DOWNLOAD Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ↓ Size: 1.04 MB | Pages: 66 in PDF or view online for FREE

6-35

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

4) If the [End] button is clicked, the following screen is displayed

during the execution of “4. Transmissive Mode White Balance
Adj.”. Check that the LCD screen is not colored. If colored,
using the [Up]/[Down] button on the screen, adjust so that the
LCD screen is not colored. After the adjustment, click the [End]
button in the screen.

5) If the [End] button is clicked, “5. Reflective Mode White Bal-

ance Adj.” will be executed.

6) Upon successful completion of all item the LCD Adjustment,

the following message is displayed. Click the [OK] button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD/EVF Adj.
2. LCD Automatic Adj.

(VCO Adj., Contrast Adj.)

3. V-COM Adj.
4. Transmissive Mode White Balance Adj.
5. Reflective Mode White Balance Adj.

[Adjusting method]
1) Click the [Start] button of the LCD Adjustment.
2) The Automatic Adjustment Program executes the “1. Data

Setting during LCD/EVF Adj.” and “2. LCD Automatic Adj.”.

3) After that, the following screen is displayed during the execu-

tion of “3. V-COM Adj.”. Using the [Up]/[Down] button on the
screen, adjust so that the brightness of portions A and B on the
LCD panel is equal. After the adjustment, click the [End] but-
ton in the screen.

6-36

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

[Automatic Adjustment Program execution items and
sequence]
1. Touch Panel Adj.

[Adjusting method]
1) Click the [Start] button of the Touch Panel Adjustment.
2) The Automatic Adjustment Program executes the “1. Touch

Panel Adj.1”. The following message is displayed, and then
adjust the LCD screen in accordance with the instructions given
on the screen. After the adjustment, click the [OK] button in
the message window.

3) Upon successful completion of all item the Touch Panel Ad-

justment, the following message is displayed. Click the [OK]
button.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during LCD/EVF Adj.
2. EVF Automatic Adj.

(VCO Adj., Contrast Adj.)

3. White Balance Adj.

[Adjusting method]
1) Click the [Start] button of the EVF Adjustment.
2) The Automatic Adjustment Program executes the “1. Data

Setting during LCD/EVF Adj.” and “2. EVF Automatic Adj.”.

3) After that, the following screen is displayed during the execu-

tion of “3. White Balance Adj.”. Check that the EVF screen is
not colored. If colored, using the [Up]/[Down] button on the
screen, adjust so that the EVF screen is not colored. After the
adjustment, click the [End] button in the screen.

4) Upon successful completion of all item the EVF Adjustment,

the following message is displayed. Click the [OK] button.

6-37

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

Click the [AUDIO SYSTEM ADJUSTMENT] button on the Main Menu
screen, and the “AUDIO SYSTEM ADJUSTMENT” screen in Fig.
6-1-18 will appear.

1

[To Menu] button
Return to the main menu.

2

[Preparation] button
Notes for adjustment or jigs used are displayed.

3

[Start] button
“Audio Adjustment” starts.

4

[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”.
When the data setting is cancelled, the button color returns to
“white”. (Use this button when an error occurred in the audio
adjustment. If the adjustment completed successfully, the data
setting is automatically cancelled and the button color returns
to “white”.)

The adjustment items of audio system adjustment are as listed in
Table 6-1-8. The Automatic Adjustment Program executes the ad-
justment items when the AUDIO Adjustment Start button is clicked.

4

3

2

1

AUDIO
Adjustment

Internal 3ch Microphone Sensitivity Adj.

10

60

0104 to 013F

6-38

DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ

Perform “AUDIO Adjustment” without inserting disc.

AUDIO Adjustment is available only once after the power
is turned on. If the adjustment is retried, turn off the power
and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during AUDIO Adj.
2. Internal 3ch microphone Adj.
3. Release of Data Setting during Audio Adj.

[Preparation]
Prepare an amplifier built-in speaker for PC and arrange it above
the internal 3ch microphone of the camcoder.
• Adjust the speaker position so that it is within ±3 cm from the

center of camcoder internal 3ch microphone at the height of 40
cm.

• The diaphragm of speaker position should be set face down to-

ward the internal 3ch microphone.

• The speaker may be held by hand if it is hard to secure.

[Adjusting method]
1) Play back the adjustment sound source file on the PC.
2) Set the speaker volume so that the adjustment signal sound is

heard to the extent of the loudness of talking voices.

3) Click the [Start] button of the AUDIO Adjustment.
4) The Automatic Adjustment Program executes “1. Data Setting

during Audio Adj.”.

5) When “1. Data Setting during Audio Adj.” completed success-

fully, and the items “2. Internal 3ch microphone Adj.” and “3.
Release of Data Setting during Audio Adj.” will be executed.

6) Upon successful completion of all items of the AUDIO Ad-

justment, the following message is displayed. Click the [OK]
button.

In case of adjustment NG, reduce or increase the speaker volume,
and then retry adjustment.
If the Adjustment Program displays a message “Volume too loud”
or “Volume too low”, adjust the speaker volume following the
message.

Amplifier built-in 
speaker for PC

PC

Internal 3ch 
microphone

about 40 cm