Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ▷ View online
6-47
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
1.
Diagnosis section
Use these buttons when diagnosing the drive block.
2.
Adjustment section
Use these buttons when adjusting the drive block.
3.
Comment display section
At the execution of diagnosis and adjustment, its progress situa-
tion is displayed.
1) [Clear] button
tion is displayed.
1) [Clear] button
This button clears the comment in the display section.
2) [LOG] button
This button saves the comment in the display section as a log
file.
file.
Fig. 6-2-7
4.
Status display section
The result of diagnosis and adjustment is displayed.
Fig. 6-2-8
5.
[STOP]
button
This button stops the diagnosis and adjustment in the midway.
6.
[SET]
button (After completing the TEST)
This button cancels the TEST mode set to the cam coder during
the diagnosis and adjustment. If the TEST mode is cancelled suc-
cessfully, the following message is displayed.
the diagnosis and adjustment. If the TEST mode is cancelled suc-
cessfully, the following message is displayed.
Note:
Before exiting the AUDIT, be sure to cancel the TEST mode
by clicking the SET button of “After completing the TEST”.
Unless the TEST mode is cancelled, the drive may not op-
erate normally, such that “disc cover does not open”, “drive
error is displayed”, etc..
by clicking the SET button of “After completing the TEST”.
Unless the TEST mode is cancelled, the drive may not op-
erate normally, such that “disc cover does not open”, “drive
error is displayed”, etc..
Fig. 6-2-9
7.
Menu section
1) [RESET] button
This button resets internal register.
(Use this button to interrupt the work so far when diagnosis
and adjustment stopped and no response is returned. The work
terminates with the previous adjustment data written to the
camcoder.)
(Use this button to interrupt the work so far when diagnosis
and adjustment stopped and no response is returned. The work
terminates with the previous adjustment data written to the
camcoder.)
2) [Lid Open] button
This button opens the disc cover.
8.
Caution display section
At the execution of POWER Adjustment, the caution of POWER
Adjustment is displayed.
Adjustment is displayed.
Fig. 6-2-10
[Clear]
button
[LOG]
button
6-48
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
Order
Diagnostic item
Message
Disc
Operation
1
No Disc
Click the
[START]
button of “DIAGNOSIS”.
2
No Disc
Check the movement of the pickup lens (Focus
direction/Tracking direction), and click the
direction/Tracking direction), and click the
[OK]
button in the message window.
3
No Disc
Check the movement of the sled, and click the
[OK]
button in the message window.
4
No Disc
Check the rotation of the spindle, and click the
[OK]
button in the message window.
Sensors
Fig. 6-2-11
2-3-2.
Diagnosing Method
2-3.
DIAGNOSIS
2-3-1.
Menu in Diagnosis Section
START button:
All items of diagnosis buttons are executed
in the descending order.
Diagnosis button:
Only the diagnostic item assigned to the
button name is executed.
Status lamp:
Diagnosis status is displayed with color.
White
White
Not diagnosed
Red blinking
Diagnosis in progress
Green
Diagnosis OK
Red
Diagnosis NG
START button
Status lamp
Diagnosis buttons
6-49
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
Order
Diagnostic item
Message
Disc
Operation
5
No Disc
Set the Optical sensor disc.
(At this time, when the Shock Sensor senses a
shock normally, this message disappears.
(At this time, when the Shock Sensor senses a
shock normally, this message disappears.
7
-R Seek
Set the DVD-R Disc for Self Jitter, and then
close the disc cover and click the
close the disc cover and click the
[OK]
button
in the message window.
8
-R Read
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
9
-R Write
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
10
-RW Seek
Remove the DVD-R Disc for Self Jitter, and
set the DVD-RW Reference + DOW Disc, and
then close the disc cover and click the
set the DVD-RW Reference + DOW Disc, and
then close the disc cover and click the
[OK]
button in the message window.
11
-RW Read
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
12
-RW Write
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
DVD-R Disc
for Self Jitter
for Self Jitter
DVD-RW
Reference + DOW
Disc
Reference + DOW
Disc
6
Set the Optical sensor disc, and with the disc
cover left open, click the [OK] button in the
message window. (Note 1)
cover left open, click the [OK] button in the
message window. (Note 1)
Note 1:
In the process of checking optical power, CLASS 1M laser optical radiates.
So do not remove the Optical sensor disc.
Optical Sensor Disc
Sensors
6-50
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
Order
Diagnostic item
Message
Disc
Operation
13
+RDL Seek
Remove the DVD-RW Reference + DOW
Disc, and set the DVD+RDL Self Disc, and
then close the disc cover and click the
Disc, and set the DVD+RDL Self Disc, and
then close the disc cover and click the
[OK]
button in the message window.
14
+RDL Read
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
15
+RDL Write
(If the diagnosis result of previous item is OK,
this item is executed successively.)
this item is executed successively.)
16
No Disc
Remove the DVD+RDL Self Disc.
(On the AUDIT screen, if the status lamps of
respective diagnosis buttons are all lit in green,
the diagnosis is over.)
(On the AUDIT screen, if the status lamps of
respective diagnosis buttons are all lit in green,
the diagnosis is over.)
Note 2:
Before exiting the AUDIT, click the
[SET]
button of “After completing the TEST” to cancel the TEST mode.
DVD+RDL
Self Disc
Self Disc
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.