Sony SAL500F80 Service Manual ▷ View online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP13
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-10):
J-6082-618-A
Apply the anti-diffusion agent (A-20) and the grease (G-10) to the instruction portions of the G1 lens folder and the G2 lens folder.
Note:
After assembling, wipe off extra grease.
Apply the Anti-Diffusion Agent (A-20)
(on the inside all circumference in the width of 1 cm)
(on the inside all circumference in the width of 1 cm)
Apply the Anti-Diffusion Agent
(A-20) (All circumferences)
Apply the Grease (G-10)
(All circumferences of threads)
(All circumferences of threads)
5mm
(Do not apply the grease (G-10) within this yange.)
(Do not apply the grease (G-10) within this yange.)
G2 Lens Holder
Apply the Grease (G-10) (All circumferences of threads)
Apply the Anti-Diffusion Agent (A-20) (All circumferences)
G1 Lens Holder
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP14
Adhesive bond (B-10): J-6082-612-A
1.
Screw the G2 stopper into the helicoid unit, and tighten it 5 to 10 mm more from the place where the G2 stopper comes in contact
with the inside parts (G2 hold plate).
Note:
• After tightening, check that the helicoid unit does not clatter when the helicoid unit is shaken.
• Be sure not to tighten the G2 stopper too much.
2.
After performing erform the “4-2. Optical Axis Check/Adjustment”, apply the adhesive bond (B-10) to the two instruction portions of
the G2 stopper to fix it to the helicoid unit.
Helicoid Unit
Apply the Adhesive Bond (B-10)
to Fix G2 Stopper (Two areas)
G2 Stopper
3-1
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
8
7
6
4
6
5
2
3
2
6
9
9
9
24
11
21
10
22
1
12
14
27
31
32
33
35
35
34
36
28
29
29
30
15
16
18
19
20
25
26
13
17
(Note 1)
23
37
A
A
B
C
D
D
(Note 2)
(9 x 40mm)
(9 x 40mm)
(Note 2)
(9 x 40mm)
(9 x 40mm)
C
B
38
38
(Note 3)
(Note 3)
(See Page 3-2.)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. FOCUS CONNECT RING, OUTER BARREL ASSY AND MOUNT BLOCK
DISASSEMBLY
Ref. No.
Part No.
Description
1
2-684-066-01
TAPPING SCREW M1.7X4.0
2
2-684-064-01
SCREW M1.4X2.2
3
2-684-065-01 GROUND SPRING
4
2-689-268-01 REAR LIGHT SHIELD BARREL
5
2-689-207-01 LIGHT SHIELD PLATE
6
2-693-403-01
SCREW M2X5.5
7
2-684-244-01 STOPPER SCREW
8
A-1211-786-A BLOCK, MOUNT
9
2-688-980-01
SCREW M2X5.0
10
2-683-692-01 CHIP (MOUNT INDEX)
11
2-684-073-01 LENS NO. PLATE
12
Selection Parts BLOCK, NORMAL FILTER LENS (Note 1)
12
Selection Parts BLOCK, ND4X FILTER LENS (Note 1)
13
2-888-094-01
TAPPING SCREW M1.7X2.0
14
2-689-269-01 FOCUS HOLD BUTTON BASE
15
2-689-270-01 FOCUS HOLD BUTTON
16
2-689-275-01 DUST PROOFING TAPE
17
2-888-093-01 WASHER (ø3.7 t=0.8)
18
2-684-208-01 CLICK PLATE
NOTE:
•
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
19
2-689-274-01 FLEXIBLE SUBSTRATE SETTING TAPE
20
A-1211-785-A UNIT(FOCUS SCALE WINDOW UNIT)
21
2-695-854-01 LABEL, MODEL NAME
22
2-689-266-01 SHEET (HOLD SHEET)
23
2-684-248-01 TAPE(HOLD SHEET TAPE)
24
A-1211-784-A OUTER BARREL ASSY
25
2-689-247-01 FLEXIBLE SUBSTRATE SETTING TAPE C
26
A-1196-676-A FLEXIBLE UNIT, MAIN
27
2-684-117-01
SCREW M1.6X4.0
28
A-1211-782-A BLOCK, GEAR
29
2-696-819-01 GEAR B
30
2-689-237-01 GEAR SHAFT
31
2-689-214-01 FOCUS STOPPER PIN
32
2-689-245-01 BACK ADJUSTMENT TAPE
33
2-689-206-01 INNER GEAR
34
2-689-264-01 PLATE (FOCUS SCALE PLATE)
35
9-913-210-03 POLYSTER TAPE (BLACK) 10mm (Note 2)
36
2-689-205-01 FOCUS CONNECT RING
37
2-689-271-01 BUTTON BASE SETTING TAPE
38
2-888-347-01 WASHER (Ø4.2 t=0.05) (Note 3)
Ref. No.
Part No.
Description
(Note 1)
Select the part for usage.
(Note 2)
Cut the polyster tape (black) 10mm
(per roll) (Ref. No. 35) for specfied
size.
(per roll) (Ref. No. 35) for specfied
size.
(Note 3)
The washer (Ref.No. 38), washer that
uses it when focus operation is heavy.
Please increase and decrease and adjust
the washers to operate smoothly.
Please increase and decrease and adjust
the washers to operate smoothly.
Ver 1.3 2007.12
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
3-2
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
3-1-2. HELICOID UNIT
DISASSEMBLY
Ref. No.
Part No.
Description
51
2-689-240-01 SPRING WASHER
52
2-689-259-01 LENS (G6)
53
A-1202-189-A HELICOID UNIT
54
A-1196-678-A G2+G4+G5 ASSY
55
2-689-244-01 G2 O-RING
56
2-689-208-01 G2 HOLD PLATE
57
2-689-203-01 G2 STOPPER
Ref. No.
Part No.
Description
58
2-689-243-01 FRICTION SHEET
59
Selection Parts FOCUS RING LINKAGE PIN A-C (Note 1)
60
2-689-239-01 G1 HOLD PIN
61
2-689-238-01 SCREW (G1 ADJUSTMENT SCREW)
62
A-1196-677-A G1+G3+G7 ASSY
63
2-689-200-01 G1 STOPPER
64
2-689-246-01 FOCUS RUBBER RING
58
59
54
53
51
52
55
56
57
(Note 1)
59
62
63
64
60
61
60
61
60
61
(Note 1)
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-3.
according to adjustment etc..
Select the part referring to page 3-3.
Click on the first or last page to see other SAL500F80 service manuals if exist.