Sony DCR-PC1000 / DCR-PC1000E (serv.man4) Service Manual ▷ View online
6-2
DCR-PC1000/PC1000E
Replaced parts
Block replacement
Parts replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z z
z
z z
z
z
z
z z
z
z
z
z z
z
z z
z z
z
z
z
z z
z
z z
z
z z
Lens de
vice
Mechanism deck Note1
LCD block
LCD901 (LCD panel, touch panel)
LCD block
LED901 (Backlight)
EVF block
LCD902 (LCD panel)
EVF block
LED902 (Backlight module)
Flash unit
(FL11800)
Mechanism deck M9001 (Drum assy) Note1
Mechanism MD block
CD-569
board
IC2001, 2002, 2003
(CMOS image sensor)
FR-229 board
SE4001/4002 (PITCH /Y
A
W
sensor)
PD-252 board
IC7501
(RGB dr
iv
er
, T
iming gener
ator (LCD))
VC-398 board
IC3502 (A/D con
v.
)
VC-398 board
X3901 (X’T
AL OSC.)
VC-398 board
IC4001 (D
V signal process, etc.)
VC-398 board
IC4201
(D
V signal process,RF signal pr
ocess)
VC-398 board
IC4301 (REC/PB
AMP)
VC-398 board
IC4401 (V
ideo/audio IN/OUT)
VC-398 board
IC4701 (16:9 wide process)
VC-398 board
IC7001
(RGB dr
iv
er
, T
iming gener
ator (EVF))
Adjustment
Section
Initialization of
EEPROM data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Initialization of A, B, D, 1A, 1B page data
Initialization of 8, C, 18, 1C page data
Initialization of 63 to 6F page data
Initialization of 63 to 6F page data
Origin oscillation check
HALL adj.
MR adj.
MR adj.
Image sensor output 2ch matching adj.
Flange back adj.
Mechanical shutter adj.
Mechanical shutter adj.
AWB standard data input
LV standard data input
Auto white balance adj.
Auto white balance adj.
PCGM standard data input
Color reproduction adj.
MAX GAIN adj.
MAX GAIN adj.
White defect adjustment
Black defect adjustment
Steady shot check
Steady shot check
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
EVF automatic adj.
White balance adj.
LCD automatic adj.
V COM adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Touch panel adj.
Touch panel adj.
Tape path adj.
Serial No. input
CAP FG duty adj.
CAP FG duty adj.
Switching position adj.
Error rate check
IC4701 LINE OUT Y level adj.
IC4701 LINE OUT Y level adj.
IC4701 LINE OUT chroma level adj.
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
S VIDEO OUT chroma level adj.
IC4701 automatic adj.
1-1. Adjusting items when replacing main parts and boards.
• Adjusting items when replacing main parts
When replacing main parts, adjust the items indicated by z in the following table.
When replacing main parts, adjust the items indicated by z in the following table.
Note1: When replacing the drum assy. or the mechanism deck, reset the data of page: 7, address: A8 to AB to “00”. (Refer to “Record of Use check” of “6-
4. SERVICE MODE”)
Table. 6-1-1(1).
6-3
DCR-PC1000/PC1000E
CD-569 board (COMPLETE)
FR-229 board (COMPLETE)
PD-252 board (COMPLETE)
VC-398 board (COMPLETE)
VC-398 boar
d IC5302 (EEPR
OM)
VC-398 boar
d IC5102 (EEPR
OM)
Supporting
Board
EEPROM
replacement
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
• Adjusting items when replacing a board or EEPROM
When replacing a board or EFPROM, adjust the items indicated by z in the following table.
When replacing a board or EFPROM, adjust the items indicated by z in the following table.
Note2: When the repair is finished,
confirm the following items.
1. Shoot the all black subject
1. Shoot the all black subject
(Attach the lens cap and
shoot), and confirm that a
vertical line is not displayed
in the center of the screen, and
that there is no difference in
left-right brightness level of
the screen.
shoot), and confirm that a
vertical line is not displayed
in the center of the screen, and
that there is no difference in
left-right brightness level of
the screen.
2. Shoot a subject of low light,
and confirm that a vertical line
is not displayed in the center
of the screen, and that there is
no difference in left-right
brightness level of the screen.
is not displayed in the center
of the screen, and that there is
no difference in left-right
brightness level of the screen.
3. Shoot a subject of normal
light, and confirm that a
vertical line is not displayed
in the center of the screen, and
that there is no difference in
left-right brightness level of
the screen.
vertical line is not displayed
in the center of the screen, and
that there is no difference in
left-right brightness level of
the screen.
When the above symptom
occurs, perform “Image Sensor
Output 2ch Matching Adjust-
ment”.
occurs, perform “Image Sensor
Output 2ch Matching Adjust-
ment”.
Table. 6-1-1(2).
Adjustment
Section
Initialization of
EEPROM data
EEPROM data
Camera
Color EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Initialization of A, B, D, 1A, 1B page data
Initialization of 8, C, 18, 1C page data
Initialization of 63 to 6F page data
Origin oscillation check
Origin oscillation check
HALL adj.
MR adj.
Image sensor output 2ch matching adj.
Image sensor output 2ch matching adj.
Flange back adj.
Mechanical shutter adj.
AWB standard data input
AWB standard data input
LV standard data input
Auto white balance adj.
PCGM standard data input
PCGM standard data input
Color reproduction adj.
MAX GAIN adj.
White defect adjustment
White defect adjustment
Black defect adjustment
Steady shot check
Strobe light level adj.
Strobe light level adj.
Strobe white balance adj.
EVF automatic adj.
White balance adj.
White balance adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Touch panel adj.
Tape path adj.
Tape path adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Switching position adj.
Error rate check
IC4701 LINE OUT Y level adj.
IC4701 LINE OUT chroma level adj.
IC4701 LINE OUT chroma level adj.
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
IC4701 automatic adj.
IC4701 automatic adj.
6-4
DCR-PC1000/PC1000E
6-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vector scope
Fig. 6-1-1.
J-1
J-2
J-3
Filter for color
temperature
correction (C14)
J-6080-058-A
temperature
correction (C14)
J-6080-058-A
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
Pattern box PTB-450
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
J-6082-200-A
or
Pattern box PTB-1450
J-6082-557-A
Color chart for
pattern box
pattern box
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
Siemens star chart
J-6080-875-A
J-6080-875-A
Clear chart for
pattern box
pattern box
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
Mini pattern box
J-6082-353-B
J-6082-353-B
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
commander
(RM-95 upgraded)
J-6082-053-B
Camera table
J-6082-384-A
J-6082-384-A
Backgorund
paper
J-2501-130-A
paper
J-2501-130-A
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
J-12
A: CPC-15
J-6082-564-A
J-6082-564-A
B: I/F unit for
LANC control
J-6082-521-A
LANC control
J-6082-521-A
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
A
B
6-5
DCR-PC1000/PC1000E
1-1-2.
Preparations
Note1: For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
Note2: When performing only the adjustments, the lens block and boards
need not be disassembled.
Note3: Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-3.
Note4: As removing the front assembly (removing the VC-398 board
CN1001) means removing the lithium 3V power supply (FP-165
flexible, BT001), data such as date, time, user-set menus will be
lost. After completing adjustments, reset these data.
But, the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the front assembly
has been removed. (Refer to “6-4.Service Mode” for the data on
the history use and the self-diagnosis data.)
flexible, BT001), data such as date, time, user-set menus will be
lost. After completing adjustments, reset these data.
But, the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the front assembly
has been removed. (Refer to “6-4.Service Mode” for the data on
the history use and the self-diagnosis data.)
Note5: Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 10, set data: 01, and press the PAUSE
2) Select page: A, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control switch block (PS11800) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
on with the control switch block (PS11800) removed. After
completing adjustments, be sure to exit the “Forced Camera Power
ON Mode”.
Note6: Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 10, set data: 00, and press the PAUSE
2) Select page: A, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Fig. 6-1-2.
Pattern box
1.5 m
Front of the lens
0.4 m (PTB-1450)
1.0 m (PTB-450)
1.0 m (PTB-450)
Click on the first or last page to see other DCR-PC1000 / DCR-PC1000E (serv.man4) service manuals if exist.