Sony DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) Service Manual ▷ View online
6-15
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
1-6.
CAMERA SYSTEM ADJUSTMENTS
(Non MEGA model)
(Non MEGA model)
1.
Function of Each Button on Camera System
Adjustment Screen
Adjustment Screen
Click the [CAMERA SYSTEM ADJUSTMENT] button on the Main
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-11 will appear.
Menu screen, and the “CAMERA SYSTEM ADJUSTMENT”
screen in Fig. 6-1-11 will appear.
Fig. 6-1-11
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
[Preparation] button
Notes for adjustment or jigs used are displayed.
Notes for adjustment or jigs used are displayed.
3
[Start] button
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 6” starts.
Each adjustment from “Camera Adjustment 1” to “Camera
Adjustment 6” starts.
4
Model Select radio button
Selects the model to be adjusted.
Selects the model to be adjusted.
Note:
NTSC model: DCR-DVD610
PAL model: DCR-DVD110E/DVD115E/DVD610E
PAL model: DCR-DVD110E/DVD115E/DVD610E
5
[Release Data Setting] button
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
The data setting at the adjustment is cancelled.
During the data setting, the button color changes from “white”
to “red”. When the data setting is cancelled, the button color
returns to “white”.
(Use this button when an error occurred in the camera adjust-
ment. If the adjustment completed successfully, the data set-
ting is automatically cancelled and the button color returns to
“white”.)
5
3
2
1
2
3
3
3
4
6-16
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
2.
Adjustment Items of Camera System Adjustment
The adjustment items of camera system adjustment are as listed in
Table 6-1-5. The Automatic Adjustment Program divides the ad-
justment items into six, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Table 6-1-5. The Automatic Adjustment Program divides the ad-
justment items into six, camera adjustment 1-6. Clicking either
CAMERA Adjustment Start button allows the adjustment item
which corresponds to that button to be executed.
The adjustment conditions of the subject and filter vary depend-
ing on which item is adjusted. The Adjustment Program displays
an instruction for the subject and filter as a message during the
adjustment.
Note:
Dark Siemens star chart.
Table 6-1-5
Block
Page
Address
CAMERA
Adjustment 1
Adjustment 1
HALL Adj.
Not required
11
61
0150 to 0159,
0190 to 019B
0190 to 019B
Siemens star chart with ND filter for
minipattern box (Note) or
Flange back adjustment jig
minipattern box (Note) or
Flange back adjustment jig
Flange back adjustment chart and
subject more than 500 m away
subject more than 500 m away
CAMERA
Adjustment 3
Adjustment 3
Flange Back Check
Siemens star chart
-
-
-
F No. Standard Data Input
11
61
0160 to 017F
MAX GAIN Adj.
11
61
015C to 015F
Color Reproduction Adj.
11
61
0060 to 006E
Color Reproduction Check
-
-
-
AWB & LV Standard Data Input
Clear chart
(All White frame)
(All White frame)
11
61
0074 to 007B,
0180 to 018B,
01C0 to 01C3
0180 to 018B,
01C0 to 01C3
AWB Adj.
Clear chart
(All White frame)
Filter C14 for color temperature
correction
(All White frame)
Filter C14 for color temperature
correction
11
61
0070 to 0073,
008C to 0093,
01C4 to 01C7
008C to 0093,
01C4 to 01C7
AWB Check
Clear chart
(All White frame)
ND filter 1.0, 0.4 and 0.1
(All White frame)
ND filter 1.0, 0.4 and 0.1
-
-
-
CAMERA
Adjustment 6
Adjustment 6
Black Defect Adj.
Clear chart (All White)
(Shoot the clear chart with the zoom
TELE end.)
(Shoot the clear chart with the zoom
TELE end.)
11
61
00C0 to 011D,
01A0 to 01B3
01A0 to 01B3
Color bar chart
(Color reproduction adjustment frame)
(Color reproduction adjustment frame)
0020 to 0030,
004C, 004D
004C, 004D
61
11
CAMERA
Adjustment 2
Adjustment 2
Flange Back Adj.
Clear chart
(Center frame)
(Center frame)
CAMERA
Adjustment 4
Adjustment 4
CAMERA
Adjustment 5
Adjustment 5
Subject
Adjustment
Button Name
Adjusting Address
6-17
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
3.
CAMERA Adjustment 1
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. HALL Adj.
3. Release of Data Setting during Camera Adj.
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 1.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) If “1. Data Setting during Camera Adj.” completed success-
fully, and the items “2. HALL Adj.” and “3. Release of Data
Setting during Camera Adj.” will be executed.
Setting during Camera Adj.” will be executed.
4) Upon successful completion of all items of the CAMERA
Adjustment 1, the following message is displayed. Click the
[OK] button.
[OK] button.
6-18
DCR-DVD110E/DVD115E/DVD310E/DVD410E/DVD610/
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
DVD610E/DVD710/DVD710E/DVD810/DVD810E_ADJ
[Preparation (Using the flange back adjustment jig)]
(Illuminance: 950 to 1050 lux)
(Illuminance: 950 to 1050 lux)
Note 2:
When using the flange back adjustment jig, take care of
the following points:
• For the illumination, use a light source such as an in-
the following points:
• For the illumination, use a light source such as an in-
candescent lamp or inverter type fluorescent light free
from flickering.
from flickering.
• Do not make an adjustment in the environment where
fluorescent lamp flickering occurs even if the illumi-
nance can be ensured with the room illumination only.
Use an incandescent lamp or inverter type fluorescent
light at a place free from the influence of room illumi-
nation.
nance can be ensured with the room illumination only.
Use an incandescent lamp or inverter type fluorescent
light at a place free from the influence of room illumi-
nation.
1) Install the flange back adjustment jig so that the distance be-
tween it and the front of lens of camera is less than 3 cm.
2) Make the height of flange back adjustment jig and the camera
equal.
3) Check that the center of chart meets the center of shot image
screen with the zoom lens at TELE end and WIDE end respec-
tively.
tively.
Fig. 6-1-13
[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
1) Click the [Start] button of the CAMERA Adjustment 2.
2) The Automatic Adjustment Program executes “1. Data Setting
during Camera Adj.”.
3) Upon successful completion of the “1. Data Setting during
Camera Adj.”, the following message is displayed. Set the sub-
ject by referring to “Preparation”.
ject by referring to “Preparation”.
4) If the [OK] button is clicked, “2. Flange Back Adj.” and “3.
Release of Data Setting during Camera Adj.” will be executed.
5) Upon successful completion of all items of the CAMERA
Adjustment 2, the following message is displayed. Click the
[OK] button.
[OK] button.
4.
CAMERA Adjustment 2
(Using the minipattern box or flange back adjust-
ment jig)
(Using the minipattern box or flange back adjust-
ment jig)
[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
sequence]
1. Data Setting during Camera Adj.
2. Flange Back Adj.
3. Release of Data Setting during Camera Adj.
[Preparation (Using the minipattern box)]
1) The minipattern box is installed as shown in the following fig-
1) The minipattern box is installed as shown in the following fig-
ure.
Note 1:
The attachment lenses are not used.
2) Install the minipattern box so that the distance between it and
the front of lens of camera is less than 3 cm.
3) Make the height of minipattern box and the camera equal.
4) Check the output voltage of the regulated power supply is the
4) Check the output voltage of the regulated power supply is the
specified voltage
± 0.01 Vdc.
5) Check that the center of Siemens star chart meets the center of
shot image screen with the zoom lens at TELE end and WIDE
end respectively.
end respectively.
Specified voltage: The specified voltage varies according to the
minipattern box, so adjustment the power sup-
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the
minipattern box.
ply output voltage to the specified voltage writ-
ten on the sheet which is supplied with the
minipattern box.
Fig. 6-1-12
Minipattern box
Below 3 cm
Camera
Red (+)
Black (–)
Yellow (SENS +)
White (SENS –)
Black (GND)
Need not connected
Regulated power supply
Output voltage : Specified voltage
±
0.01 Vdc
Output current : more than 3.5 A
Flange back adjustment jig
Below 3 cm
Camera
Ver. 1.1 2008.01
Click on the first or last page to see other DCR-DVD110E / DCR-DVD115E / DCR-DVD310E / DCR-DVD410E / DCR-DVD610 / DCR-DVD610E / DCR-DVD710 / DCR-DVD710E / DCR-DVD810 / DCR-DVD810E (serv.man4) service manuals if exist.