DOWNLOAD Sony DSLR-A300X / DSLR-A350X / SAL55200 Service Manual ↓ Size: 3.53 MB | Pages: 111 in PDF or view online for FREE

Model
DSLR-A300X DSLR-A350X SAL55200
Pages
111
Size
3.53 MB
Type
PDF
Document
Service Manual
Brand
Device
Digital Camera
File
dslr-a300x-dslr-a350x-sal55200.pdf
Date
PREV: Sony SAL18250 (serv.man2) Service Manual

Sony DSLR-A300X / DSLR-A350X / SAL55200 Service Manual ▷ View online

2-1
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
2. DISASSEMBLY
Cut and remove the part of gilt 
which comes off at the point.
(Be careful or some 
pieces of gilt may be left inside) 
NOTE FOR REPAIR
• Make sure that the flat cable and flexible board are not cracked of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, dont’ pull at wire of connector. It is possible that a wire is snapped.
• When installing a connector, dont’ press down at wire of connector.
It is possible that a wire is snapped.
• Do not apply excessive load to the gilded flexible board.
UNIVERSAL WRENCH
In case of the following notches or holes are located in the lens block, etc during disassembling/
assembling the lens, Use the universal wrench.
How to Use
Attach the chip-A or chip-B to the universal wrench.
For the notches: chip-A
For the holes:
chip-B
Match the universal wrench to the holes or notches of the lens block, etc.
Notches
Holes
Universal wrench
J-6082-609-A
Chip-A for 
universal wrench:
J-6082-609-1
Chip-B for 
universal wrench:
J-6082-609-2
Notches
Chip-A
Chip-A
Chip-B
Chip-B
Chip
Fixed screw
Fixed screw
Chip
Match the universal wrench 
to the width of holes or notches.
Universal wrench
Holes
SERVICE TOOLS
 Anti-diffusion agent (A-20): 
J-6082-611-A
 Grease (G-32): 
J-6082-666-A
 Adhesive bond (B-10): 
J-6082-612-A
 Grease (G-22): 
J-6082-665-A
 Grease (G-36): 
J-6082-667-A
 Adhesive bond (LOCTITE 460)
or the equivalent.
A-20
G-32
B-10
G-22
LOCTITE 460
or the equivalent
G-36
 Grease (G-37): 
J-6082-668-A
G-37
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
2-2
2-1. DISASSEMBLY
The following flow chart shows the disassembly procedure.
Note:
This lens can disassemble both the
1st lens side and the mount side. 
Refer to DISASSEMBLY or flow chart
for disassembly.
Mount Assy
Back Adjustment Washer
Main PCB Assy
Rear Lens Barrel
Zoom Brush
2-2-1. MOUNT ASSY, MAIN PCB ASSY
AND REAR LENS BARREL
First Lens Barrel Assy
G11-13 Lens Barrel Assy
G11-13 Lens
Barrel Assy
G10-11 Adjustment
Washer
G10-11 Adjustment Washer
1st Lens Adjustment Washer
2-2-2. SEMI BARREL ASSY AND
FIRST LENS BARREL ASSY
1
2
3
4
5
7
6
qg
qf
qd
qs
7
A
6
5
3
4
2
1
A
9
qa
q;
8
Idler
Gear Base Plate B
Zoom Rubber
Rear Lens Barrel
Main PCB Assy
Mount Assy
Coupler
Rear Light
Shield Barrel
Back Adjustment
Washer
Zoom Ring
First Lens Barrel Assy
1st Lens Adjustment Washer
2nd Lens Decoration Plate
Semi Barrel Assy
Light Shield Plate
Output Shaft
Zoom Brush
Brush 
Connect 
Plate
Zoom 
Linkage 
Plate
Focus Rubber Ring
REPAIR PART LIST
DISASSEMBLY
2-2-1
REPAIR PART LIST
DISASSEMBLY
2-2-2
2-3
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
EXPLODED VIEW
1
2
3
5
4
6
7
A
A
Note (Assembling)
Make sure the Flexible board
does not protrude out of
the Main PCB Assy.
HELP01
Rear Light
Shield Barrel
Mount Assy
Back Adjustment
Washer
Coupler
HELP03
HELP02
Rear Lens Barrel
Main PCB Assy
FLANGE BACK
ADJUSTMENT
APERTURE 
DIAMETER 
ADJUSTMENT
(See page 2-4.)
G-22
G-37
G-36
G-37
2-2. DETAILS
2-2-1. MOUNT ASSY, MAIN PCB ASSY AND REAR LENS BARREL
2-4
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
8
9
q;
qa
qf
qs
qd
qg
HELP04
HELP04
HELP05
ZOOM BRUSH
POSITION
ADJUSTMENT
HELP04
HELP06
(From page 2-3.)
(See page 2-5.)
Zoom Rubber
Idler
Gear Base Plate B
Output Shaft
Brush Connect
Plate
Zoom Linkage Plate
Zoom Brush
Zoom Ring
Semi Barrel Assy
G-22
G-22
HELP06
B-10
Page of 111
Display

Click on the first or last page to see other DSLR-A300X / DSLR-A350X / SAL55200 service manuals if exist.

RANDOM: