Sony SAL2470Z Service Manual ▷ View online
2-8
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
3
4
B-10
B-10
A
HELP02-04
HELP02-03
2-2-3.
(From Page
2-7.)
2-7.)
(See Page
2-9.)
2-9.)
(See Page
2-10.)
2-10.)
G-85
G-85
Anti Slip Rubber
Anti Slip Rubber
Zoom Barrel
Groove is none
Guide
Guide
MR Assy
Brush (Focus)
FOCUS BRUSH
POSITION ADJUSTMENT
POSITION ADJUSTMENT
Outer Barrel Assy
Make the parts
upside down
upside down
HALF COMPLETION
INSPECTION
INSPECTION
2-9
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
A
HELP02-05
HELP02-06
(From Page
2-8.)
2-8.)
Switch Assy
Encoder Printed
Wiring Board
Wiring Board
CZ Label
SW Adhesive Sheet
(Included in Switch assy)
(Included in Switch assy)
Parts made
upside down
upside down
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
HELP
Note for assembling and grease applying positions are shown.
HELP02-01
1. Leave a wrinkle to the motor flexible.
2. Fold it as shown below and fix it with polyimide sheet (6 x 25mm).
Motor Flexible
Board
Polymide Sheet
(6x25mm)
(6x25mm)
Motor Flexible
Motor Flexible
HELP
SAL2470Z (Vario-Sonnar 2.8/24-70 ZA) (Vario-Sonnar T
*
24-70mm F2.8 ZA SSM)
HELP02-02
Adhesive bond (B-10): J-6082-612-A
1. Set the zoom to WIDE end.
2. Assemble the zoom linkage plate and POM cap, attach the zoom linkage plate to insertion hole of
zoom linkage plate of this lens.
Note: Align the direction that the POM cap installs as shown in figure.
3.
Tighten the two screws, Apply the adhesive bond (B-10) to the indicated portions.
Zoom Linkage
Plate
Plate
Zoom Linkage
Plate
Plate
For inside of concave part
Inside
Outside
POM Cap
Insertion hole of
zoom linkage plate
zoom linkage plate
Zoom Linkage
Plate
Plate
Apply the
adhesive bond (B-10)
adhesive bond (B-10)
POM Cap
Click on the first or last page to see other SAL2470Z service manuals if exist.