Sony SAL500F80 Service Manual ▷ View online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP04
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the back side of the mount index, and attach it to the outer barrel assy set.
2.
Apply the anti-diffusion agent (A-20) to the instruction portions of the outer barrel assy set as shown in the figure.
Outer Barrel Assy
Apply the Anti-Diffusion Agent (A-20)
Apply the Anti-Diffusion Agent (A-20)
Apply the Adhesive Bond (LOCTITE 460)
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP05
Adhesive bond (B-10): J-6082-612-A
1.
Affix the flexible substrate setting tape to the main flexible unit. Then, affix the focus hold block of main flexible unit to the outer
barrrel assy.
2.
Attach the click plate and washer to the fixed holding tube set with the screw.
3.
Apply the adhesive bond (B-10) to the head of screw.
4.
Affix the button base set tape to the focus hold button base. Then, affix the focus hold button base to the outer barrrel assy.
Outer Barrel Assy
Dust Proofing Tape
Flexible Substrate Setting Tape
Click Plate
Main Flexible Unit
Washer
Screw
Focus Hold Button
Button Base Setting Tape
Focus Hold Button Base
Apply the Adhesive Bond (B-10)
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP06
1.
Make folds by folding the main flexible unit in the order of numbers shown in the figure.
2.
Aligning the portion A of main flexible unit with the position of focus hold button block of outer barrrel assy, affix the main flexible
unit to the inner wall of fixed holding tube set.
Note:
Fix firmly the main flexible unit to the inner wall of fixed holding tube set so as not to protrude inward.
Fold Downward
Fold Downward
Fold Downward
Fold Upward
A Portion
Main Flexible Unit
Main Flexible Unit
Outer Barrel Assy
Outer Barrel Assy
A Portion
A Portion
Focus Hold Button
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP07
Adhesive bond (B-40): J-6082-614-A
Grease (G-10):
J-6082-618-A
1.
Apply the grease (G-10) to the gear on the gear block and gear portion of the gear (B) as shown in the figure.
2.
Apply the grease (G-10) to the two instruction portions of the gear shaft as shown in the figure, and attach it to the gear block.
3.
Attach the gear block. Apply the adhesive bond (B-40) to the two screws, and then fix the gear block with these screws as shown in
the figure.
Note:
Rotate the helicoid unit by about 1/2 turn to protrude.
Gear Block
Gear (B)
Gear Shaft
Apply Grease (G-10) (Gear)
Apply Grease (G-10) (Gear)
Apply Grease (G-10) (Two areas)
Apply Adhesive Bond (B-40) (Two areas)
Click on the first or last page to see other SAL500F80 service manuals if exist.