Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ▷ View online
6-19
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
5.
CAMERA Adjustment 2
(Using the flange back adjustment chart and
subject more than 500 m away)
(Using the flange back adjustment chart and
subject more than 500 m away)
5-1. CAMERA Adjustment 2 (1)
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back (1) Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back (1) Adj.
3. Release of Data Setting during Camera Adj.
[Preparation]
1) Place the Flange back adjustment chart at 2 m position away
1) Place the Flange back adjustment chart at 2 m position away
from the lens.
2) Check that the center of Flange back adjustment chart meets
the center of shot image screen with the zoom lens at TELE
end and WIDE end respectively.
end and WIDE end respectively.
[Adjusting method]
1) Click the [Start $1%] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start $1%] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject by referring to “Preparation”.
ject by referring to “Preparation”.
4) If the [OK] button is clicked, “2. Flange Back (1) Adj.” and “3.
Release of Data Setting during Camera Adj.” will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 2 (1), the following message is displayed. Click
the [OK] button.
the [OK] button.
6) Perform “CAMERA Adjustment 2 (2)”.
5-2. CAMERA Adjustment 2 (2)
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back (2) Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back (2) Adj.
3. Release of Data Setting during Camera Adj.
[Preparation]
1) Set the zoom lens to the TELE end and expose a subject that is
1) Set the zoom lens to the TELE end and expose a subject that is
more than 500 m away.
(subjects with clear contrast such as building, etc.)
(Nearby subjects less than 500 m away should not be in the screen)
(Nearby subjects less than 500 m away should not be in the screen)
[Adjusting method]
1) Click the [Start $2%] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start $2%] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject by referring to “Preparation”.
ject by referring to “Preparation”.
4) If the [OK] button is clicked, “2. Flange Back (2) Adj.” will be
executed.
The following message is displayed during the execution of
adjustment, and then place the ND filter on the lens so as to
obtain the optimum image.
The following message is displayed during the execution of
adjustment, and then place the ND filter on the lens so as to
obtain the optimum image.
5) If “2. Flange Back Adj.” completed successfully, “3. Release
of Data Setting during Camera Adj.” will be executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 2 (2), the following message is displayed. Click
the [OK] button.
the [OK] button.
Ver. 1.1 2008.01
6-20
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
6.
CAMERA Adjustment 3
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Check
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 3.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
ject in accordance with the message.
4) If the [OK] button is clicked, “2. Flange Back Check” is ex-
ecuted. The following messages are displayed, and then oper-
ate the camera to make a check in accordance with the mes-
sages.
ate the camera to make a check in accordance with the mes-
sages.
5) Upon completion of “2. Flange Back Check”, “3. Release of
Data Setting during Camera Adj.” is executed.
6) Upon successful completion of all items of the CAMERA
Adjustment 3, the following message is displayed. Click the
[OK] button.
[OK] button.
Ver. 1.1 2008.01
6-21
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
7.
CAMERA Adjustment 4
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Center Frame)
3. F No. Standard Data Input
4. MAX GAIN Adj.
5. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Center Frame)
3. F No. Standard Data Input
4. MAX GAIN Adj.
5. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Select the model (NTSC Model or PAL Model) with the Model
1) Select the model (NTSC Model or PAL Model) with the Model
Select radio button.
Note:
NTSC model: DCR-DVD610
PAL model: DCR-DVD110E/DVD115E/DVD610E
PAL model: DCR-DVD110E/DVD115E/DVD610E
2) Click the [Start] button of the CAMERA Adjustment 4.
3) The Automatic Adjustment Program executes “1. Data Setting
3) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
4) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed during the
execution of “2. Picture Frame Setting (Center Frame)”. Set
the subject in accordance with the message.
execution of “2. Picture Frame Setting (Center Frame)”. Set
the subject in accordance with the message.
5) If the [OK] button is clicked, the following message is dis-
played, and then check the size of clear chart shot on the moni-
tor screen.
tor screen.
6) After the checking, if the [OK] button in the message window
is clicked, the adjustment items from “3. F No. Standard Data
Input” to “4. MAX GAIN Adj.” are executed.
Input” to “4. MAX GAIN Adj.” are executed.
7) Upon successful completion of the “4. MAX GAIN Adj.”, “5.
Release of Data Setting during Camera Adj.” is executed.
8) Upon successful completion of all items of the CAMERA
Adjustment 4, the following message is displayed. Click the
[OK] button.
[OK] button.
8.
CAMERA Adjustment 5
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Color Reproduction Adjustment Frame)
3. Color Reproduction Adj.
4. Color Reproduction Check
5. Picture Frame Setting (AWB Adjustment Frame)
6. AWB & LV Standard Data Input
7. AWB Adj.
8. AWB Check
9. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Picture Frame Setting (Color Reproduction Adjustment Frame)
3. Color Reproduction Adj.
4. Color Reproduction Check
5. Picture Frame Setting (AWB Adjustment Frame)
6. AWB & LV Standard Data Input
7. AWB Adj.
8. AWB Check
9. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Select the model (NTSC Model or PAL Model) with the Model
1) Select the model (NTSC Model or PAL Model) with the Model
Select radio button.
Note:
NTSC model: DCR-DVD610
PAL model: DCR-DVD110E/DVD115E/DVD610E
PAL model: DCR-DVD110E/DVD115E/DVD610E
2) Click the [Start] button of the CAMERA Adjustment 5.
3) The Automatic Adjustment Program executes “1. Data Setting
3) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
4) Upon successful completion of the “1. Data Setting during
Camera Adj.”, “2. Picture Frame Setting (Color Reproduction
Adjustment Frame)” is executed and the following message is
displayed. Adjust the zoom and camera direction and then set
the picture frame. After the setting finished, click the [End]
button.
Adjustment Frame)” is executed and the following message is
displayed. Adjust the zoom and camera direction and then set
the picture frame. After the setting finished, click the [End]
button.
The buttons on this screen provide the following functions:
[Save the position] button
[Save the position] button
Saves the camera zoom and focus position data.
[Load the position] button
Reads the camera zoom and focus position data saved last and
moves the camera zoom and focus to that position.
moves the camera zoom and focus to that position.
Note 1:
The zoom and focus position data are saved with
“DCR_DVD610_ZoomFocusData.txt” file name in the
same holder as the Automatic Adjustment Program.
No position data can be read if this file is moved or de-
leted.
“DCR_DVD610_ZoomFocusData.txt” file name in the
same holder as the Automatic Adjustment Program.
No position data can be read if this file is moved or de-
leted.
Note 2:
Only the latest position data can be saved. If the [Save
the position] button is clicked, the latest data are saved
overwriting the previous data.
the position] button is clicked, the latest data are saved
overwriting the previous data.
6-22
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
8) After the setting, if the [OK] button is clicked, the adjustment
items from “6. AWB & LV Standard Data Input” to “8. AWB
Check” are executed. During the execution, the following
messages are displayed in the order given below. Place or re-
move the filters on the lens in accordance with the messages.
Check” are executed. During the execution, the following
messages are displayed in the order given below. Place or re-
move the filters on the lens in accordance with the messages.
9) Upon completion of “8. AWB Check”, “9. Release of Data
Setting during Camera Adj.” is executed
10) Upon successful completion of all items of the CAMERA
Adjustment 5, the following message is displayed. Click the
[OK] button.
[OK] button.
5) After setting the picture frame, if the [End] button is clicked,
“3. Color Reproduction Adj.” and the adjustment items of “4.
Color Reproduction Check” are executed. The following mes-
sages are displayed in the order given below during the
excution. Then, change the chart in accordance with the mes-
sages.
Color Reproduction Check” are executed. The following mes-
sages are displayed in the order given below during the
excution. Then, change the chart in accordance with the mes-
sages.
6) Upon successful completion of the “7. Color Reproduction
Check”, the following message is displayed. Then, set the pic-
ture frame in accordance with the message.
ture frame in accordance with the message.
7) If the [OK] button is clicked, “5. Picture Frame Setting (AWB
Adjustment Frame)” is executed. The following messages are
displayed in the order given below during the execution. Then,
change the chart in accordance with the messages.
displayed in the order given below during the execution. Then,
change the chart in accordance with the messages.
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.