Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ▷ View online
6-7
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-6
1
[Connecting the Equipment] button
A connection diagram of the equipment is displayed.
A connection diagram of the equipment is displayed.
2
[CONNECT] button
The mode of Camcorder is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 - qa is enabled.
The mode of Camcorder is switched to the Adjustment Mode.
When the Adjustment Mode has switched normally, the op-
eration of the buttons 4 - qa is enabled.
3
[END] button
The mode of Camcorder is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
The mode of Camcorder is switched to the normal mode.
When the normal mode has switched correctly, the Automatic
Adjustment Program is finished.
4
[DESTINATION DATA WRITE] button
The “DESTINATION DATA WRITE” screen appears.
The “DESTINATION DATA WRITE” screen appears.
5
[USB SERIAL No. INPUT] button
The “USB SERIAL No. INPUT” screen appears.
The “USB SERIAL No. INPUT” screen appears.
6
[VIDEO SYSTEM ADJUSTMENT] button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
7
[CAMERA SYSTEM ADJUSTMENT] button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
8
[LCD/EVF SYSTEM ADJUSTMENT] button
The “LCD/EVF SYSTEM ADJUSTMENT” screen appears.
The “LCD/EVF SYSTEM ADJUSTMENT” screen appears.
9
[AUDIO SYSTEM ADJUSTMENT] button
The “AUDIO SYSTEM ADJUSTMENT” screen appears.
The “AUDIO SYSTEM ADJUSTMENT” screen appears.
q;
[SERVICE MODE] button
The “SERVICE MODE” screen appears.
The “SERVICE MODE” screen appears.
qa
[DATA BACKUP] button
The “DATA BACKUP” screen appears.
The “DATA BACKUP” screen appears.
qs
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
qd
[Adjust item] button
“Adjusting items when replacing main parts and boards” table
is displayed.
“Adjusting items when replacing main parts and boards” table
is displayed.
1-2.
ADJUSTMENT PROGRAM
The DCR-DVD110E/DVD115E/DVD310E/DVD410E//DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E are adjusted
by the Automatic Adjustment Program. The Automatic Adjustment
Program enters automatically via the SeusEX the adjustment op-
erations that were formerly entered manually by the adjustment
remote commander (some items may be adjusted by manual op-
eration on the operation screen of the SeusEX).
DVD610E/DVD710/DVD710E/DVD810/DVD810E are adjusted
by the Automatic Adjustment Program. The Automatic Adjustment
Program enters automatically via the SeusEX the adjustment op-
erations that were formerly entered manually by the adjustment
remote commander (some items may be adjusted by manual op-
eration on the operation screen of the SeusEX).
1.
Precautions When Using Automatic Adjustment
Program
Program
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camcorder via the SeusEX. Accordingly, the
Automatic Adjustment Program must be used in the environ-
ment where the SeusEX operates.
cation with the camcorder via the SeusEX. Accordingly, the
Automatic Adjustment Program must be used in the environ-
ment where the SeusEX operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS or the SeusCam is running. Exit the SEUS or the
SeusCam before using the Automatic Adjustment Program.
SeusCam before using the Automatic Adjustment Program.
3) The SeusEX must be already started on the PC when using the
Automatic Adjustment Program. With the SeusEX not started,
some adjustment items will take time in adjustment.
some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
2.
Start of Automatic Adjustment Program
Double-click the application file (DCR-DVD610 Series Auto-Adj
Ver_1.3r04.exe or DCR-DVD710 Series Auto-Adj Ver_1.3r04.exe),
and the Automatic Adjustment Program will start.
Ver_1.3r04.exe or DCR-DVD710 Series Auto-Adj Ver_1.3r04.exe),
and the Automatic Adjustment Program will start.
3
5
4
7
8
6
2
1
q;
qa
qs
9
qd
Ver. 1.3 2008.05
6-8
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
4.
Setting of Adjustment Mode
Before performing the adjustment, “Setting of Adjustment Mode”
is required.
is required.
[Setting method]
1) Connect the Camcorder to the PC with a USB cable, and turn
1) Connect the Camcorder to the PC with a USB cable, and turn
on the power switch.
2) The USB SELECT menu will appear on the LCD screen of
the Camcorder, and then select “USB CONNECT (Memory
Stick)” to establish the connection.
Stick)” to establish the connection.
3) Start the Automatic Adjustment Program, and click the [Con-
nect] button on the Main Menu screen.
4) When the following message is displayed, turn off and on again
the power switch of the Camcorder.
Note:
Turning off and on the power switch causes the
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
5) Upon successful completion of the settings in the Adjustment
Mode, the operation of each button on the Main Menu screen
is enabled.
is enabled.
5.
Release of Adjustment Mode
To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.
ment Mode”.
[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
sage window to exit the Automatic Adjustment Program.
Note:
The Camcorder switches to the normal mode by turn-
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
6-9
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
1-3.
DESTINATION DATA WRITE
Note:
The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-7 will appear.
Menu screen, and the “DESTNATION DATA WRITE” screen
in Fig. 6-1-7 will appear.
Fig. 6-1-7
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Model Name List
Selects the model name.
Selects the model name.
3
Destination List
Selects the written destination.
Selects the written destination.
4
[Data Write] button
Write the destination data to the camcorder.
Write the destination data to the camcorder.
2.
Destination Data Write
[Writing method]
1) Select the model name from the pulldown list.
1) Select the model name from the pulldown list.
2) Select the target destination from the pulldown list.
3) Click the [Data Write] button.
4) Following message will be appeared after completing data
writing.
5) After the destination data writing completed, click the Desti-
nation Check button to check the destination.
3
2
4
1
5
5
Destination Check button
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
6-10
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
Table 6-1-3
3.
Selectable Language Table
English
Japanese
French
Italian
German
Spanish
Dutch
Russian
Simplified Chinese
Portuguese
Greek
Braz.Portuguese
Canadian French
Espanyol
Traditional Chinese
Korean
Simplified English
Albanian
Persian
Thai
Turkish
Polish
Czech
Hungarian
Indonesia
Melayu
J1
J
z
U2
US
z
a
a
a
a
MX2
MX
a
a
a
z
a
AR2
AR
a
a
a
z
a
BR1
BR
a
z
a
a
a
E33
a
a
a
z
a
E23
z
a
a
a
a
a
a
KR2
KR
a
a
a
a
a
z
a
JE3
JE
z
a
a
a
a
a
a
CA2
CND
z
a
a
a
a
a
a
E35
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
E36
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
E37
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
TH6
Thai
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
HK1
HK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
AU2
AUS
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CN1
CH
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
JE3
JE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEL
NE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEI
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEJ
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEM
EE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
z
: INITIAL LANGUAGE
SELECTABLE LANGUAGE
AREA
E
NTSC model
PAL model
E
DESTINATION
AEP
Ver. 1.3 2008.05
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.