Sony SAL18250 Service Manual ▷ View online
4-1
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
4. ADJUSTMENTS
Note:
After the service repair, perform the adjustments referring to this section.
4-1.
PREPARATIONS
4-1-1. List of Service Tools and Equipments
• Variable Transformer (Output voltage: AC 100 V) (Note 3)
• Camera DSLR-A100
• Compact Flash (CF) Card (For image saving)
• Screen (Art paper)
• Tape Measure
• Plane Mirror (For SLRs)
• Adhesive bond (B-10): J-6082-612-A
• Lens Adjustment Program (ActuatorChecker2.exe)
• PC Card Setup File (InstaCal.exe)
• Color Calculator 2
Note:
Color Calculator 2 is downloadable from the ESI homepage.
Fig. 4-1-1
Personal computer
(Note 1)
(Note 1)
AE master lens
J-6082-597-A
J-6082-597-A
Flange back gauge
(43.50mm)
J-6082-608-A
(43.50mm)
J-6082-608-A
Flange back tester
J-6082-606-A
J-6082-606-A
A-mount
attachment
J-6082-607-A
attachment
J-6082-607-A
Lens test projector
J-6082-605-A
(Note 3)
J-6082-605-A
(Note 3)
1000 mm Collimator
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
110V: J-6082-604-A
240V: J-6082-604-B
(Note 2)
Luminance box
J-6082-581-A
J-6082-581-A
J-1
J-10
J-9
J-7
J-2
J-4
J-6
J-5
J-8
J-12
J-11
J-13
J-3
20
30
40
50
60
70
80
90
0
10
Finished
Inspection
JIG
J-6082-645-A
(Note 4)
Inspection
JIG
J-6082-645-A
(Note 4)
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-A for
universal wrench:
J-6082-609-1
universal wrench:
J-6082-609-1
Chip-B for
universal wrench:
J-6082-609-2
universal wrench:
J-6082-609-2
Aberration
measuring cap
62mm (SAL18250)
J-6082-676-A
measuring cap
62mm (SAL18250)
J-6082-676-A
4-2
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
Note 1:
Personal Computer (PC)
(Color Calculator 2 installed)
OS:
Windows XP
MEMORY:
40 M Byte or more recommended
Hard disk free area: 15 M Byte or more recommended
USB terminal:
Standard equipment
Graphics:
32,000 colors or more recommended VGA monitor
Note 2:
Attach the chart to the 1000 mm collimator as shown in Fig. 4-1-2.
Fig. 4-1-2
Note 3:
Connect the variable transformer (Output voltage:
AC 100 V
) to the lens test projector.
Note 4:
Finished Inspection JIG is
AC 100 V
only.
Align the marks
1000 mm collimator
Chart
4-3
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
4-1-2. Lens Adjustment Program
Check/Adjustment Order
Optical System
Drive System
Focus-Shift/
Flange Back (f'F)
Adjustment
Flange Back (f'F)
Adjustment
Adjustment Parts:
Back Adjustment Washer
2nd Lens Adjustment Washer
(1st Lens Barrel Assy
Position Adjustment)
Back Adjustment Washer
2nd Lens Adjustment Washer
(1st Lens Barrel Assy
Position Adjustment)
Optical Axis Adjustment
(4th Lens barrel-B Assy
Position Adjustment)
Adjustment Parts:
Adjustment Washer (4th lens)
Adjustment Washer (4th lens)
Optical Axis Check
Section 4-3
Zoom Brush Position
Check/Adjustment
Check/Adjustment
Section 4-7
Focus Brush Position
Check/Adjustment
Check/Adjustment
Section 4-8
Finished Inspection
(Actuator Checker2)
Section 4-9
END
Focus-Shift/
Flange Back (f'F) Check
Section 4-5
Focus-Shift Check
(Amount of spherical aberration)
Section 4-6
Projective Resolving
Power Check
Section 4-4
Aperture Diameter Check
Section 4-2
Aperture Diameter Adjustment
OK
OK
OK
OK
OK
OK
NG
NG
NG
NG
NG
Partial Blur Adjustment
(4th Lens barrel-A Assy
Position Adjustment)
Curvature of field
Adjustment
Adjustment
Adjustment Parts:
G12-13 Adjustment Washer
G12-13 Adjustment Washer
Focus-Shift
(aperture) Adjustment
(aperture) Adjustment
Write dSB
OK
OK
4-4
SAL18250 (3.5-6.3/18-250) (DT 18-250mm F3.5-6.3)
4-1-3. Lens Adjustment Program (ActuatorChecker2)
The lens adjustment program is required for the finished inspection.
Prepare/start the lens adjustment program with the following steps.
Equipment used
• Personal Computer
• Lens Adjustment Program (ActuatorChecker2.exe)
• PC Card Setup File (InstaCal.exe)
Note 1:
Lap top PC with PC card slot on which Windows XP runs
Note 2:
Obtain the PC card setup file (InstaCal.exe) from the ESI homepage.
Note 3:
Obtain the lens adjustment program (ActuatorChecker2 Ver. x.x.x.x.zip) from the ESI homepage.
1. Download of PC card setup file (InstaCal.exe)
1)
Create the “MCC”folder in the C drive.
Fig.4-1-3
2)
Download the file from Service Fixture and Software of ESI homepage, and save it in “C:\MCC”.
3)
Double-click the downloaded file “InstaCal.exe”to extract it.
4)
The window to specify the extract destination folder appears. Click
[Browse...]
.
Fig.4-1-4
Click on the first or last page to see other SAL18250 service manuals if exist.