Sony SAL100M28 Service Manual ▷ View online
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP27
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Adhesive bond (B-40):
J-6082-614-A
1.
Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the focus cam ring A.
2.
Attach the fixed tube block to the midway move frame block.
3.
Apply the adhesive bond (B-40) to the three guide pins and tighten them.
All circumference
Entirely to the
guide
guide
Apply the grease (G-35)
Apply the
anti-diffusion agent
(A-20) (All circumference)
anti-diffusion agent
(A-20) (All circumference)
Apply the adhesive
bond (B-40)
bond (B-40)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Midway Move Frame Block
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP28
Adhesive bond (B-40): J-6082-614-A
1.
Attach the fixed tube block to the midway move frame block.
2.
Apply the adhesive bond (B-40) to the three linear guide pins and tighten them.
HELP29
Adhesive bond (B-10): J-6082-612-A
Adhesive bond (B-40): J-6082-614-A
Attach the gear cover, and apply the adhesive bond (B-10, B-40) to the two screws as shown in the figure.
HELP30
Attach the flexible cover sheet as shown in the figure.
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Apply the
adhesivebond (B-40)
adhesivebond (B-40)
Apply the adhesive bond (B-10)
Apply the
adhesive
bond (B-40)
adhesive
bond (B-40)
Main Flexible Block
Gear Cover
Flexible Cover Sheet
Reference line
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP31
Adhesive bind (B-60): J-6082-616-A
1.
Attach the insulation tape, then attach the flexible substrate setting tape B to the main flexible block.
2.
Match the hole of main flexible block to the hole of outer barrel.
3.
Attach the main flexible block in the direction of the arrow.
4.
Apply the adhesive bind (B-60) to the instruction part as shown in the figure
Note:
Do not adhere the bond (B-60) on the terminals of IC and soldering portion on each device.
In case that the bond is adhere to them, wipe out the adherent bond.
HELP32
Attach the anti refrection tape sheet as shown in the figure.
Insulation Tape (4x10 mm)
Main Flexible Block
Flexible Substrate Setting Tape B
1
Match the holes
2
Reference line
3
Reference line
Apply the adhesive bond (B-60)
(4 points)
(4 points)
Anti Refrection Tape Sheet
Reference line
Ver 1.1 2007.02
SAL100M28 (MACRO 2.8/100) (100mm F2.8 Macro)
HELP
HELP33
Grease (G-35):
J-6082-621-A
Anti-diffusion agent (A-20): J-6082-611-A
Apply the grease (G-35) and anti-diffusion agent (A-20) to the instruction part of the fixed barrel.
HELP34
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the focus stopper and tighten it.
All
circumference
circumference
Entirely to the
guide
guide
All
circumference
circumference
All
circumference
circumference
Friction Sheet
Apply the grease (G-35)
Apply the anti-diffusion agent (A-20)
Apply the adhesive bond (B-40)
Click on the first or last page to see other SAL100M28 service manuals if exist.