Sony SAL1855 Service Manual ▷ View online
HELP
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
HELP20
1.
When affixing the ZF Flexible PWB, align it with the affixing index as shown in the illustration below.
HELP21
Grease (FT-210): 7-640-018-91
Grease (SG-310): 7-640-008-88
1.
Apply the grease (SG-310) to the indicated portions of focus drive ring. (Seven locations)
2.
Apply the grease (FT-210) to the inner grooves of focus drive ring. (Three locations)
ZF Flexible PWB
Fixed Hold Ring
Reference to affixing
Apply the grease (SG-310)
(Three locations)
(Three locations)
Focus Drive Ring
Focus Drive Ring
Apply the grease (SG-310)
(Four locations)
(Four locations)
Apply the grease (FT-210)
(Three locations)
(Three locations)
Focus Drive Ring
HELP
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
HELP22
1.
Aligning the groove at the start of focus gear with the projection near the gear inserting portion of fixed hold ring, insert the focus
drive ring.
2.
Rotate the focus drive ring so that the installing portion of focus stopper comes to the oblong hole of fixed hold ring.
3.
Install the focus Stopper and fix it with two screws.
Fixed Hold Ring
Focus Drive Ring
Focus Drive Ring
Fixed Hold Ring
Oblong Hole
Groove
Projection
Gear inserting portion
Start of Focus Gear
Installing portion of
Focus Stopper
Focus Stopper
Focus Stopper
HELP
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
HELP23
How to remove the mount cover
1.
Set claw A free from the groove on lens mount.
2.
Remove claw B.
3.
Set claw C free from the groove on lens mount.
How to attach the mount cover
1.
Press claw C down into the groove on lens mount.
2.
Put claw B on.
3.
Press claw A down into the groove on lens mount.
Claw A
Claw A
Groove on lens mount
Claw B
Claw C
Mount Cover
Mount Cover
Claw A
Groove on lens mount
Claw A
Claw B
Claw C
Mount Cover
Mount Cover
3-1
SAL1855 (DT 3.5-5.6/18-55 SAM) (DT 18-55mm F3.5-5.6 SAM)
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
3. REPAIR PARTS LIST
(See Page 3-2.)
1
2
3
4
5
5
12
12
13
12
10
6
7
(Note 1)
9
(Note 1)
9
(Note 1)
9
8
11
14
15
16
16
11
17
18
20
21
19
19
19
ns
ns
ns ns
ns
Ref. No.
Part No.
Description
1
4-109-021-01 FRONT DECORATION PLATE
2
3-870-678-01 FRONT RING
3
3-870-682-01 FOCUS RUBBER RING
4
3-870-681-01 ZOOM RUBBER RING
5
4-133-575-01 SCREW M1.4X1.2
6
3-870-688-01 ZOOM BRUSH
7
4-134-950-01 ZOOM KEY STOPPER
8
3-870-689-01 FOCUS BRUSH
9
Selection Parts BACK ADJUSTMENT WASHER (Note 1)
10
1-787-830-11 DC MOTOR (GEARED)
11
3-078-890-11 SCREW, TAPPING
12
2-888-094-21 TAPPING SCREW 1.7
13
X-2342-983-1 TUBE ASSY, REAR HOLDING (BLACK)
13
X-2349-331-1 TUBE ASSY,REAR HOLDING_BROWN (BROWN)
14
X-2190-501-3 SWICH PANEL BLOCK (BLACK)
14
X-2349-330-1 SWICH PANEL BLOCK_BROWN (BROWN)
15
4-146-926-01 DOUBLE-COATED ADHESIVE TAPE
16
2-888-094-41 TAPPING SCREW 1.7
17
A-1541-827-A CL-005 MOUNT
18
A-1704-698-A BLOCK, SERVICE EXCLUSIVE OPTICS
19
2-698-464-21 TAPPING SCREW PHI 2
20
4-105-086-01 MOUNT COVER
21
3-870-666-01 SPRING, EXTENSION
Ref. No.
Part No.
Description
(Note
1)
これらの部品は調整などによって使用個数や種類を
選択する必要があります。
選択する必要があります。
3-3ページを参照して選択してください。
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-3.
according to adjustment etc..
Select the part referring to page 3-3.
3-1.
EXPLODED VIEWS
3-1-1. DC MOTOR AND MOUNT BLOCK
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
•
Color Indication of Appearance Parts
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
Example:
(SILVER) : Cabinet’s Color
(Silver) : Parts Color
ns: not supplied
The changed portions from
Ver. 1.2 are shown in blue.
Ver. 1.2 are shown in blue.
Ver. 1.3 2011.11
Click on the first or last page to see other SAL1855 service manuals if exist.