Sony DSLR-A300X / DSLR-A350X / SAL55200 Service Manual ▷ View online
2-5
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
2-2-2. SEMI BARREL ASSY AND FIRST LENS BARREL ASSY
EXPLODED VIEW
1
2
3
4
5
6
7
FOCUS-SHIFT
ADJUSTMENT
ADJUSTMENT
PROJECTIVE
RESOLVING
POWER
(Curvature of field)
ADJUSTMENT
RESOLVING
POWER
(Curvature of field)
ADJUSTMENT
OPTICAL
AXIS
ADJUSTMENT
AXIS
ADJUSTMENT
PROJECTIVE
RESOLVING
POWER (Partial Blur)
ADJUSTMENT
RESOLVING
POWER (Partial Blur)
ADJUSTMENT
FOCUS-SHIFT
(Amount of
speherical
aberration)
ADJUSTMENT
(Amount of
speherical
aberration)
ADJUSTMENT
(From page 2-4.)
G11-13 Barrel Assy
G10-11 Adjustment Washer
SU2.6X2.5C3C
SU2.6X2.5C3C
SU2.6X2.5C3C
Focus Rubber
Universal wrench
J-6082-609-A
J-6082-609-A
Chip-A for
universal wrench:
J-6082-609-1
universal wrench:
J-6082-609-1
First Lens Barrel Assy
1st Lens
Adjustment Washer
Adjustment Washer
2st Lens
Decoration Plate
Decoration Plate
Semi Barrel Assy
Light Shield Plate
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP
Note for assembling and grease applying positions are shown.
HELP01
Grease(G-22): J-6082-665-A
Grease(G-37): J-6082-668-A
1.
Apply the grease (G-37) to indicated portion of back adjustment washer, install the back adjustment washer to the main assy.
2.
Apply the grease (G-22) to indicated portion of coupler, apply the grease (G-37) to indicated portion of the mount assy.
3.
Inserting the installation part of coupler in the groove of back adjustment washer, install the coupler.
4.
Set the zoom to tele position.
5.
While inserting the operation lever of the mount assy into the groove on the aperture operate plate and pushing the main spring outer,
install the mount assy and secure with four mount fix screws.
Note:
Install the mount assy so that the main spring will be in the rear lens barrel.
Install the mount assy so that the main spring doesn't touch the zoom brush.
Apply the grease (G-37)
(mount side)
(mount side)
Apply the grease (G-37)
Apply the grease (G-22)
Coupler
Operation
Lever
Lever
Groove on the
Aperture Operate
Plate
Aperture Operate
Plate
Mount Assy
Main Spring
Main Assy
Mount Fix Screw
Back Adjustment Washer
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP02
1.
Fold the main PCB assy at the locations shown in the figure.
2.
Install the main PCB assy to main assy, tighten the two screws.
3.
Connect the flexible cable of F.ECD board and Z.ECD board to connector.
Note:
Be carefull about the flexible board not to bend too much.
Be carefull about the flexible board not to come out of the main board.
Main Assy
Outside
F. ECD Board
F. ECD Board
Fold upward
Fold downward
Z. ECD Board
Z. ECD Board
Make sure the Flexible board
does not protrude out of
the main PCB assy.
does not protrude out of
the main PCB assy.
Inside
Main PCB Assy
Screw
HELP
SAL55200 (DT 4-5.6/55-200) (DT 55-200mm F4-5.6)
HELP03
Grease(G-36):
J-6082-667-A
Adhesive bond (LOCTITE 460)
Note:
Use the adhesive bond (LOCTITE 460) or an equivalent article.
Do not use what becomes white after drying like quick-drying glue.
1.
Apply the grease (G-36) to indicated portion of the rear lens barrel.
2.
Apply the adhesive bond (LOCTITE 460) to indicated portion of the mount index, affix the mount index to the rear lens barrel.
3.
Set the zoom to wide position, align the “55” of zoom range and the zoom index of rear lens barrel, and tighten the four screws.
Note:
Tighten the screws in the order of 1 to 4.
Apply the grease (G-36)
Apply the adhesive bond (LOCTITE 460)
Rear Lens Barrel
Mount Index
Screw
Zoom Index
Rear Lens Barrel
1
3
2
4
Main Assy
Main Assy
Rear Lens Barrel
4
2
1
3
Click on the first or last page to see other DSLR-A300X / DSLR-A350X / SAL55200 service manuals if exist.