DOWNLOAD Sony DVP-NS3100ES Service Manual ↓ Size: 10.53 MB | Pages: 102 in PDF or view online for FREE

9

2

panel loading assy

1

Pull out the tray.
(Refer to page 6, HOW TO OPEN THE
PANEL LOADING ASSY WHEN 
POWER SWITCH TURNS OFF.)

6

two claws

7

front panel section

5

terminal

4

wire (flat type) (19 core)
(CN402)

6

two claws

3

five screws
(BVTP3 

×

 8)

6

three screws
(B3 

×

 8)

4

wire (flat type) (31 core)
(CN102)

7

mechanism deck
(CDM66DB-DVBU66)

2

panel loading assy

5

connector (CN101)

1

Pull out the tray.
(Refer to page 6, HOW TO OPEN THE
PANEL LOADING ASSY WHEN
POWER SWITCH TURNS OFF.)

3

Push the tray.

10

1

floating screw (DIA. 12)

2

– BOTTOM VIEW –

3

base unit
(DVBU66)

base unit (DVBU66)

cam (66)

1

two screws
(BTTP M2.6)

2

flexible board
(CN002)

4

flexible board
(CN002)

3

5

BU board

6

step screw (M)

9

insulator

q;

insulator (RB)

q;

insulator (RB)

qa

optical traverse unit
(DBU-3)

8

holder (66D)

6

step screw (M)

7

6

step screw (M)

11

This mode let you lock the disc tray. When this mode is activated,
the disc will not eject when

A

button is pressed. The message

“TRAY LOCKED” will be displayed in on the FL tube.

Procedure:
1. Press the 

 I/

1

button to turn the power on.

2. While pressing the

x

button, press the

A

button until “TRAY

LOCKED”or”TRAY UNLOCKED”displayed on the FL tube
(around 5 seconds).

This player can lock the disc tray to prevent children from opening
it.

Procedure:
1. In the standby mode, press the [RETURN] , [ENTER] ,  

 I/

1

buttons

on the remote in this order.

2. It turns on and “LOCKED” appears on the FL rube.
3. The [OPEN/CLOSE] button on the player and the remote do not

work thile this lock is set.

4. To release this lock, when the player is in standby mode,operate

the remote in the same manner as step 1 again.
It turns jon ande “UNLOCK”appears on the FL tube.

If the supplied remote interferes with your other Sony DVD player,
change the command mode setting for this player and the supplied
remote to one that differs from the other Sony DVD player.
The default command mode setting for this  player and the supplied
remote is DVD 1.

Procedure:
1. slide the COMMAND MODE switch in the battery case of the

remote to select the command mode(DVD 1, DVD 2, or DVD 3)
so that the setting for the remote differs from that of the other
DVD players.
For example, it the other DVD players respond to the default
command mode setting for the supplied remote(DVD 1), set the
remote to DVD 2 or DVD 3.

2. In the standby mode, hold down [MULTI/2CH] button and press

I/

1

button on the player. The command mode appears or the FL

tube as follows.

3. Repeat steps 2 and 3 until the displayed command mode matches

that of the supplied remote.

C, MODE DVD2

If this mode is dxecuted, each setting data is initialized.

Procedure:
1. In the standby mode, while pressing the  X  and [SA-CD/CD]

buttons,press the   N  button.

2. When enter the Ship Mode, it displays “SETUP INIT” on the

FL tube and start the data initializing.

3. When the initializing is complete, it displays “FINISHED” on

the FL tube, Then press the 

 I/

1

button and back to standby mode.

12

The Test Mode allows you to make diagnosis and adjustment easily
using the remote commander and monitor TV. The instructions,
diagnostic results, etc. are given on the on-screen display (OSD).

Press the [TOP MENU], [CLEAR],

I/

1

keys on the remote commander

in this order with standby status, and the Test Mode starts, then
“DIAG START” will be displayed on the fluorescent display tube
and the menu shown below will be displayed on the TV screen. At
the bottom of menu screen, the model name and revision number
are displayed. Last Off at the lower right of screen indicates the
information code concerning the last power off. To execute each
function, select the desired menu and press its number on the remote
commander. To exit from the Test Mode, press the

I/

1

key.

Test Mode Menu

0. B/E Diagnosis

1. Drive Auto Adjustment

2. Drive Manual Operation

3. Mecha Aging

4. Emergency History

5. Version Information

6. Video Level Adjustment

Exit: Power Key

Model   :DVP-NS3100ES

Revision:xxx xxx

The same contents as board detail check by serial interface can be
checked from the remote commander. On the Test Mode Menu
screen, press [0] key on the remote commander, and the following
check menu will be displayed.

### BackEnd Diagnosis ###

Check Menu

0 . Quit

1 . All

2 . Version

3 . Peripheral

4 . Servo

5 . Video

6 . Audio

Model   :DVP-NS3100ES

Revision:xxx xxx

Quit the Syscon Diagnosis and return to the Test Mode Menu.

This menu checks all diagnostic items continuously. Normally, all
items are checked successively one after another automatically
unless an error is found, but at a certain item that requires judgment
through a visual check to the result, the following screen is displayed
for the key entry.

•

### BackEnd Diagnosis ###

2. Version

2-0. Quit

2-1. ALL

2-2. Revision:x.xxx

2-4. Model   :SINGLE QS(X)

2-5. Region:x

Press NEXT Key to Continue

Following the message, press

>

key to go to the next item.

To  quit the diagnosis and return to the Check Menu screen,
press

x

or  [ENTER]  key.  If an error occurred, the diagnosis is

suspended.
Press

.

key to repeat the same item where an error occurred,

or

>

key to continue the check from the item next to faulty item.

(2-2) Revision

ROM revision number is displayed.
Error: Not detected.
The revision number defined in the source file is displayed
with four digits.

(2-4) Model Type

Model code is displayed.
Error: Not detected.
The model code read from the Inter Face 

µ

-con is displayed.

(2-5) Region

Region code is displayed.
Error: Not detected.
The region code determined from the model code is
displayed.