Sony SAL2470Z Service Manual ▷ View online
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
Apply the grease (G-115)
Apply the grease (G-115)
(All circumference)
(All circumference)
Apply the grease (G-85)
Apply all circumference
Apply all
circumference
circumference
HELP02-03
Anti-diffusion agent (A-20): J-6082-612-A
Grease (G-85): J-6082-626-A
Grease (G-115): J-6082-627-A
1. Apply the anti-diffusion agent (A-20) to the indicated portions of zoom barrel.
2. Apply the grease (G-115) to the indicated portions of zoom barrel.
3. After grease (G-115) dries, apply the grease (G-85) to the indicated portions of zoom barrel.
Apply the anti-diffusion
agent (A-20)
(All circumference)
agent (A-20)
(All circumference)
Apply the anti-diffusion
agent (A-20)
(All circumference)
agent (A-20)
(All circumference)
Apply the grease (G-115)
Apply the grease (G-115)
(All circumference)
(All circumference)
Apply the grease (G-85)
Zoom Barrel
Apply partially
Apply partially
Apply partially
Apply partially
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
HELP02-04
Grease (G-62): J-6082-670-A
Grease (G-115): J-6082-627-A
Grease (G-115): J-6082-627-A
1. Apply the grease (G-62) to the indicated portions of encoder printed wiring board.
Note: After dropping grease, spread it entirely and wipe it slightly.
2. Apply the grease (G-115) to the indicated portions.
Apply the grease (G-62)
Apply the grease (G-115)
Apply the grease (G-115)
Apply the grease (G-115)
(All circumference)
(All circumference)
Focus Encoder
Zoom Encoder
Drop the grease (G-62), spread it entirely
the flexible board and wipe it slightly.
the flexible board and wipe it slightly.
Bayonet part
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
3. Align the two bosses, insert the moter flexible to the hole of outer barrel.
Hole of Outer Barrel
Bosses
Moter Flexible
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
HELP02-05
1.
Fold upward the flexible cable of switch assy at the locations shown in the figure.
2. Inserting the flexible cable of Switch assy in the hole of outer barrel, affix the Switch assy to the outer barrel
by the SW adhesive sheet.
Switch Assy
SW Flexible (Switch Assy)
Step of inside of the outer barrel
Valley fold
SW flexible
SW Adhesive Sheet
Switch Assy
SW
Flexible
Flexible
Outer Barrel
SW Adhesive sheet
(Included in Switch assy)
(Included in Switch assy)
Affix it with no place under
the flexible board.
the flexible board.
3.
Affix the Switch flexible (Switch Assy) to the step of inside of the outer barrel.
Note: Affix it with no place under the flexible board.
Click on the first or last page to see other SAL2470Z service manuals if exist.