Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ▷ View online
6-43
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
Name
DVD-R Disc
for Self Jitter
for Self Jitter
DVD-RW
Reference + DOW
Disc
Reference + DOW
Disc
DVD+RDL
Self Disc
Self Disc
Use
Diagnosis and adjustment of DVD-R
Diagnosis and adjustment of DVD-RW
Diagnosis and adjustment of DVD+RDL
Remark
This disc can be used about 78 times (min. 22 times) for the
diagnosis and adjustment. (Note 3)
diagnosis and adjustment. (Note 3)
This disc can be used about 1174 times for the diagnosis and
adjustment. (Note 3)
adjustment. (Note 3)
This disc can be used about 38 times (min. 9 times) for the
diagnosis and adjustment. (Note 3)
diagnosis and adjustment. (Note 3)
Table 6-2-1
Note 3:
If the use counts of the DVD-R Disc for Self Jitter, DVD-RW Reference + DOW Disc, or DVD+RDL Disc for Self Jitter exceed
respective limits, the following message will be displayed. Replace it with a new disc and click the [OK] button in the message
window.
window.
The disc use counts are saved in the PC. Accordingly, the disc used for diagnosis and adjustment, PC and drive adjustment
program (AUDIT for 2008) must always be controlled in the same combination.
If the disc is used with another PC or other versions (AUDIT for Service, AUDIT for UX1, etc.), the diagnosis and adjustment
will fail and that disc will no longer be able to use.
For reference (Note 3 in Japanese)
Fig. 6-2-5
2-1-4.
Alignment disc
To diagnose and adjust the drive block, the discs listed in the following table are used.
Note 1:
Use the specified disc that matches each diagnostic and adjustment item. (A message is displayed by the AUDIT)
If a wrong disc is used, the disc could be destroyed and could not be reused.
If a wrong disc is used, the disc could be destroyed and could not be reused.
Note 2:
Handle the disc with care, and before use, check if the disc is scratched or dirty.
注3：DVD-R セルフジッターディスク，DVD-RWリファレンス+ DOWディスクとDVD+RDLセルフジッターディスクは，使
用限度を超えると次のメッセージが表示されます。新しいディスクと交換して，メッセージの[OK]ボタンをクリックし
てください。
ディスクの使用回数は，PC内部に保存されます。このため，診断・調整で使用するディスクとPCおよびドライブ調整
プログラム（AUDIT for 2008）の組み合わせには制限があります。（2-1-5．Unigue disc IDを参照）
別のPCや他のバージョン（AUDIT for Service，AUDIT for UX1等）でディスクを使用すると，診断・調整が正常に行わ
れずNGとなってしまい，そのディスクが使用不可能になってしまう場合があります。
6-44
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
2-1-5.
Unique disc ID (For all kind, DVD-RW, DVD-R, DVD+RDL)
Unique disc ID will be written on the disc which is used first time for AUDIT for 2008.
At the same time, same disc ID will be stored in the install folder of AUDIT for 2008.
AUDIT is checking whether these ID is same or not. Thus, the PC and the adj disc must be managed together.
In fact, adjustment discs can not be swapped between the PC which AUDIT for 2008 is installed each other.
At the same time, same disc ID will be stored in the install folder of AUDIT for 2008.
AUDIT is checking whether these ID is same or not. Thus, the PC and the adj disc must be managed together.
In fact, adjustment discs can not be swapped between the PC which AUDIT for 2008 is installed each other.
The disk which ID is not storeed is considered as new disc (not recorded at all).
When you use the disc used halfway, it might be possible cause of some error.
When you use the disc used halfway, it might be possible cause of some error.
1.
Disc shareing between the previous AUDIT and AUDIT for 2008
It is able to use on previous AUDIT but it is unable to use on AUDIT for
2008 again. Due to address mismatch of file management.
Unable to share
(AUDIT 2008 detect the disc as new one due to missing disc ID.)
DVD-R
Able to share
Start using disc first time is previous AUDIT
Able to share
DVD-RW
Start using disc first time is AUDIT for 2008
DVD+RDL
It is able to use on previous AUDIT but it is unable to use on AUDIT for
2008 again. Due to address mismatch of file management.
Unable to share
AUDIT 2008 detect the disc as new one due to missing disc ID.
All discs
Unable to share
(Each PC has deferent disc information)
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
AUDIT for 2008
previous AUDIT
OK
OK
OK
OK
OK
AUDIT for 2008
AUDIT for 2008
PC1
PC2
OK
2.
Disc shareing between the PC which is installed AUDIT for 2008
6-45
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
2-1-6.
Installation method for “Audit for 2008”
Support environment: Windows 2000 SP4 or later, Windows XP SP2 or later
(.NET Framework which used in this program may not be installed on previous version of Windows.)
(.NET Framework which used in this program may not be installed on previous version of Windows.)
“Audit for 2008” supports all functions of “Audit for 2007”.
It is not necessary to use “Audit for 2007” any more.
Disc set for adjustment which used on “Audit for 2007” can be used on “Audit for 2008” if they aren't used on other PCs before installing
“Audit for 2008”.
It is not necessary to use “Audit for 2007” any more.
Disc set for adjustment which used on “Audit for 2007” can be used on “Audit for 2008” if they aren't used on other PCs before installing
“Audit for 2008”.
1) Uninstall “Audit for 2007”.
Control Panel
→ Add or Remove Programs
2) Uninstall “Audit for 2008” (If it is already installed).
Control Panel
→ Add or Remove Programs
3) Install .NET Framework 2.0 (only for the first time installation).
Download “dotnetfx.exe” as suitable for your PC environment from Microsoft Web site and install it.
(We confirmed normal operation just on .NET Framework 2.0.
Therefore, we can not guarantee on the other version (over ver. 3.0) of .NET Framework.)
(We confirmed normal operation just on .NET Framework 2.0.
Therefore, we can not guarantee on the other version (over ver. 3.0) of .NET Framework.)
4) Install “Audit for 2008”.
Double click Auditfor2008.exe and follow installer.
Note:
If it is first time to install .NET Framework 2.0, we recommend to check the security patch by Windows Update, etc. and to install
if necessary.
if necessary.
Perform just step 2 and 4 from second installation.
Ver. 1.1 2008.01
6-46
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
2-2.
AUDIT (Drive Adjustment Program)
2-2-1.
AUDIT Starting Method
Click the [Start] button on the task bar, and from the [Programs], click [AUDIT for Service] – [AUDIT for 2008], and the AUDIT will start. The
SeusEX starts simultaneously with the start of AUDIT, and the operation screen appears only for a moment.
Again, the SeusEX starts and the operation screen is displayed, and after it is minimized for display at the lower left of the desktop, the
AUDIT operation screen appears. If the SeusEX cannot start (because, for instance, the HASP key is not connected to the PC), the AUDIT
also does not start.
SeusEX starts simultaneously with the start of AUDIT, and the operation screen appears only for a moment.
Again, the SeusEX starts and the operation screen is displayed, and after it is minimized for display at the lower left of the desktop, the
AUDIT operation screen appears. If the SeusEX cannot start (because, for instance, the HASP key is not connected to the PC), the AUDIT
also does not start.
2-2-2.
Description of Screen
Fig. 6-2-6
1. Diagnosis section
2. Adjustment section
3. Comment display section
4. Status display section
6.
[SET]
button
7. Menu section
5.
[STOP]
button
8. Caution display
section
Ver. 1.1 2008.01
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.