Sony DSLR-A300X / DSLR-A350X / SAL55200 Service Manual ▷ View online
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP04
Grease(G-22): J-6082-665-A
1.
Apply the grease (G-22) to indicated portions of the output shaft, gear part and shaft part of the idler.
2.
Install the output shaft and the idler to shown in figure.
3.
Apply the grease (G-22) to indicated portion of the gear base plate B.
4.
Fit the gear base plate B to the main assy as shown in the figure below and secure with two screws.
5.
Confirm the operation of the focus ring.
Note:
Confirm the focus ring operates smooth and comfortably. (Confirm with installing the coupler.)
Output Shaft
Idler
Apply the grease (G-22)
Apply the grease (G-22)
Apply the grease (G-22)
Main Assy
Screw
Idler
Gear Base Plate B
Gear Base Plate B
Output Shaft
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP05
Adhesive bond (B-10): J-6082-612-A
1.
Install the zoom brush to the brush connect plate and secure with a screw.
2.
Install the brush connect plate to the zoom linkage plate in the main assy and secure with a screw.
3.
Adjust the zoom brush to the patterns on the zoom encoder as shown in the figure.
4.
Secure the zoom brush with a screw.
5.
Perform the zoom brush position adjustment. (See page 4-32)
6.
Confirm the zoom brush position with moving it from wide to tele.
7.
Apply the adhesive bond (B-10) to indicated portion of the zoom brush securing screw.
Main Assy
Brush Connect Plate
Screw
Screw
Zoom Brush
Zoom Linkage Plate
Apply the adhesive bond (B-10)
Zoom Brush
Screw
Please match
A
and
B
A
B
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP06
Anti-diffusion agent (A-20): J-6082-611-A
Grease(G-32):
J-6082-666-A
1.
Confirm no malfunction of the focus brush, the focus brush securing screw is secured with the adhesive bond or not and tightened or
not.
2.
Apply the anti-diffusion agent (A-20) to the indicated portion of main assy.
3.
Apply the grease (G-32) to the middle lens barrel in the main assy and the baynet portion on the inside of the zoom ring.
4.
Engage three projections on the zoom ring to three grooves on the main assy mutually.
5.
Apply the grease (G-32) to indicated portions of the zoom linkage plate.
6.
Adjust the hole for screw on the side of the zoom ring to the attachment position of the zoom linkage plate with rotating the zoom
ring and secure the zoom linkage plate with two screws.
Note:
When secure the zoom Linkage plate, set the zoom to wide position.
7.
Confirm the zoom ring operates smooth and comfortably.
Apply the grease (G-32)
Apply the grease (G-32)
Apply the anti-diffusion
agent (A-20)
agent (A-20)
Attachment position
(Zoom Linkage Plate)
(Zoom Linkage Plate)
Main Assy
(WIDE)
(WIDE)
Main Assy
Notch
Notch
Notch
Baynet
Screw
Zoom Ring
Zoom Ring
Zoom Ring
Middle Lens
Barrel
Barrel
Zoom Linkage Plate
Projection
3-1
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
3. REPAIR PARTS LIST
3-1.
EXPLODED VIEWS
3-1-1. MOUNT ASSY, MAIN PCB ASSY AND REAR LENS BARREL
NOTE:
•
-XX and -X mean standardized parts, so they may
have some difference from the original one.
have some difference from the original one.
•
Items marked “*” are not stocked since they are
seldom required for routine service. Some delay
should be anticipated when ordering these items.
seldom required for routine service. Some delay
should be anticipated when ordering these items.
•
The mechanical parts with no reference number in
the exploded views are not supplied.
the exploded views are not supplied.
12
1
3
4
5
6
7
11
10
9
8
2
(See page 3-2.)
13
14
15
15
16
17
18
19
20
21
21
22
23
24
23
(Note 1)
A
A
Ref. No.
Part No.
Description
1
3-276-996-01 UT3.5P1.7X2C3C IB LOCK
2
3-276-997-01 ZOOM RING
3
3-276-999-01 ZOOM LINKAGE PLATE
4
3-277-000-01 2P1.7X2C3C
5
3-277-008-01 ZOOM BRUSH
6
3-277-009-01 LOCK, 2P1.7X2C3C IB LOCK
7
3-277-010-01 BRUSH CONNECT PLATE
8
3-277-011-01 OUTPUT SHAFT
9
3-277-014-01 IDLER
10
3-277-012-01 GEAR BASE PLATE B
11
3-277-013-01 BT2P1.7X4.5C3C
12
3-276-995-01 ZOOM RUBBER
(Note 1)
これらの部品は調整などによって種類を選択する必
要があります。
要があります。
3-3
ページを参照して選択してください。
13
3-277-031-01 REAR LENS BARREL
14
2-683-692-01 CHIP (MOUNT INDEX)
15
3-277-033-01 BT2P1.7X8.5C3C
16
A-1368-097-A MAIN PCB ASSY
17
3-277-035-01 BT2P1.7X3C3C
18
Selection Parts BACK ADJUSTMENT WASHER (Note 1)
19
3-277-034-01 COUPLER
20
A-1368-098-A MOUNT ASSY
21
3-277-058-01 MOUNT FIX SCREW
22
3-277-059-01 REAR LIGHT SHIELD BARREL
23
3-277-061-01 BT1P1.4X3.5GR301
24
3-277-062-01 BT101.7X4GR301
Ref. No.
Part No.
Description
(Note 1)
The number or type of these parts need to be selected
according to adjustment etc..
Select the part referring to page 3-3.
according to adjustment etc..
Select the part referring to page 3-3.
DISASSEMBLY
(JAPANESE)
DISASSEMBLY
(ENGLISH)
Ver. 1.2 2008.11
Click on the first or last page to see other DSLR-A300X / DSLR-A350X / SAL55200 service manuals if exist.