATUS.SHOULD.NOT.BE.EXPOSED.
TO.DRIPPING.OR.SPLASHING.AND.NO.OBJECTS.FILLED.
WITH.LIQUID,.SUCH.AS.VASES,.SHOULD.BE.PLACED.ON.
THE.APPARATUS.
THE.EXCLAMA-
TION.POINT.
WITHIN.THE.
TRIANGLE.IS.A.
WARNING.SIGN.
ALERTING.YOU.
TO.IMPORTANT.
INSTRUCTIONS.
ACCOMPANYING.
THE.PRODUCT..
CAUTION:.TO.REDUCE.THE.
RISK.OF.SHOCK,.DO.NOT.
REMOVE.COVER..NO.USER-
SERVICEABLE.PARTS.INSIDE..
REFER.SERVICING.TO.QUALI-
FIED.SERVICE.PERSONNEL..
THE.LIGHTNING.
FLASH.AND..
ARROWHEAD.
WITHIN.THE.
TRIANGLE.IS.A.
WARNING.SIGN.
ALERTING.YOU.
TO.DANGEROUS.
VOLTAGE.INSIDE.
THE.PRODUCT.
RISK OF ELECTRIC SHOCK  
DO NOT OPEN
SEE.MARKING.ON.BOTTOM.OF.PRODUCT.
ATTENTION!
It is considered good practice to always connect the power  
supply to your Harman Kardon Go + Play unit before plugging  
the device into the wall or AC power outlet.
fcc.regulations
FCC.Statement.and.Warning
This.device.complies.with.Part.15.of.the.FCC.Rules..Operation.is.subject.to.the.following.two.conditions:
1).This.device.may.not.cause.interference.
2).This.device.must.accept.interference,.including.interference.that.may.cause.undesired.operation.of.the.device.
IC.Statement.and.Warning
Operation.is.subject.to.the.following.two.conditions:
1).This.device.may.not.cause.interference.
2).This.device.must.accept.interference,.including.interference.that.may.cause.undesired.operation.of.the.device.
MODIFICATIONS.NOT.EXPRESSLY.APPROVED.BY.THE.MANUFACTURER.COULD.VOID.THE.USER.AUTHORITY.TO.OPERATE.THE.EQUIPMENT.UNDER.FCC.RULES.
Harman Kardon
Go + Play 5V service manual
Page 4 of 15
Page of 17
Display

Download Harman Kardon GO AND PLAY 5V Service Manual (Repair Manual)

Here you can view online or download Harman Kardon GO AND PLAY 5V Service Manual in pdf. This Service Manual can help you recover, restore, fix, disassemble and repair Harman Kardon GO AND PLAY 5V Audio. Information contained in Harman Kardon GO AND PLAY 5V service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).