Sony SAL24105 Service Manual ▷ View online
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP27
Adhesive bond (B-10): J-6082-612-A
1.
Rotate the focus joint tube so that “half of 1 tooth” can be hide out from the support of gear (A, B) block.
2.
Insert the focus ring, aligning its projection (The chip of focus inner gear should locate at the gear (A, B) block) with the cut portion
of fixed holding tube block
3.
Rotate clockwise the focus ring so that distance tube gear engages with the gear block (A, B) lock.
Gear (A, B) Block
EDGE of gear (A, B) block
“1 tooth”
Focus Joint Tube
“1 tooth”
Cut Portion
Cut Portion
Projection
Projection
Focus Ring
Fixed Holding Tube Block
Chip of Focus Inner Gear
Focus Ring
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
4.
Insert the focus stopper in the gap between the fixed holding tube block and the focus ring as shown in the figure.
5.
After focus-shift adjustment, apply the adhesive bond (B-10) to the two screws of focus stopper.
Note:
Perform focus-shift adjustment, refer to 4-25 page.
Focus Stopper
Focus Ring
Fixed Holding Tube Block
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
HELP28
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-60):
J-6082-616-A
Grease (G-85):
J-6082-626-A
1.
Apply the anti-diffusion agent (A-20) to the indicated portion (entire circumference) shown in the figure.
2.
Apply the adhesive bond (B-60) to the position of focus ring shown in the figure.
3.
Affix the focus inner gear, aligning its boss hole with the boss of focus ring.
4.
Affix the polyester tape (black) 10mm of size shown in the figure to the position shown in the figure.
Apply the grease (G-85) to the indicated portion shown in the figure.
Apply the anti-diffusion agent (A-20)
Focus Ring
Apply the adhesive bond (B-60)
Boss
Focus Ring
Focus Ring
Focus Inner Gear
Boss Hole
Focus Ring
Focus Ring Gear
Apply the grease (G-85)
Polyester Tape (Black) 10mm (5x10mm)
HELP
SAL24105 (3.5-4.5/24-105) (24-105mm F3.5-4.5)
5.
Fix the focus inner gear and the focus ring with the clip.
HELP29
Winding the focus scale tube around the focus ring, affix it with the polyester tape (black) 10mm.
Note:
To adjust the focus scale plate position, make the focus scale plate to rotate.
HELP30
1.
Set the focus cam tube block to the Wide end by rotating it counterclockwise, and set the zoom ring to the Wide end.
2.
Insert the linear guide key A and linear guide key B in the key groove of focus cam tube block.
Clip
Note: After fixing, clip them with a clip and
leave it for eight hours.
Focus Ring
Focus Inner Gear
Fucus Scale Plate
Focus Ring
Polyester Tape (Black) 10mm (8x25mm)
Focus Cam Tube Block
Key Groove
Key Groove
Click on the first or last page to see other SAL24105 service manuals if exist.