Sony SAL18250 Service Manual ▷ View online
2-6
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
A
B
Focus Linkage Ring
Focus Rubber
Focus Ring Assy
Middle Lens Barrel Assy
HELP02-09
HELP02-07
HELP02-08
HELP02-10
9
0
Focus Gear Ring
Outer Barrel
(See page 2-7.)
(From page 2-5.)
(From page 2-5.)
2-2-3.
HELP
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
HELP
Note for assembling and grease applying positions are shown.
HELP02-01
Assemble the zoom rubber as indicated.
Note:
Install the zoom rubber, facing the chamfered side to the mount.
Zoom Ring
Zoom Rubber
Chamfeving
HELP
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
HELP02-02
1.
Break off the zoom brush to separate into the brush part and the cover part.
2.
Set the assy to the Tele end.
3.
Place the Brush part (Zoom Brush) at the reference point and fix it with the brush tape.
4.
Place the Cover part (Zoom Brush) and fix it with the setting tape B.
5.
Perform the check/adjustment of zoom brush position.
Note:
For check/adjustment, refer to [4-7. ZOOM BRUSH POSITION CHECK/ADJUSTMENT].
Zoom Ring
Cross Section of brush
Reference point
Incision part of pattern
Z.ECD PCB
Setting Tape B
Brush Tape
Brush Tape
Cover part (Zoom Brush)
Brush part (Zoom Brush)
Separate into the brush
part and the cover part
part and the cover part
Brush part
(Zoom Brush)
(Zoom Brush)
Cover part
(Zoom Brush)
(Zoom Brush)
Brush part
(Zoom Brush)
(Zoom Brush)
HELP
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
HELP02-03
Grease (G-36): J-6082-667-A
Grease (G-48): J-6082-669-A
1.
Apply the grease (G-36) and (G-48) to the indicated portions of zoom ring assy.
2.
Apply the grease (G-36) to the zoom linkage coma B by dipping.
3.
Set the zoom of main assy to Wide and the focus to the infinity end.
4.
Adjust the zoom linkage post to the hole on the zoom ring assy and secure the zoom linkage coma B with a screw.
5.
Thread the zoom linkage coma B through the specified hole of zoom ring assy and fix it with screws.
6.
Confirm that the zoom moves smoothly.
Main Assy
Screw
Zoom Ring Assy
Hole
Zoom Linkage Coma B
Hole
Zoom Linkage Post
Zoom Ring Assy
Zoom Ring
Assy
Assy
Apply the grease (G-36)
Apply the greas
(G-48)
(G-48)
Apply the grease (G-36)
(Dip thoroughly)
(Dip thoroughly)
Click on the first or last page to see other SAL18250 service manuals if exist.