Sony SAL500F80 Service Manual ▷ View online
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP02
Adhesive bond (LOCTITE 460)(Note)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Apply the adhesive bond (LOCTITE 460) to the instruction portion of the light shield plate as shown in the figure, and affix it to the rear
light shield barrel.
Rear Light Shield Barrel
Light Shield Plate
Apply the Adhesive Bond (LOCTITE 460)
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP03
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-85):
J-6082-626-A
Adhesive bond (LOCTITE 460)(Note)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
1.
Apply the adhesive bond (LOCTITE 460) to the instruction portion of the stopper screw as shown in the figure
2.
Apply the anti-diffusion agent (A-20) to the instruction portion of the mount block as shown in the figure.
3.
Apply the grease (G-85) under the three claws of the mount block as shown in the figure.
4.
Attach the mount block with the four screws as shown in the figure.
Apply the Grease (G-85) (Under three claws)
Apply the Grease (G-85)
Apply the Anti-Diffusion Agent (A-20)
Apply the Anti-Diffusion Agent (A-20) (All circumference of back side)
Apply the Adhesive Bond
(LOCTITE 460)
(LOCTITE 460)
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP04
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the adhesive bond (LOCTITE 460) to the back side of the mount index, and attach it to the outer barrel assy set.
2.
Apply the anti-diffusion agent (A-20) to the instruction portions of the outer barrel assy set as shown in the figure.
Outer Barrel Assy
Apply the Anti-Diffusion Agent (A-20)
Apply the Anti-Diffusion Agent (A-20)
Apply the Adhesive Bond (LOCTITE 460)
HELP
SAL500F80 (REFLEX 8/500) (500mm F8 Reflex)
HELP05
Adhesive bond (B-10): J-6082-612-A
1.
Affix the flexible substrate setting tape to the main flexible unit. Then, affix the focus hold block of main flexible unit to the outer
barrrel assy.
2.
Attach the click plate and washer to the fixed holding tube set with the screw.
3.
Apply the adhesive bond (B-10) to the head of screw.
4.
Affix the button base set tape to the focus hold button base. Then, affix the focus hold button base to the outer barrrel assy.
Outer Barrel Assy
Dust Proofing Tape
Flexible Substrate Setting Tape
Click Plate
Main Flexible Unit
Washer
Screw
Focus Hold Button
Button Base Setting Tape
Focus Hold Button Base
Apply the Adhesive Bond (B-10)
Click on the first or last page to see other SAL500F80 service manuals if exist.