Sony SAL24105 Service Manual ▷ View online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP11
Attach three projections of focus rubber ring along the groove of MF operation ring.
HELP12
1.
Align the lead groove of fixed holding tube with the hole of zoom ring by rotating the zoom ring.
2.
Align the index (center near the distance scale window) of fixed holding tube block with the hood index of 1st lens barrel holder.
Then, insert the 1st lens barrel holder in the focus cam tube block, aligning the cut portion of 1st lens barrel holder with the projec-
tion of focus cam tube block.
3.
Attach the 1st lens barrel holder, aligning the hole of zoom ring with the nut (B) by rotating the first moving frame.
MF Operation Ring
Focus Rubber Ring
Projection
Groove
Zoom Ring
Nut (B)
1st Lens Barrel Holder
Hole
1st Moving Frame
Cut Portion
Hood Index
1st Lens Barrel Holder
Fixed Holding
Tube Block
Tube Block
Zoom Ring
Focus Cam Tube Block
Projection
Hole
Lead Groove
Index Position
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP13
Adhesive bond (B-40): J-6082-614-A
Attach the 1st lens barrel roller and 1st lens barrel guide pin, aligning the nut with the hole of first moving frame (Align the 1st lens barrel
holder with the cut portion of first moving frame.).
HELP14
Adhesive bond (B-10):
J-6082-612-A
Grease (G-85):
J-6082-626-A
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the grease (G-85) to the indicated portion (1/2 of lead groove of indicated portion at inner side) of 1 group lens block.
2.
Apply the adhesive bond (B-10) to three nuts and insert them in the 1 group lens block.
3.
Apply the anti-diffusion agent (A-20) to the indicated portion of 1 group lens block.
Apply the grease (G-85)
Nut
1 Group Lens Block
Apply the adhesive bond (B-10)
2mm
Apply the anti-diffusion agent (A-20)
Nut
Hole
First Moving Frame
First Moving Frame
1st Lens Barrel
Guide Pin
Guide Pin
1st Lens Barrel
Roller
Roller
Apply the adhesive
bond (B-40)
bond (B-40)
1st Lens
Barrel Holder
Barrel Holder
Cut Portion
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP15
Affix the friction sheet to the position shown in the figure.
HELP16
Anti-diffusion agent (A-20): J-6082-611-A
Grease (G-115):
J-6082-617-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion (entire circumference) of first moving frame.
2.
Apply the anti-diffusion agent (A-115) to the indicated portion (three locations) of first moving frame.
First Moving Frame
Friction Sheet
Apply the grease (G-115)
(Slider of 1 group lens frame, six locations)
(Slider of 1 group lens frame, six locations)
Apply the grease (G-115)
(Slider of 1 group lens frame, six locations)
(Slider of 1 group lens frame, six locations)
Apply the grease (G-115)
(Guide roller groove of 1st lens barrel holder,
three locations)
(Guide roller groove of 1st lens barrel holder,
three locations)
First Moving Frame
Apply the anti-diffusion agent (A-20)
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP17
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or the equivalent.
Do no use other adhesive bond such as the instantaneous glue that becomes whitish after dried.
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (LOCTITE 460) to the nut (B) and insert them in the specified holes of first moving frame. (Three locations)
HELP18
Adhesive bond (B-40): J-6082-614-A
1.
Align the cut portion of MF operation ring with the cut portion of torque ring by rotating the MF operation ring.
2.
Align the pinch lever (or pinch lever C) and pinch lever B with the cut portion of torque ring, and insert the pinch lever rotation shafts.
Note:
• Replace the pinch lever C, in case focus clutch mechanism runs idle the pinch lever.
• In case use pinch lever C, replace with two it.
3.
Apply the adhesive bond (B-40) to the pinch lever rotary shaft, and tighten them.
Note:
In case use pinch lever C, tip of the pinch lever rotary shaft is black.
Nut (B)
Nut (B)
Nut (B)
First Moving Frame
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
Apply the adhesive bond
(LOCTITE 460)
(LOCTITE 460)
Cut Pattern
Cut Pattern
Torque Ring
MF Operation
Ring
Ring
MF Operation Ring
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Apply the adhesive bond (B-40)
Scratch Prevention Sheet
Pinch Lever B
Pinch Lever
(Pinch Lever C)
(Pinch Lever C)
Click on the first or last page to see other SAL24105 service manuals if exist.