DOWNLOAD Sony CCD-TRV107 / CCD-TRV108 / CCD-TRV308 / CCD-TRV408 / CCD-TRV608 Service Manual ↓ Size: 16.83 MB | Pages: 127 in PDF or view online for FREE

5-4

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

J-12

Filter for color temperature correction (C14)

ND filter 1.0

ND filter 0.4

ND filter 0.1

Pattern box PTB-450

Color chart for pattern box

Adjustment remote commander (RM-95 upgraded)
(Note)

Siemens star chart

Clear chart for pattern box

Multi CPC jig

CPC jig connector

Minipattern box

Camera base

I/F unit for LANC control

J-6080-058-A

J-6080-808-A

J-6080-806-A

J-6080-807-A

J-6082-200-A

J-6020-250-A

J-6082-053-B

J-6080-875-A

J-6080-621-A

J-6082-311-A

J-6082-539-A

J-6082-353-B

J-6082-384-A

J-6082-521-A

Auto white balance adjustment/check
White balance adjustment/check

White balance check

White balance check

White balance check

For checking the flange back

For adjusting the LCD block

For connecting the adjustment remote commander

For adjusting the flange back

For adjusting the flange back

For connecting the adjustment remote commander

• Oscilloscope

• Color monitor

• Vectorscope

• Regulated power supply

• Digital voltmeter

If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor
(8-759-148-35).

J-1

J-2

J-6

J-3

J-7

J-8

J-4

J-5

Fig. 5-1-1.

J-9

J-10

J-11

J-12

5-5

Fig. 5-1-2.

For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.

When performing only the adjustments, the lens block and boards
need not be disassembled.

1)

Connect the equipment for adjustments according to Fig. 5-1-4.

2)

Connect the adjustment remote commander to CN713 of VC-
272 board via the I/F unit for LANC control (J-6082-521-A)
and CPC jig connector (J-6082-539-A). To operate the
adjustment remote commander, connect the AC power adapter
to the DC IN jack of I/F unit for LANC control, or connect the
L series Info-LITHIUM battery to the battery terminal of I/F
unit for LANC control. (Fig. 5-1-3.)

3)

The front panel block (SI-033 board, microphone unit, video
light) need not be assembled except during the steady shot
operation check.

As removing the cabinet (R) (removing the VC-272 board CN709)
means removing the lithium 3V power supply (CF-2000 block
BT001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc.) will be lost. Before removing, note down
the self-diagnosis data (data of page: 2, address: B0 to C6) and
data on history use (data of page: 2, address: A2 to AA and E0 to
E2). (Refer to “5-4. Service Mode” for the self-diagnosis data and
data on the history use.)

Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE

button.

The above procedure will enable the camera power to be turned
on with the SS-2000 block removed. After completing adjustments,
be sure to exit the “Forced Camera Power ON Mode”.

Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE

button.

3) Select page: 0, address: 01, and set data: 00.

Front of the lens

1.5 m

Pattern box

Fig. 5-1-3.

CPC jig connector

CPC jig

Remove the CPC lid

CN713

Conductor side

16

1

5-6

Fig. 5-1-4.

Use either a AC power adaptor or a Info-LITHIUM battery as the power supply of the I/F unit for LANC control.

Must be connected

To CF-2000 block

Must be connected when performing
the LCD system adjustment

Multi CPC jig
(J-6082-311A)

To PD-156 board
CN5701

Must be connected when 
performing the LCD 
system adjustment.

Cabinet (R)

Need not be connected

SI-033 board
CN752

A/V OUT jack

Must be connected when
performing the EVF system
adjustments.

Need not be connected

Must be connected

To SS-2000
block

*

1: CCD-TRV608

USB connector (

*

1)

DC IN
jack

AC power adaptor
(8.4Vdc)
AC-L10 or
AC-VQ800 etc

AUDIO
(black)

AC power adaptor
(8.4Vdc)
AC-L10 or
AC-VQ800 etc

Terminated at 75 

Ω

Vector scope

Adjustment
remote commander

L series
Info LITHIUM
Battery
(7.2Vdc)

Color monitor

LANC
jack

I/F unit for LANC control (J-6082-521-A)

Front
panel
block

VIDEO
(Yellow)

Must be connected

CPC jig connector
(J-6082-539-A)

EVF block

Lens block

VC-272
board

PD-156 board

CN712

CN5501

CN5601

CN5502

CN5701

CN5702

CN5704

CN707

CN706

CN711

CN001

CN709

CN101

CN701

CN704

CN703

CN271

CN705

CN713

CN301

CN710

CN715 (

*

1)

5-7

Fig. a

(Video output terminal

output waveform)

Fig. b (TV monitor picture)

Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a
and the TV monitor display shown in Fig. b.

2. Order of Adjustments
Basically carry out adjustments in the order given.

Fig. 5-1-5.

3. Subjects
1)

Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 5-1-5. (Color reproduction
adjustment frame)

2)

Clear chart (Color reproduction adjustment frame)
Remove the color bar chart from the pattern box and insert a
clear chart in its place. (Do not perform zoom operations during
this time.)

3)

Flange back adjustment chart
Make the chart shown in Fig. 5-1-6. using A0 size (1189mm 

×

841mm) black and white vellum paper.

Fig. 5-1-6.

Note: Use matte vellum paper bigger than A0, and make sure the edges of

the black and white paper joined together are not rough.

1. Setting the Switch
Unless otherwise specified, set the switches as follows and perform
adjustments without loading cassette.

1.

POWER switch (SS-2000 block) ........................... CAMERA

2.

NIGHT SHOT switch (Lens block) ................................. OFF

3.

LIGHT switch (FK-2000 block) *1 ................................. OFF

4.

DEMO MODE (Menu display) ....................................... OFF

5.

DIGITAL ZOOM (Menu display) ................................... OFF

6.

STEADY SHOT (Menu display) *2 ................................ OFF

7.

DISPLAY (Menu display) ................................. V-OUT/LCD

8.

DISPLAY (CF-2000 block) .............................................. ON

9.

FOCUS switch (CF-2000 block) .......................... MANUAL

10. BACK LIGHT (CF-2000 block) ...................................... OFF
11. PROGRAM AE (Menu display) ...................................... OFF
12. PICTURE EFFECT (Menu display) ................................ OFF
13. 16 : 9 WIDE (MENU display) ......................................... OFF

*1: Video light model (CCD-TRV107/TRV308/TRV408/TRV608)
*2: Steady shot model (CCD-TRV308/TRV408/TRV608)