DOWNLOAD Sony DCR-HC94E / DCR-HC96 / DCR-HC96E (serv.man4) Service Manual ↓ Size: 1.07 MB | Pages: 79 in PDF or view online for FREE

6-23

DCR-HC94E/HC96/HC96E_ADJ

The inner focus lens MR adjustment is carried out automatically.
In whichever case, the focus will be deviated during auto focus-
ing/manual focusing.

Subject

Not required

Measurement Point

Adjusting remote commander

Measuring Instrument

Adjustment Page

F

Adjustment Address

58, 5A to 65

Specified value

Data of page: 6, address: 0C is “00”.

Note 1: Perform the adjustment with the lens in horizontal state.
Note 2: Perform “Flange Back Adjustment” after this adjustment.
Note 3: Check that the data of page: 0, address: 10 is “00”.
Note 4: Check that the data of page: 6, address: 02 is “00”.

If not, select page: 6, address: 01, set data: 00, and press
the PAUSE (Write) button.

Switch setting
1) POWER CAMERA-TAPE mode

Order Page Address Data

Procedure

1

0

01

01

2

6

01

BD

Press PAUSE (Write) button.
(Note 5)

3

6

02

Check the data changes to
“01”.

4

6

0C

Check the data is “00”.

Note 5: The adjustment data will be automatically input to page:

F, address: 58, 5A to 65.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

6

01

25

Press PAUSE (Write) button.

3

6

02

Check the data changes to
“01”.

4

6

01

00

Press PAUSE (Write) button.

5

0

01

00

6-24

DCR-HC94E/HC96/HC96E_ADJ

Correct the dispersion of between the left-right channels of CCD
imager.

Subject

Clear chart (All white) (Note 1)

Adjustment Page

19 (Note 3)

Adjustment Address

00 to 11

Note 1: Shoot the clear chart with the zoom TELE end.
Note 2: Peform “CCD Output 2ch Matching Adjustment (1)”

before this adjustment.

Note 3: If reading/writing data on pages 19, set data: 01 to page:

0, address: 10, and then select pages: 9. By this data set-
ting, the pages 19 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 4: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) ZOOM ..................................................................... TELE end
4) STEADY SHOT (Menu setting) ..................................... OFF
5) Focus (Menu setting) ............................................. MANUAL

Order Page Address Data

Procedure

1

0

01

01

2

6

01

F5

Press PAUSE (Write) button.
(Note 5)

3

6

02

Check the data changes to
“01” .

Note 5: The adjustment data will be automatically input to page:

19, address: 00 to 11.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

01

00

Correct the dispersion of black level between the left-right chan-
nels of CCD imager.

Subject

Not required

Adjustment Page

19 (Note 3)

Adjustment Address

14 to 1F

Note 1: Perform “HALL Adjustment” before this adjustment.
Note 2: Perform “CCD Output 2ch Matching Adjustment (2)”,

“Flange Back Adjustment” and “Color Reproduction Ad-
justment” after this adjustment.

Note 3: If reading/writing data on pages 19, set data: 01 to page:

0, address: 10, and then select pages: 9. By this data set-
ting, the pages 19 can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.

Note 4: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF

Order Page Address Data

Procedure

1

0

01

01

2

6

01

F3

Press PAUSE (Write) button.
(Note 5)

3

6

02

Check the data changes to
“01” .

Note 5: The adjustment data will be automatically input to page:

19, address: 14 to 1F.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

0

01

00

6-25

DCR-HC94E/HC96/HC96E_ADJ

Order Page Address Data

Procedure

6

0

01

00

7

Perform “Flange Back
Check”.

Preparation (Using the minipattern box)
1) The minipattern box is installed as shown in the following fig-

ure.
Note 9: The attachment lenses are not used.

2) Install the minipattern box so that the distance between it and

the front of lens of camera is less than 3 cm.

3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the

specified voltage 

± 0.01 Vdc.

5) Check that the center of Siemens star chart meets the center of

shot image screen with the zoom lens at TELE end and WIDE
end respectively.

Specified voltage: The specified voltage varies according to the

minipattern box, so adjustment the power sup-
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the mini-
pattern box.

Preparation (Using the flange back adjustment jig)
(Luminance: about 300 lux)
1) Install the flange back adjustment jig so that the distance be-

tween it and the front of lens of camera is less than 3 cm.

2) Make the height of flange back adjustment jig and the camera

equal.

3) Check that the center of chart meets the center of shot image

screen with the zoom lens at TELE end and WIDE end respec-
tively.

The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.

Subject

Siemens star chart with ND filter for
minipattern box (Note 1) or flange
back adjustment jig

Measurement Point

Adjusting remote commander

Measuring Instrument

Adjustment Page

F

Adjustment Address

11, 48 to 58, 6D

Specified value

Data of pege: 6, address: 0C is “00”

Note 1: Dark Siemens star chart.
Note 2: Perform “HALL Adjustment”,“MR Adjustment” and

“CCD Output 2ch Matching Adjustment”before this ad-
justment.

Note 3: Perform the adjustment with the lens in horizontal state.
Note 4: Check that the data of page: 0, address: 10 is “00”.
Note 5: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Note 6: Don’t touch the zoom lever during adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3
4) COLOR SLOW S (Menu setting) ................................... OFF

Order Page Address Data

Procedure

1

0

01

01

2

E

FD

Set the bit value of bit4 is
“1”, and press PAUSE
(Write) button. (Note 7)

3

6

01

13

Press PAUSE (Write) button.

4

6

01

27

Press PAUSE (Write) button.
(Note 8)

5

6

02

Check the data changes to “01”.

6

6

0C

Check the data is “00”.

Note 7: For the bit values, refer to “6-4. SERVICE MODE”, “4-

4. 3. Bit value discrimination”.

Note 8: The adjustment data will be automatically input to page:

F, address: 11, 48 to 58 and 6D.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

6

01

25

Press PAUSE (Write) button.

3

6

02

Check the data changes to
“01”.

4

6

01

00

Press PAUSE (Write) button.

5

E

FD

Set the bit value of bit4 is
“0”, and press PAUSE
(Write) button. (Note 7)

Minipattern box

Below 3 cm

Camera

Red (+)

Black (–)

Yellow (SENS +)

White (SENS –)

Black (GND)

Need not connected

Regulated power supply

Output voltage : Specified voltage 

± 0.01 Vdc

Output current : more than 3.5 A

Flange back adjustment jig

Below 3 cm

Camera

6-26

DCR-HC94E/HC96/HC96E_ADJ

Order Page Address Data

Procedure

1

0

01

01

2

E

FD

Set the bit value of bit4 is
“1”, and press PAUSE
(Write) button. (Note 6)

3

6

01

13

Press PAUSE (Write) button.

4

6

01

15

Press PAUSE (Write) button.
(Note 7)

5

6

02

Check the data changes to
“01”.

6

6

0C

Check the data is “00”.

Note 6: For the bit values, refer to “6-4. SERVICE MODE”, “4-

4.3. Bit value discrimination”.

Note 7: The adjustment data will be automatically input to page:

F, address: 11, 48 to 58 and 6D.

Order Page Address Data

Procedure

1

6

01

00

Press PAUSE (Write) button.

2

6

01

25

Press PAUSE (Write) button.

3

6

02

Check the data changes to
“01”.

4

6

01

00

Press PAUSE (Write) button.

5

E

FD

Set the bit value of bit4 is
“0”, and press PAUSE
(Write) button. (Note 6)

6

0

01

00

7

Perform “Flange Back
Adjustment (2)”.

The inner focus lens flange back adjustment is carried out auto-
matically. In whichever case, the focus will be deviated during
auto focusing/manual focusing.

Subject

Flange back adjustment chart
(2.0 m from the front of lens)
(Luminance: 300 to 400 lux)

Measurement Point

Adjusting remote commander

Measuring Instrument

Adjustment Page

F

Adjustment Address

11, 48 to 58, 6D

Specified value

Data of page: 6, address: 0C is“00”

Note 1: Perform “HALL Adjustment”,“MR Adjustment” and

“CCD Output 2ch Matching Adjustment”before this ad-
justment.

Note 2: Perform the adjustment with the lens in horizontal state.
Note 3: Check that the data of page: 0, address: 10 is “00”.
Note 4: Check that the data of page: 6, address: 02 is “00”. If

not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.

Note 5: Don’t touch the zoom lever during adjustment.

Switch setting
1) POWER ............................................. CAMERA-TAPE mode
2) NIGHTSHOT ................................................................... OFF
3) WIDE SELECT .................................................................. 4:3
4) COLOR SLOW S (Menu setting) ................................... OFF

Preparations before adjustments:
1) Check that the center of Flange back adjustment chart meets

the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.