Sony SAL100M28 Service Manual ▷ View online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP04
1.
Attach the flexible substrate setting tape to the joint tube block.
2.
Attach the main flexible block and flexible pc board (A) as shown in the figure.
3.
Solder the flexible PC board (A) to the main flexible block as shown in the figure.
4.
Attach the flexible substrate setting tape, and fold the main flexible block to fix as shown in the figure.
Joint Tube Block
Main Flexible Block
Flexible PC Board (A)
Flexible Substrate Setting Tape
(5
(5
x
14 mm)
Flexible PC Board (A)
Solder
Main Flexible Block
Flexible Substrate Setting Tape
Fold to attach
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP05
Anti-diffusion agent (A-20): J-6082-611-A
1.
Apply the anti-diffusion agent (A-20) to the instruction part of the joint tube block.
2.
Attach the joint tube block as shown in the figure.
3.
When the flange back (f’F) adjustment, tighten the two screws tentatively as shown in the figure.
Apply the
anti-diffusion
agent (A-20)
anti-diffusion
agent (A-20)
Two screws
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP06
Grease (G-35): J-6082-621A
Apply the grease (G-35) to the instruction part of the coupler and coupler gear.
HELP07
Align the projection of the front lens barrel to CE mark as shown in the figure, and attach it.
Apply the grease (G-35)
Coupler
Coupler Gear
Projection
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP08
Adhesive bond (B-10): J-6082-612-A
Removing the Decoration Ring
1.
Turn the focus operation ring to the infinity slowly until the gap between the fixed barrel and decoration ring appears within the hole
of the middle moving frame (hole for attaching the front lens barrel).
2.
Pour alcohol into the gaps (3 areas) using the tweezers, etc, then leave it for a few minutes.
Note:
Leave it with the lens mount upward to prevent the alcohol from spreading inside.
3.
Grip and remove the decoration ring using the nonskid rubber, etc.
Attaching the Decoration Ring
Apply the adhesive bond (B-10) to the instruction part of the decoration ring.
Middle Moving Frame
Middle Moving Frame
Gap
Decoration Ring
Decoration Ring
Pour alcohol
Hole (for attaching the front lens barrel)
30 mm
Apply the
adhesive
bond (B-10)
adhesive
bond (B-10)
Click on the first or last page to see other SAL100M28 service manuals if exist.