DOWNLOAD Sony DCR-HC94E / DCR-HC96 / DCR-HC96E (serv.man4) Service Manual ↓ Size: 1.07 MB | Pages: 79 in PDF or view online for FREE

6-27

DCR-HC94E/HC96/HC96E_ADJ

Perform this adjustment after performing “Flange Back Adjust-
ment (1)”.

Subject

Subject more than 500 m away
(Subject wite clear contrast such as
buildings, etc.)

Measurement Point

Adjusting remote commander

Measuring Instrument

Adjustment Page

F

Adjustment Address

11, 48 to 58, 6D

Specified Value

Data of page: 6, address: 0C is “00”

Note 1: Perform the adjustment with the lens in horizontal state.
Note 2: Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Note 4: Don’t touch the zoom lever during adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3
4) COLOR SLOW S (Menu setting) ................................... OFF

Preparations before adjustments:
1) Set the zoom lens to the TELE end and expose a rsubject that

is more than 500 m away.
(subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the
screen)

Order Page Address Data

Procedure

1

0

01

01

2

6

01

13

Press PAUSE (Write) button.

3

Place ND filter on the lens so
that the optimum image is
obtain.

4

6

01

29

Press PAUSE (Write) button.
(Note 5)

5

6

02

Check the data changes to “01”.

6

6

0C

Check the data is “00”.

Note 5: The adjustment data will be automatically input to page:

F, adress: 11, 48 to 58 nd 6D.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

6

01

25

Press PAUSE (Write) button.

3

6

02

Check the data changes to
“01”.

4

6

01

00

Press PAUSE (Write) button.

5

6

01

00

6

Perform “Flange Back
Check”.

6-28

DCR-HC94E/HC96/HC96E_ADJ

Subject

Siemens star
(2.0 m from the front of the lens)
(Luminance: approx. 200 lux)

Measurement Point

Check operation on monitor TV

Measuring Instrument

Specified value

Focused at the TELE end and WIDE
end

Note 1: Check that the data of page: 0, address: 10 is “00”.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHSHOT ..................................................................... OFF
3) WIDE SELECT .................................................................. 4:3

Note 2: When the auto focus is ON, the lens can be checked if it

is focused or not by observing the data on the page: 1 of
the adjusting remote commander.

1 : 00 : XX

Odd: Focused
Even: Unfocused

Preparations before adjustments:
1) Place the Siemens star 2.0 m from the front of the lens.
2) To open the IRIS, decrease the luminous intensity to the Si-

emens star up to a point before noise appear on the image.

Order Page Address Data

Procedure

1

6

40

01

2

6

41

01

3

Shoot the Siemens star with
the zoom TELE end.

4

Turn on the auto focus.

5

0

03

0F

6

1

Check that the lens is
focused. (Note 2)

7

6

21

10

8

Shoot the Siemens star with
the zoom WIDE end.

9

Observe the TV monitor and
check that the lens is
focused.

Order Page Address Data

Procedure

1

6

21

00

2

6

40

00

3

6

41

00

4

0

03

00

Subject

Flange back adjustment jig
(Luminance: approx. 200 lux)

Measurement Point

Check operation on monitor

Measuring Instrument

Specified Value

Focused at the TELE end and WIDE
end

Note: Check that the data of page: 0, address: 10 is “00”.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3

Preparations before adjustments:
1) Install the flange back adjustment jig so that the distance be-

tween it and the front of lens of camra is less than 3 cm.

2) To open the IRIS, decrease the liminous intensity to the chart

of the flange back adjustment jig up to a point before noise
appesr on the image. (approx. 200 lux)

3) Check that the center of chart meets the center of shot image

screen with the zoom lens at TELE end and WIDE end respec-
tively.

Order Page Address Data

Procedure

1

6

40

01

2

6

41

01

3

Shoot the chart with the
zoom TELE end.

4

6

2C

02

5

Check that the lens is
focused.

6

Shoot the chart with the
zoom WIDE end.

7

Check that the lens is
focused.

Order Page Address Data

Procedure

1

6

2C

00

2

6

40

00

3

6

41

00

6-29

DCR-HC94E/HC96/HC96E_ADJ

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

6

90

00

3

6

91

00

4

6

92

00

5

6

93

00

Subject

Color bar chart
(Color reproduction adjustment
frame)
(1 m (PTB-450) or 40 cm (PTB-
1450) from the front of lens)

Measurement Point

Video terminal of A/V jack (or A/V
OUT jack) (75 

Ω terminated)

Measuring Instrument

Oscilloscope and monitor TV

Specified Value

A = B, C = D, E = F

Note 1: Perform “Hall Adjustment” and “Flange Back Adjust-

ment” before this adjustment.

Note 2: Check that the data of page: 0, address: 10 is “00”.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu Setting) ......................................... MANUAL

Order

Procedure

1

Adjust the zoom and the camera direction, and set
the specified position.

2

Mark the position of the picture frame on the monitor
TV, and adjust the picture frame to the this position
in following adjustment using “Color reproduction
adjustment frame”.

Order Page Address Data

Procedure

1

0

03

18

2

1

Read XH data and XL data.
(Note 3)

3

0

03

22

4

1

Read YH data and YL data.
(Note 3)

Note 3: The right four digits of the page: 1 displayed data of the

adjusting remote commander.

1:XX : XX

XL or YL data
XH or YH data

How to reset the zoom and focus when they deviated:
If the zoom and focus deviated due to some reason, reset them in
the following method.

Order Page Address Data

Procedure

1

6

90

XL

2

6

91

XH

3

6

92

YL

4

6

93

YH

5

6

01

79

Press PAUSE (Write) button.

E=F

V

E

F

Color bar chart picture frame

Monitor TV picture frame

A=B

C=D

A

B

C

D

6-30

DCR-HC94E/HC96/HC96E_ADJ

Order Page Address Data

Procedure

1

0

01

01

2

6

01

D5

Press PAUSE (Write) button.

3

6

01

D7

Press PAUSE (Write) button.
(Note 6)

4

0

03

33

5

6

02

Check the data changes to
“01”.

6

1

Check that bit15 of the
display data (Note 4) is “1”.
(Note 7)

Note 6: The adjustment data will be automatically input to page:

14, address: 98 to 9F, A8 to B7.

Note 7: When bit15 of the display data is “1”, the display data is

“8000” to “FFFF”.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

03

00

3

6

01

00

Compensate the mixed colors of the CCD color filters so that proper
color reproduction is produced.

Subject

Mixed color compensation chart
(Color reproduction adjustment
frame)

Measurement Point

Displayed data of page: 1 (Note 4)

Measuring Instrument

Adjusting remote commander

Adjustment Page

14 (Note 2)

Adjustment Address

98 to 9F, A8 to B7

Specified value

bit15 is “1”

Note 1: Perform “CCD Output 2ch Matching Adjustment” be-

fore this adjustment.

Note 2: If reading/writing data on pages 14, set data: 01 to page:

0, address: 10, and then select pages: 4. By this data set-
ting, the pages 14 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 3: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Note 4: The right four digits of the page: 1 displayed data of the

adjusting remote commander.

1:XX:XX

Displayed data

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3
4) DIGITAL ZOOM (Menu setting) .................................... OFF
5) STEADY SHOT (Menu setting) ..................................... OFF
6) FOCUS (Menu setting) .......................................... MANUAL

Picture frame setting
1) Perform “9. Picture Frame Setting (Color reproduction adjust-

ment frame)”.

2) Remove the color bar chart form the pattern box and insert the

mixed color compensation chart in its place.
Note 5: Insert the mixed color compensation chart to direc-

tion of the following figure.

Magenta

Red

Blue

White