Sony SAL2470Z Service Manual ▷ View online
4-8
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
7)
After restarting the PC, insert the PC-CARD-DIO48 in the PC card slot.
8)
The software installation window appears.
Click “Install the software automatically. (Recommended)”.
Fig.4-1-14
9)
The software is detected and installed. When the window below appears, click
[Finish]
to terminate the installation.
Fig.4-1-15
4-9
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
3. Confirmation of PC card setting
1)
Select “All programs” - “MeasumentComputing” - “InstaCal” from the startup menu, and start up the software.
Note:
Depending on the Windows setting, the window below may differ.
Fig.4-1-16
2)
When “PC-CARD-DIO48” is detected, the window below appears. Confirm that the PC-CARD-DIO48” is checked.
Note:
Depending on the slot inserted, the slot No. differs.
Fig.4-1-17
3)
Confirm that “PC-CARD-DIO48” is recognized as “Board#0”.
Note:
If not recognized as “Board#0”, the program does not work properly.
Fig.4-1-18
4)
Click “File” - “Exit” to terminate “InstaCal”.
4-10
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
4. Setting procedure using the half-finished inspection JIG
After confirming the PC card setting, continue the steps.
1)
Connect the USB cable (white) leading from the half-finished inspection JIG to the PC.
2)
It can be automatically used.
3)
Start up [Instacal]. (See page 4-9.)
4)
The menu below appears. Confirm that [USB-1208**] is checked and then click [OK].
Note: “**” may change.
Fig.4-1-19
5)
When the menu below appears, confirm that [PC-CARD-DI048] is displayed in [Board#0] and [USB-1208**] is displayed in
[Board#1].
Note: If they are reversed, the adjustment program does not start up.
Fig.4-1-20
6)
Click [Board#1] to highlight it blue. Then, click the set button at third position from left on the top row.
Fig.4-1-21
4-11
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
7)
Change [No. of channels] to [8 Single Ended].
Fig.4-1-22
8)
Click [OK] and close the menu by clicking its [x].
Note: Do not change the positions to insert the DIO card and USB cable.
5. Startup of Lens Adjustment Program (ActuatorChecker.exe)
1)
Download the file “ActuatorChecker VerX.X.X.X.zip” from Service Fixture and Software of ESI homepage, save and extract it.
2)
Start up “ActuatorChecker.exe” from an arbitrary folder.
3)
If “PC-CARD-DIO48” is properly installed, the window below appears.
Note:
The version of “ActuatorCheker” might be updated.
• Final
• Half
Fig.4-1-23
Fig.4-1-24
Click on the first or last page to see other SAL2470Z service manuals if exist.