Sony SAL24105 Service Manual ▷ View online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP35
Affix the light shield sheet A with the polyester tape (black) 10mm in the length of 25mm with two sheets overlaid, starting with the
position opposite to the straight groove of focus cam tube block.
Note:
At this moment, be careful for the polyester tape (black) 10m not to cover by the cam tube.
HELP36
1.
Set the focus cam tube block to “Tele end” by rotating the cam tube in the arrow direction.
2.
Insert the focus operating lever installing block in the focus cam tube block, aligning.
2nd Lens Block
Focus Operating Lever Installing Block
Straight Groove
Focus Cam Tube Block
Cam Groove
Polyester Tape
(20x25mm)
(20x25mm)
Light Shield Sheet A
Reference to Affixing
Focus Cam Tube Block
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP37
Adhesive bond (B-10): J-6082-612-A
1.
Attach the aperture unit holding spring so that the opening of aperture unit holding spring does not cover the cut portion of focus cam
tube block as shown in the figure.
2.
Attach the aperture unit holding spring to the focus cam tube. After adjusting the aperture diameter, apply the adhesive bond (B-10)
to the idicated portion.
Note:
Perform aperture diameter adjustment, referring to 4-16 page.
Apply the adhesive bond (B-10)
Focus Cam Tube
Aperture Operating Plate
Aperture Blade
Aperture Blade Holding Ring
Aperture Unit Holding Spring
Cut Portion
Opening
Aperture Unit Holding
Spring
Spring
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP38
1.
Insert the preset lever of aperture operating plate in the focus cam tube block, aligning it with the cut portion of focus cam tube block.
2.
Rotate the aperture blade holding ring in the arrow direction so that it disappears from the cut portion of focus cam tube block (state
of iris close) as shown in the figure.
Cut Portion
Cut Portion
Focus Cam Tube Block
Focus Cam Tube Block
Aperture Blade Holding Ring
Preset Lever of Aperture Operating Plate
Preset Lever
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP39
Attach the apreture blade, aligning the boss of apreture blade with the boss hole of apreture operating plate.
Note:
At this moment, the preset lever of apreture operating plate should be in the cut portion of aperture blade holding ring.
HELP40
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion (A-20) to the indicated portion of aperture blade holding ring.
2.
Attach the aperture blade, aligning its boss with the boss hole of aperture blade holding ring. At this moment, overlay the aperture
blade clockwise.
3.
Attach the last aperture blade, releasing the blade installed first in the arrow direction.
Cut Portion
Preset Lever
Aperture Operating Plate
Aperture Blade
Boss
Boss Hole
Aperture Blade Holding Ring
Aperture Blade
Boss
Boss
Boss Hole
Boss Hole
Aperture Blade
Aperture Blade Holding Ring
Aperture Blade Holding Ring
Apply the anti-diffusion (A-20)
(Entire circumference)
(Entire circumference)
Click on the first or last page to see other SAL24105 service manuals if exist.