Sony SAL100M28 Service Manual ▷ View online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP21
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
1.
Attach the click plate, and apply the adhesive bond (B-10) to the instruction part as shown in the figure.
2.
Attach the dust proofing tape as shown in the figure.
3.
Apply the adhesive bond (LOCTITE 460) to the instruction part as shown in the figure, and attach the FH button base.
Apply the
adhesive
bond (B-10)
adhesive
bond (B-10)
Screw
Washer
Dust Proofing
Tape
Tape
Dust Proofing Tape
FH Button Base
Apply the
adhesive
bond
(LOCTITE 460)
adhesive
bond
(LOCTITE 460)
Apply the
adhesive
bond
(LOCTITE 460)
adhesive
bond
(LOCTITE 460)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP22
Attach the flexible PC board (A), and attach the FH button back side cover tape and polyester tape (black) 4 mm as shown in the figure.
HELP23
Apply the adhesive bond (LOCTITE 460) to the instruction part of the mount index.
Adhesive bond (LOCTITE 460) (Note)
Note:
Use adhesive bond (LOCTITE 460) or an equivalent article.
Don’t use what becomes white after drying like a quick-drying glue.
Apply the adhesive
bond
(LOCTITE 460)
bond
(LOCTITE 460)
Flexible PC Board (A)
Do not put on each other.
Polyester Tape (Black) 4 mm
(4
(4
x
15 mm)
FH Button Back Side Cover Tape
(20
(20
x
16 mm)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP24
Anti-diffusion agent (A-20): J-6082-611-A
Apply the anti-diffusion agent (A-20) to the instruction part of the outer barrel.
HELP25
Grease (G-35):
J-6082-621-A
Adhesive bond (B-10):
J-6082-612-A
Universal Wrench:
J-6082-609-A
Chip-A For Universal Wrench: J-6082-609-1
Chip-B For Universal Wrench: J-6082-609-2
1.
Apply the grease (G-35) to the instruction part of the focus cam ring holder.
2.
Use the universal wrench, fasten the focus cam ring A holder until it stops, then loosen back by 10 to 15 mm.
Note:
Ensure no rattling.
3.
Apply the adhesive bond (B-10) to the instruction part as shown in the figure.
Apply the anti-diffusion agent
(A-20) (All circumference)
(A-20) (All circumference)
All circumference
All circumference
Circumference of the
Focus Scale Window.
Focus Scale Window.
10 mm
2 points for approx. 10 mm long.
Apply the adhesive bond (B-10)
Apply the grease (G-35) (All circumference)
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
Apply the grease
(G-35) (Both sides)
(G-35) (Both sides)
Apply the grease (G-35) (Both sides)
HELP26
Grease (G-35): J-6082-621-A
1.
Apply the grease (G-35) to the spacer adjustment washer.
2.
Attach the spacer adjustment washer as shown in the figure.
Click on the first or last page to see other SAL100M28 service manuals if exist.